Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Application of 3D Printing Technology in Pavement Maintenance
To examine the application and significance of 3D printing technology in pavement maintenance engineering, a review of the current developments in principles, types, materials, and equipment for 3D printing was conducted. A comparison and analysis of traditional methods and 3D printing for asphalt pavement maintenance led to an investigation of 3D asphalt printing technologies and equipment. As a result, the following suggestions and conclusions are proposed: 3D printing technology can increase the level of automation and standardization of pavement maintenance engineering, leading to effective improvements in worker safety, climate adaptability, repair accuracy, etc. For on-site repair of cracks and minor potholes, utilizing material extrusion technology a mobile 3D asphalt printing robot with a screw extrusion device can be used for accuracy and flexibility. 
  • 320
  • 24 Jul 2023
Topic Review
Application of Additional Conductive Layers
Polymer composites are at increasingly used as structural materials replacing metal alloys due to their high strength-to-weight ratio and corrosion resistance. The conductivity of epoxy resin, depending on its type, ranges from 10−17 to 10−12 S/cm, so it is classified as an insulator, i.e., a material with a conductivity below 10−12 S/cm, while carbon fiber is about 6 × 102 S/cm, which allows it to be classified as a semiconductor, i.e., a material whose conductivity is between 10−12 and 103 S/cm. The EP/CF composite, on the other hand, has a conductivity of about 10−4–10−2 S/cm, that is, it also classifies as a semiconductor. The methods to improve the conductivity have been categorized into three groups: modification of the matrix with conductive fillers, modification of the composite reinforcement, and addition of layers with increased electrical conductivity to the composite. 
  • 534
  • 19 Jul 2022
Topic Review
Application of Analog-to-Digital Converter in Ultrasonic Imaging System
The ADC, a bridge between the analog world and the digital world, converts the analog signals to digital so that the analog signal in the baseband can be processed by the back-end computer or microprocessor.
  • 3.0K
  • 17 Jan 2022
Topic Review
Application of Artificial Intelligence Techniques in Rainfall Forecasting
Various rtificial intelligence techniques (AITs), including artificial neural networks (ANNs), support vector machine (SVM), and Fuzzy logic (FL), have been employed for rainfall forecasting. These techniques have been used to model the relationships between meteorological variables and rainfall and to predict future rainfall based on historical data.
  • 555
  • 01 Sep 2023
Topic Review
Application of Artificial Neural Networks in Construction Management
Artificial neural networks (ANN) exhibit excellent performance in complex problems and have been increasingly applied in the research field of construction management (CM) over the last few decades. This paper aims to provide a comprehensive understanding of the application of ANN in CM research and useful reference for the future.Content analysis is performed to comprehensively analyze 112 related bibliographic records retrieved from seven selected top journals published between 2000 and 2020. The results indicate that the applications of ANN of interest in CM research have been significantly increasing since 2015. Back-propagation was the most widely used algorithm in training ANN. Integrated ANN with fuzzy logic/genetic algorithm was the most commonly em-ployed way of addressing the CM problem. In addition, 11 application fields and 31 research topics were identified, with the primary research interests focusing on cost, performance, and safety.
  • 3.1K
  • 27 Oct 2021
Topic Review
Application of CFD to Food 3D Printing
CFD (Computational Fluid Dynamics) is one of the computer simulation methods used to characterize fluid flow behavior under certain geometries with boundary conditions. The criterion for its performance is how well numerical simulation outcomes align with experimental results conducted under specific conditions, and how well simulations can predict extremely complicated processes that cannot be analyzed in the real world. CFD has gained recognition as an emerging science around the world, particularly since the late 2000s when there was a significant increase in the development and application of CFD to all areas related to fluid behaviors associated with momentum, heat, and mass transfer.
  • 863
  • 12 Nov 2021
Topic Review
Application of Gas Foil Bearings
Gas foil bearing has been widely used in high-speed turbo machinery due to its oil-free, wide temperature range, low cost, high adaptability, high stability and environmental friendliness. In this paper, state-of-the-art investigations of gas foil bearings are reviewed, mainly on the development of the high-speed turbo machinery in China. After decades of development, progress has been achieved in the field of gas foil bearing in China. Small-scale applications of gas foil bearing have been realized in a variety of high-speed turbo machinery. The prospects and markets of high-speed turbo machinery are very broad. Various high-speed turbomachines with gas foil bearings have been developed. Due to the different application occasions, higher reliability requirements are imposed on the foil bearing technology. Therefore, its design principle, theory, and manufacturing technology should be adaptive to new application occasions before mass production. Thus, there are still a number of inherent challenges that must be addressed, for example, thermal management, rotor-dynamic stability and wear-resistant coatings.
  • 2.0K
  • 16 Jul 2021
Topic Review
Application of Graphene Oxide Nano-Channels
Ion and water transport at the Angstrom/Nano scale has always been one of the focuses of experimental and theoretical research. In particular, the surface properties of the angstrom channel and the solid-liquid interface interaction will play a decisive role in ion and water transport when the channel size is small to molecular or angstrom level.
  • 338
  • 14 Jun 2023
Topic Review
Application of Ground Heat Exchangers
Geothermal energy is a widely available, constant source of renewable energy that has shown great potential as an alternative source of energy in achieving global energy sustainability and environment protection. When exploiting geothermal energy, whether is for heating or cooling of buildings, a ground heat exchanger (GHE) is the most important component, whose performance can be easily improved by following the latest design aspects. 
  • 1.9K
  • 26 May 2021
Topic Review
Application of Hydrogels for Bone Regeneration
Hydrogels are versatile biomaterials characterized by three-dimensional, cross-linked, highly hydrated polymeric networks. These polymers exhibit a great variety of biochemical and biophysical properties, which allow for the diffusion of diverse molecules, such as drugs, active ingredients, growth factors, and nanoparticles. Meanwhile, these polymers can control chemical and molecular interactions at the cellular level. The polymeric network can be molded into different structures, imitating the structural characteristics of surrounding tissues and bone defects. Interestingly, the application of hydrogels in bone tissue engineering (BTE) has been gathering significant attention due to the beneficial bone improvement results that have been achieved.
  • 949
  • 29 Jun 2023
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback