Topic Review
Hydrological Model Uncertainties
Hydrological models are a simplified representation of the natural hydrological processes. These models are developed to understand processes, test hypothesis, and support water resources decision-making. However, as they are simplification of the natural processes, they are inherently uncertain. Their uncertainty primarily stems from their structure, parameter, input and calibration data observations. While parameter and structural uncertainties are related to both data information content and process conceptualizations, input and calibration data observations are a result of data information content. In order to enable an improved process understanding and better decision making, a systemic uncertainty analysis of all of the four sources is critical. 
  • 1.9K
  • 08 Jan 2021
Topic Review
Autostereoscopic Displays Based on Various Display Technologies
The autostereoscopic display is a promising way towards three-dimensional-display technology since it allows humans to perceive stereoscopic images with naked eyes. However, it faces great challenges from low resolution, narrow viewing angle, ghost images, eye strain, and fatigue. Nowadays, the prevalent liquid crystal display (LCD), the organic light-emitting diode (OLED), and the emerging micro light-emitting diode (Micro-LED) offer more powerful tools to tackle these challenges. 
  • 1.9K
  • 21 Feb 2022
Topic Review
Interferometric Fiber Optic Sensors
Due to the improvement of living standards, people’s attention to health has gradually increased. More and more people are willing to spend money and time on health management. The vital signs monitoring system based on fiber optic interferometers, including the design of sensor structures, signal demodulation methods and data analysis. After a large number of trials, the system can achieve long-term stable heart rate (HR), respiration rate (RR) and body temperature monitoring, and the collected data can be used for health analysis. Due to the high sensitivity, low cost, and light weight of the interferometric fiber optic sensor, it can be integrated under a mattress or a cushion, which is very suitable for daily use. The system has great application prospects in the field of healthcare. 
  • 1.9K
  • 26 Jan 2022
Topic Review
JTD Engine
Multijet is Fiat Chrysler Automobiles' term for its current common rail direct injection turbodiesel engine range. Most of the Fiat, Alfa Romeo, Lancia range as well as certain Chrysler, RAM Trucks, Jeep and Maserati vehicles are equipped with Multijet engines. Ownership of some Fiat Multijet designs is shared with General Motors as part of a settlement of the failed merger between the two auto conglomerates. GM Powertrain Torino group in Turin, Italy manages their interest in these engines. Some PSA Peugeot Citroën diesel engines are also rebadged JTD units, and vice versa. Fiat's common rail diesel engine is also known as JTD, an initialism of Jet Turbo Diesel.
  • 1.9K
  • 13 Oct 2022
Topic Review
Fibre-Reinforced Polymer at Elevated Temperatures
Fibre-reinforced polymer is a composite material that consists of a polymer matrix and fibre reinforcement. Numerous FRPs have been produced, including basalt fibre-reinforced polymers (BFRP), glass fibre-reinforced polymers (GFRP), aramid fibre-reinforced polymers (AFRP), and carbon fibre-reinforced polymers (CFRP).
  • 1.9K
  • 28 Mar 2022
Topic Review
Life Cycle Assessment in Aviation
With growing environmental awareness and the resulting pressure on aviation, ecological impact assessments are becoming increasingly important. Life cycle assessment has been widely used in the literature as a tool to assess the environmental impact of aircraft. In the following, a brief overview of the existing research on the topic of life cycle assessment in aviation is given. This is concluded with a short summary and an introduction to a possible combination with discrete-event simulation.
  • 1.9K
  • 09 Sep 2022
Topic Review
Devices Using Qualcomm Snapdragon Systems-on-Chip
This is a list of devices using Qualcomm Snapdragon chips. Snapdragon is a family of mobile system on a chip (SoC) made by Qualcomm for use in smartphones, tablets, and smartbook devices.
  • 1.9K
  • 07 Nov 2022
Topic Review
Downstream Processing of Virus Filter
Virus filtration is a single-use, size-based separation process in which the contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filtration is routinely used as part of the overall virus clearance strategy. Compromised performance of virus filters due to membrane fouling, low throughput and reduced viral clearance, is of considerable industrial significance and is frequently a major challenge.
  • 1.9K
  • 24 Apr 2022
Topic Review
EM-2 Rifle
The EM-2, also known as Rifle No.9 Mk1 or Janson rifle, was an experimental United Kingdom assault rifle. It was briefly adopted by British forces in 1951, but the decision was overturned very shortly thereafter by Winston Churchill's incoming government in an effort to secure NATO standardisation of small arms and ammunition. An innovative weapon with the compact bullpup layout and an optical sight, it used one of the early intermediate cartridges (a concept introduced by the Germans with the 7.92×33mm Kurz) as a result of combat experience and German advances in weapons design during World War II. It used the experimental, intermediate powered, but highly efficient .280 British round, which was designed to replace the venerable .303 round and Lee–Enfield rifle variants which had served since before the turn of the 20th century. The United States claimed the .280 British round was too weak for use in rifles and machine guns, and instead favored the much more powerful 7.62×51mm NATO round. As the EM-2 could not be easily adapted to the longer and more powerful round, it faded from use. However, the bullpup layout for a British service rifle was finally adopted some years later in form of the SA80 assault rifle, the EM-2's spiritual successor, which remains in service today.
  • 1.9K
  • 18 Nov 2022
Topic Review
Spinal-Deformities and Advancement in Corrective-Orthoses
Spinal deformity is an abnormality in the spinal curves and can seriously affect the activities of daily life. The conventional way to treat spinal deformities, such as scoliosis, kyphosis, and spondylolisthesis, is to use spinal orthoses (braces). Braces have been used for centuries to apply corrective forces to the spine to treat spinal deformities or to stabilize the spine during postoperative rehabilitation. Braces have not modernized with advancements in technology, and very few braces are equipped with smart sensory design and active actuation. There is a need to enable the orthotists, ergonomics practitioners, and developers to incorporate new technologies into the passive field of bracing. 
  • 1.9K
  • 30 Jan 2021
  • Page
  • of
  • 649
Video Production Service