Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Urban Road Traffic Spatiotemporal State Estimation
The road traffic state is usually analyzed from a temporal and macroscopic perspective; however, traffic flow parameters, such as density and spacing, can explain the evolution of traffic states from the microscopic perspective and the spatial distribution of vehicles in lanes. 
  • 159
  • 18 Jan 2024
Topic Review
Smart Electrical Networks Based on Renewable Sources
The advent of the Fourth Industrial Revolution facilitates real-time data exchange among a diverse array of intelligent meters for various purposes, enabling the integration of smart grids with Industry 4.0. This integration leads to more efficient and sustainable industrial processes, improved energy management, and cost savings. 
  • 227
  • 18 Jan 2024
Topic Review
Use of Biofuels and (Bio)lubricants in Compression-Ignition Engines
The environmental sustainability of agricultural and industrial vehicles, as well as of the transportation sector, represents one of the most critical challenges to the sustainable development of a nation. In recent decades, compression-ignition engines have been widely used in on-road and off-road vehicles due to their better fuel economy, autonomy, compactness, and mechanical performance (spec. the high torque values). Due to the consistent environmental impact of fossil fuels, scientists are searching for alternative energy sources while preserving the beneficial features of diesel engines. The utilization of blends of diesel fuel, biodiesel, and bioethanol fuel (referred to as “ternary blends”) is among the most promising solutions for replacing fossil fuels in the near term, allowing, at the same time, us to continue using existing vehicles until new technologies are developed, consolidated and adapted to the agricultural and industrial sector. These ternary blends can lower exhaust emissions without creating major problems for existing fuel-feeding systems, typically designed for low-viscosity fossil fuels. One of the concerns in using liquid biofuels, specifically biodiesel, is the high chemical affinity with conventional and bio-based lubricants, so the main parameters of lubricants can vary significantly after a long operation of the engine. The technical challenges and the main research pathways are presented herein.
  • 194
  • 18 Jan 2024
Topic Review
Sensor Fusion Technology in Autonomous Vehicles
Complete autonomous systems such as self-driving cars to ensure the high reliability and safety of humans need the most efficient combination of four-dimensional (4D) detection, exact localization, and artificial intelligent (AI) networking to establish a fully automated smart transportation system. Sensor fusion also called multisensory data fusion or sensor data fusion is used to improve the specific detection task. In AVs, the primary sensors of cameras, radio detection and ranging (RADAR), and light detection and ranging (LiDAR) are used for object detection, localization, and classification.
  • 268
  • 17 Jan 2024
Topic Review
Design Model for Digital Shadow of Value Stream
The value stream method, a key tool in industry to analyze and visualize value streams in production, aims to holistically optimize process steps, reduce waste, and achieve continuous material flow. However, this method primarily relies on data from a single on-site inspection, which is subjective and represents just a snapshot of the process. This limitation can lead to uncertainty and potentially incorrect decisions, especially in industries producing customer-specific products. The increasing digitization in production offers a solution to this limitation by supporting the method through data provision. The concept of the digital shadow emerges as a key tool that systematically captures, processes, and integrates necessary data into a model to enhance traditional value stream mapping. 
  • 141
  • 17 Jan 2024
Topic Review
Brazil’s Formal E-Waste Recycling System
Disruptive innovation has led to the increased obsolescence and accelerated replacement of electrical and electronic equipment, resulting in the rapid growth of waste electrical and electronic equipment (e-waste) worldwide. However, amidst the challenges in e-waste management, the recovery of secondary raw materials from e-waste presents an attractive business opportunity.
  • 246
  • 16 Jan 2024
Topic Review
Enhanced Oil Recovery Techniques
Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. EOR processes involve various methods, including thermal, chemical, gas and microbial methods.
  • 126
  • 16 Jan 2024
Topic Review
Human Activity Recognition in Telemedicine
Telemedicine has the potential to improve access and delivery of healthcare to diverse and aging populations. Recent advances in technology allow for remote monitoring of physiological measures such as heart rate, oxygen saturation, blood glucose, and blood pressure. However, the ability to accurately detect falls and monitor physical activity remotely without invading privacy or remembering to wear a costly device remains an ongoing concern. Human activity involves a series of actions carried out by one or more individuals to perform an action or task, such as sitting, lying, walking, standing, and falling. The field of human activity recognition (HAR) has made remarkable advancements. The primary objective of HAR is to discern a user’s behavior, enabling computing systems to accurately classify and measure human activity.
  • 121.4K
  • 15 Jan 2024
Topic Review
Biodegradable Magnesium Alloys for Biomedical Implants
Biomedical devices made from high-modulus and hardness materials play a critical role in enhancing the quality of life for people with bone-related ailments. While these materials have been successfully used in orthopedic applications, concerns including stress-shielding have necessitated the exploration of alternative solutions. An ideal biomedical implant requires a delicate balance of mechanical performance, corrosion resistance, tissue biocompatibility, and other properties such as tribological performance and osseointegration. Materials such as stainless steel, titanium, and cobalt alloys remain non-degradable throughout the implant’s lifespan. In contrast, certain magnesium alloys can be engineered to degrade safely and under controlled conditions within the body.
  • 250
  • 15 Jan 2024
Topic Review
Topology Optimisation Methods for Satellite Structures
Launching satellites into the Earth’s orbit is a critical area of research, and very demanding satellite services increase exponentially as modern society takes shape. At the same time, the costs of developing and launching satellite missions with shorter development times increase the requirements of novel approaches in the several engineering areas required to build, test, launch, and operate satellites in the Earth’s orbit, as well as in orbits around other celestial bodies. One area with the potential to save launching costs is that of the structural integrity of satellites, particularly in the launching phase where the largest vibrations due to the rocket motion and subsequent stresses could impact the survival ability of the satellite. To address this problem, two important areas of engineering join together to provide novel, complete, and competitive solutions: topology optimisation methods and additive manufacturing. Topology optimisation methods are mathematical methods that allow iteratively optimising structures (usually by decreasing mass) while improving some structural properties depending on the application (load capacity, for instance), through the maximisation or minimisation of a uni- or multi-objective function and multiple types of algorithms. This area has been widely active in general and has two main core types of algorithms: continuum methods that modify continuous parameters such as density, and discrete methods that work by adding and deleting material elements in a meshing context. 
  • 218
  • 15 Jan 2024
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback