Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
A Reactive Power Compensation Method
One of the main challenges of today’s electrical power engineering is the symmetrization of grid voltages and the minimization of reactive power flows in distribution networks. There are many negative effects associated with asymmetry in power systems, such as increased losses in electric motors, harmonics transferred to DC systems, or phase currents inequality. With the reactive power compensation method, the active power flow can be reduced even in the presence of angular asymmetry between voltage vectors of the utility grid. 
  • 1.3K
  • 09 Feb 2022
Topic Review
Plug-in Electric Vehicles in Sweden
The adoption of plug-in electric vehicles in Sweden is actively supported by the Government of the Kingdom of Sweden. (As of December 2020), a total of 217,704 light-duty plug-in electric vehicles have been registered since 2011, consisting of 148,889 plug-in hybrids, 62,870 all-electric cars, and 5,945 fully electric commercial vans. Sweden has ranked among the world's top ten best-selling plug-in markets since 2015, listed through 2019 as the ninth largest country market. (As of December 2019), the Swedish stock of plug-in passenger cars listed as the sixth largest in Europe. The Swedish plug-in electric market is dominated by plug-in hybrids, representing 75.1% of the Swedish light-duty plug-in electric vehicle registrations through 2018, but began to slightly decline afterwards, reaching 70.3% in 2020. The market share of plug-in electric vehicles climbed from 0.57% in 2013 to 1.53% of new car sales in the country in 2014. The segment market share reached 2.5% in 2015, rose to 5.2% in 2017, 11.3% in 2019, and achieved a record of 32.2% in 2020.
  • 1.3K
  • 05 Nov 2022
Topic Review
3D Bioprinting Technology
3D bioprinting, an additive manufacturing process, is a pioneering technology that prints 3D structures with biocompatible materials including living cells (i.e., bioinks).
  • 1.3K
  • 22 Mar 2022
Topic Review
Innovations and Emerging Cooling Technologies for Greenhouses
The climate control inside the greenhouse constitutes an efficient methodology for maintaining a satisfactory environment that fulfills the requirements of high-yield crops and reduced energy and water resource consumption. In hot climates, the cooling systems, which are assisted by an effective control technique, constitute a suitable path for maintaining an appropriate climate inside the greenhouse, where the required temperature and humidity distribution is maintained.
  • 1.3K
  • 11 Mar 2022
Topic Review
Selected Solid-State Electrolytes
Electrolytes are key components in electrochemical storage systems, which provide an ion-transport mechanism between the cathode and anode of a cell. As battery technologies are in continuous development, there has been growing demand for more efficient, reliable and environmentally friendly materials. Solid-state lithium ion batteries (SSLIBs) are considered as next-generation energy storage systems and solid electrolytes (SEs) are the key components for these systems. Compared to liquid electrolytes, SEs are thermally stable (safer), less toxic and provide a more compact (lighter) battery design. However, the main issue is the ionic conductivity, especially at low temperatures. So far, there are two popular types of SEs: (1) inorganic solid electrolytes (InSEs) and (2) polymer electrolytes (PEs). Among InSEs, sulfide-based SEs are providing very high ionic conductivities (up to 10−2 S/cm) and they can easily compete with liquid electrolytes (LEs). On the other hand, they are much more expensive than LEs. PEs can be produced at less cost than InSEs but their conductivities are still not sufficient for higher performances. 
  • 1.3K
  • 16 Mar 2021
Topic Review
Status and Challenges of Low Carbon Building Design
Excessive carbon emissions are causing the problems of global warming and the greenhouse effect, which urgently need to be controlled worldwide. It is crucial to reduce the carbon emissions of the construction industry as it is one of the main sources. Carbon is generated at all phases of the building life cycle, including in material production, building design, and building operation and maintenance. Notably, building design has various extents of influence on carbon emissions at each phase, for which a low carbon method urgently needs to be explored. The challenges of building design are as follows: lack of (1) a comprehensive standard system considering different factors, (2) lack of a carbon emission calculation method for the design phase, and a (3) no real-time optimization model aiming at carbon reduction. The path of “standard-calculation-prediction-optimization”(SCPO) for future building design is proposed to address these challenges. It takes standard system as the framework, the carbon calculation method as the foundation, the prediction model as the theory, and the low carbon building as the objective.
  • 1.3K
  • 28 Feb 2022
Topic Review
Long Shot
In photography, filmmaking and video production, a long shot (sometimes referred to as a full shot or wide shot) typically shows the entire object or human figure and is usually intended to place it in some relation to its surroundings. These are typically shot now using wide-angle lenses (an approximately 25 mm lens in 35 mm photography and 10 mm lens in 16 mm photography). However, due to sheer distance, establishing shots and extremely wide shots can use almost any camera type.
  • 1.3K
  • 14 Oct 2022
Topic Review
Microchip Implant (Animal)
A microchip implant is an identifying integrated circuit placed under the skin of an animal. The chip, about the size of a large grain of rice, uses passive radio-frequency identification (RFID) technology, and is also known as a PIT (passive integrated transponder) tag. Standard pet microchips are typically 11–13 mm long (approximately ​1⁄2 inch) and 2 mm in diameter. Externally attached microchips such as RFID ear tags are commonly used to identify farm and ranch animals, with the exception of horses. Some external microchips can be read with the same scanner used with implanted chips. Animal shelters, animal control officers and veterinarians routinely look for microchips to return lost pets quickly to their owners, avoiding expenses for housing, food, medical care, outplacing and euthanasia. Many shelters place chips in all outplaced animals. Microchips are also used by kennels, breeders, brokers, trainers, registries, rescue groups, humane societies, clinics, farms, stables, animal clubs and associations, researchers, and pet stores.
  • 1.3K
  • 12 Oct 2022
Topic Review
Power Electronics and Battery Cooling Methods
The global promotion of electric vehicles (EVs) through various incentives has led to a significant increase in their sales. The prolonged charging duration remains a significant hindrance to the widespread adoption of these vehicles and the broader electrification of transportation. While DC-fast chargers have the potential to significantly reduce charging time, they also result in high power demands that the grid and hence may require local battery energy storage systems (BESS) for peak shaving applications. A high power demand also creates high losses and cooling methods play an important role in overall efficiency, sound pollution, system size, reliability, and lifetime of the system.  
  • 1.3K
  • 27 Feb 2023
Topic Review
Substrate Integrated Waveguide
A Substrate integrated waveguide (SIW) (also known as post-wall waveguide or laminated waveguide) is a synthetic rectangular electromagnetic waveguide formed in a dielectric substrate by densely arraying metallized posts or via-holes which connect the upper and lower metal plates of the substrate. The waveguide can be easily fabricated with low-cost mass-production using through-hole techniques where the post walls consists of via fences. SIW is known to have similar guided wave and mode characteristics to conventional rectangular waveguide with equivalent guide wavelength. Since the emergence of new communication technologies in the 1990s, there has been an increasing need for high-performance millimeter-wave systems. These need to be reliable, low-cost, compact, and compatible with high-frequencies. Unfortunately, above 10 GHz, the well known microstrip and coplanar lines technologies cannot be used because they have high insertion and radiation losses at these frequencies. The rectangular waveguide topology can overcome these issues as it offers an excellent immunity against radiation losses and presents low insertion losses. But in their classical form, rectangular waveguide is not compatible with the miniaturization required by modern applications. The concept of SIW was developed in the early 2000s by Ke Wu to reconcile those requirements. The authors presented a platform for integrating all the components of a microwave circuit inside a single substrate, with a rectangular cross-section. Using a single substrate guarantees a limited volume and a simplicity of manufacture, while the rectangular cross-section of the line provides the advantages of the waveguide topology in terms of losses.
  • 1.3K
  • 27 Sep 2022
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback