Topic Review Peer Reviewed
Passivhaus
Passivhaus or Passive House buildings are low-energy buildings in which the design is driven by quality and comfort, hence achieving acceptable levels of comfort through post-heating or post-cooling of fresh air. Additionally, Passivhaus building design follows the Passivhaus design criteria, as described in the Passive House Planning Package (PHPP). This article aims to introduce the Passivhaus background, development, and basic design principles. Finally, it also presents a brief description of the performance of Passivhaus buildings. 
  • 2.1K
  • 18 Apr 2022
Topic Review
Trends of Motor Characteristics
It is important to comprehensively evaluate which type of motor is most suitable when designing mechanical systems. This paper presents the results of a survey of the performance of electric and hydraulic servo motors which are commonly used in many mechanical systems and aims to provide quantitative data that can be used as a reference for selecting appropriate motors. We collected data on the characteristics of electric and hydraulic motors and compared and evaluated the characteristics of these servo motors using indexes such as torque, rotating speed, output power, power density, and power rate.
  • 2.2K
  • 20 Jan 2022
Topic Review
Opportunities and Challenges in Developing Ocean Energy Sources
The optimal utilization of renewable energies is a crucial factor toward the realization of sustainability and zero carbon in a future energy system. Tidal currents, waves, and thermal and salinity gradients in the ocean are excellent renewable energy sources. Ocean tidal, osmotic, wave, and thermal energy sources have yearly potentials that exceed the global power demand of 22,848 TWh/y. It is expected that a better insight into ocean energy and a deep understanding of various potential devices can lead to a broader adoption of ocean energy. It is also clear that further research into control strategies is needed. Policy makers should provide financial support for technologies in the demonstration stage and employ road mapping to accelerate the cost and risk reductions to overcome economic hurdles. 
  • 2.2K
  • 23 May 2022
Topic Review
LAV (Armoured Vehicle)
The Light Armoured Vehicle (LAV) is a series of armoured vehicles built by General Dynamics Land Systems – Canada (GDLS-C), a London, Ontario-based subsidiary of General Dynamics. It is a license-produced version of the Mowag Piranha. The LAV family came about from the Armoured Vehicle General Purpose (AVGP) requirement of the Canadian Army. The first generation of LAV was created by Mowag for the Armoured Vehicle General Purpose (AVGP) requirement of the Canadian Army. This was a 6x6 variant of the Piranha I produced by General Motors Diesel in London, Ontario. Since entering service in 1976, it has undergone a number of upgrades. The LAV II introduced the now-familiar 8x8 configuration. The LAV continues to form the backbone of the Canadian Army's combat vehicle fleet. The LAV series of vehicles exist in a number of different variants and are used in a number of different roles such as armoured personnel carriers, engineering vehicles, command posts, ambulances and armoured recovery vehicles.
  • 2.2K
  • 21 Nov 2022
Topic Review
Odor Measurement Methods
Odor pollution related to industrial activities (e.g., chemical industries, oil and gas extraction and refining facilities, waste treatment and disposal facilities) is nowadays acknowledged as a serious environmental concern. Indeed, odors are currently subjected to control and regulation in many countries. Such regulations rely on the possibility of measuring odors. The methods that have been developed and standardized over the last years to measure odors, thereby including sensorial and instrumental techniques, are here described, thereby focusing on their applicability and limitations.
  • 2.2K
  • 08 Feb 2022
Topic Review
Types of Faults on Switchgear
Switchgear is generally known as a switching device. It is used for circuit isolation and the protection of power systems from overload and system faults. The definition of switchgear also includes devices that are utilized to regulate, meter, and control power systems. The term refers to switching and interrupting devices, as well as their combinations with control, instrumentation, metering, protective, and regulating devices, as well as the components of devices involved in dealing with interconnections, items, and supporting structures, which are used primarily in the generation, transmitting distribution, and conversion of electrical power.
  • 2.2K
  • 23 Sep 2022
Topic Review
Autonomous Cruise Control System
Autonomous cruise control (ACC; also called adaptive cruise control, radar cruise control, traffic-aware cruise control or dynamic radar cruise control) is an optional cruise control system for road vehicles that automatically adjusts the vehicle speed to maintain a safe distance from vehicles ahead. Control is based on sensor information from on-board sensors. (No existing system makes use of satellite or roadside infrastructures nor of cooperative support from other vehicles.) Cooperative Adaptive Cruise Control (CACC) further extends the automation of navigation by using information gathered from fixed infrastructure such as satellites and roadside beacons, or mobile infrastructure such as reflectors or transmitters on the back of other vehicles. Such systems may use a radar or laser sensor or a stereo camera setup allowing the vehicle to brake when it detects the car is approaching another vehicle ahead, then accelerate when traffic allows it to. ACC technology is widely regarded as a key component of any future generations of intelligent cars. They impact driver safety and convenience as well as increasing capacity of roads by maintaining optimal separation between vehicles and reducing driver errors. Vehicles with autonomous cruise control are considered a Level 1 autonomous car, as defined by SAE International. Adaptive cruise Control does not provide full autonomy: the system only provides some help to the driver, but does not drive the car by itself. Europe is the main market for Adaptative Cruise control, in 2016.
  • 2.2K
  • 08 Nov 2022
Topic Review
Flat Twin Engine
A flat-twin is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. It is a flat engine with two cylinders. Used in motorcycles for more than a century, flat-twins have also been used in automobiles, light aircraft, stationary powerplants, and household appliances. Early flat-twin motorcycles' engines were mounted with the cylinders in line with the frame. This caused uneven cooling of the cylinders and required the motorcycle to have a long wheelbase. Later flat-twin motorcycles' engines were mounted with their cylinders across the frame for better air cooling and a shorter wheelbase. Disadvantages of this layout include torque reaction in the motorcycle in turns and the potential to damage cylinder heads.
  • 2.2K
  • 27 Oct 2022
Topic Review
De-Icing
De-icing is the process of removing snow, ice or frost from a surface. Anti-icing is understood to be the application of chemicals that not only de-ice but also remain on a surface and continue to delay the reformation of ice for a certain period of time, or prevent adhesion of ice to make mechanical removal easier.
  • 2.2K
  • 31 Oct 2022
Topic Review
Interactivity
Across the many fields concerned with interactivity, including information science, computer science, human-computer interaction, communication, and industrial design, there is little agreement over the meaning of the term "interactivity", but most definitions are related to interaction between users and computers and other machines through a user interface. Interactivity can however also refer to interaction between people. It nevertheless usually refers to interaction between people and computers – and sometimes to interaction between computers – through software, hardware, and networks. Multiple views on interactivity exist. In the "contingency view" of interactivity, there are three levels: One body of research has made a strong distinction between interaction and interactivity. As the suffix 'ity' is used to form nouns that denote a quality or condition, this body of research has defined interactivity as the 'quality or condition of interaction'. These researchers suggest that the distinction between interaction and interactivity is important since interaction may be present in any given setting, but the quality of the interaction varies from low and high.
  • 2.2K
  • 26 Oct 2022
  • Page
  • of
  • 678
Video Production Service