Topic Review
Aggregation-Induced Emission Active Materials
The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. hexaphenylsilole (HPS) is the common example of the AIE active molecule which exhibits enhancement in fluorescence in an aggregate state. The motions involved, such as restriction of intramolecular motion along with rotation and vibration mechanisms in the AIE active phenomenon, are well explained and accepted. The AIE luminogens have high photostability, large stoke shift, a photobleaching resistance property, and show high sensing reproducibility. This characteristic makes luminogens a promising candidate for sensing application
  • 1.4K
  • 19 Apr 2022
Topic Review
Non-Targeted Effects of Australian and European Synchrotrons
The Australian Synchrotron (AS) and the European Synchrotron Radiation Facility (ESRF) are best configured for a wide range of biomedical research involving animals and future cancer patients. Due to ultra-high dose rates, treatment doses can be delivered within milliseconds, abiding by FLASH radiotherapy principles. In addition, a homogeneous radiation field can be spatially fractionated into a geometric pattern called microbeam radiotherapy (MRT); a coplanar array of thin beams of microscopic dimensions. Both are clinically promising radiotherapy modalities because they trigger a cascade of biological effects that improve tumor control, while increasing normal tissue tolerance compared to conventional radiation. Synchrotrons can deliver high doses to a very small volume with low beam divergence, thus facilitating the study of non-targeted effects of these novel radiation modalities in both in-vitro and in-vivo models. Non-targeted radiation effects studied at the AS and ESRF include monitoring cell–cell communication after partial irradiation of a cell population (radiation-induced bystander effect, RIBE), the response of tissues outside the irradiated field (radiation-induced abscopal effect, RIAE), and the influence of irradiated animals on non-irradiated ones in close proximity (inter-animal RIBE).
  • 486
  • 19 Apr 2022
Topic Review
Pentacene and Its Derivatives Deposition Methods
Pentacene is a well-known conjugated organic molecule with high mobility and a sensitive photo response. It is widely used in electronic devices, such as in organic thin-film transistors (OTFTs), organic light-emitting diodes (OLEDs), photodetectors, and smart sensors. With the development of flexible and wearable electronics, the deposition of good-quality pentacene films in large-scale organic electronics at the industrial level has drawn more research attention. Several methods are used to deposit pentacene thin films. The thermal evaporation technique is the most frequently used method for depositing thin films, as it has low contamination rates and a well-controlled deposition rate. Solution-processable methods such as spin coating, dip coating, and inkjet printing have also been widely studied because they enable large-scale deposition and low-cost fabrication of devices. 
  • 1.5K
  • 18 Apr 2022
Topic Review Peer Reviewed
Passivhaus
Passivhaus or Passive House buildings are low-energy buildings in which the design is driven by quality and comfort, hence achieving acceptable levels of comfort through post-heating or post-cooling of fresh air. Additionally, Passivhaus building design follows the Passivhaus design criteria, as described in the Passive House Planning Package (PHPP). This article aims to introduce the Passivhaus background, development, and basic design principles. Finally, it also presents a brief description of the performance of Passivhaus buildings. 
  • 2.2K
  • 18 Apr 2022
Topic Review
Non-equilibrium Thermodynamic Foundations of the Origin of Life
There is little doubt that life’s origin followed from the known physical and chemical laws of Nature. The most general scientific framework incorporating the laws of Nature and applicable to most known processes to good approximation, is that of thermodynamics and its extensions to treat out-of-equilibrium phenomena. The event of the origin of life should therefore also be amenable to such an analysis. The Thermodynamic Dissipation Theory of the Origin and Evolution of Life postulates that the first molecules of life (the fundamental molecules) were, at their origin, pigments dissipatively structured through photochemical and chemical reactions on the surface of the oceans from simpler and more common precursor molecules in water under the solar long-wavelength UVC (205–285 nm) light of the Archean. They were “designed” by Nature to carry out this thermodynamic imperative of absorbing light in this UVC region and then to dissipate it into heat (longer wavelength photons) released into the environment. 
  • 649
  • 13 Apr 2022
Topic Review
Treatment of Chrysanthemum Synthetic Seeds by SDBD Plasma
Implementation of the surface dielectric barrier discharge (SDBD) plasma treatment before sowing represents a promising strategy for future investigations and sustainable use of cold plasma in synseed biotechnology. Plasma-treated chrysanthemum synseeds showed a better survival rate and overall plantlet growth under greenhouse conditions in comparison to untreated synseeds.
  • 508
  • 12 Apr 2022
Topic Review
Sugar as Snow Analog in Penetration Testing
Understanding the mechanical properties of snow and ice is necessary for the efficient design and construction of cold regions infrastructure. Testing and evaluation is most commonly undertaken in situ or using samples within cold labs. However, there is an inevitable uncertainty as to the accuracy of results obtained from ex situ testing. Therefore, development of suitable proxies for snow, such as sugar or foam, is valuable, potentially enabling further research in this field.
  • 461
  • 06 Apr 2022
Topic Review
Defects and Heteroatoms and Supported Graphene Layers
The possibility of using graphene-based materials as “metal-free” catalysts is attracting enormous interest, since it reduces the need for precious or rare elements currently used in heterogeneous catalysis. However, free standing  and perfect graphene is known to be “perfectly inert”, while it is now well established that there is an essential role of defects and dopants in activating its chemical properties.
  • 899
  • 02 Apr 2022
Topic Review
Colloidal Quantum Dots-Based Upconversion Devices
Colloidal quantum dots (CQD) have narrow emission linewidth and adjustable bandgap, so that CQD based infrared detectors can realize a widely tunable infrared spectral range. In addition, the luminescence spectrum of CQDs is extremely narrow, the color saturation and purity are high, and the optical stability is excellent, which can be obtained by solution procession. Therefore, CQDs-based LEDs (QLEDs) have excellent performances of a wide color gamut, long life, and low cost. For CQD baesd upconverters, except for the top electrode, the entire device can be prepared by solution method, which greatly simplifies the preparation of the device and make the upconverters are available for use in the fields of flexible devices.
  • 631
  • 31 Mar 2022
Topic Review
Electrostatic Dust Cloth
Electrostatic dust cloths (EDC) have been widely used for microbiologic contamination assessment in different indoor and occupational environments. Electrostatic dust cloths are negatively charged allowing dust particles to settle with greater ease.
  • 1.4K
  • 31 Mar 2022
  • Page
  • of
  • 131
ScholarVision Creations