Topic Review
Compaq Presario 2200
The Compaq Presario 2200 is a small form factor desktop PC produced by Compaq from 1997 to 1998. It was produced as a slim, small form factor machine mainly intended for budget-minded consumers. When launched, it had 16 MB of EDO DRAM that was expandable up to 80 MB and a Cyrix MediaGXi microprocessor, clocking at 180 MHz. It did not include an Ethernet port; however, the modem can be swapped out for a compatible 8-bit ISA Ethernet card to allow the computer to be connected to the Internet or a LAN network. There are no USB ports on the computer, even though the small metal flap might suggest that Compaq considered installing USB ports during the time the computer was developed. This computer model is not to be confused with the newer Compaq Presario 2200 laptop computer.
  • 2.2K
  • 09 Nov 2022
Topic Review
International Roughness Index
The International Roughness Index (IRI) is the roughness index most commonly obtained from measured longitudinal road profiles. It is calculated using a quarter-car vehicle math model, whose response is accumulated to yield a roughness index with units of slope (in/mi, m/km, etc.). This performance measure has less stochasticity and subjectivity in comparison to other pavement performance indicators, but it is not completely devoid of randomness. The sources of variability in IRI data include the difference among the readings of different runs of the test vehicle and the difference between the readings of the right and left wheel paths. Despite these facts, since its introduction in 1986, the IRI has become the road roughness index most commonly used worldwide for evaluating and managing road systems. The measurement of IRI is required for data provided to the United States Federal Highway Administration, and is covered in several standards from ASTM International: ASTM E1926 - 08, ASTM E1364 - 95(2005), and others. IRI is also used to evaluate new pavement construction, to determine penalties or bonus payments based on smoothness.
  • 2.2K
  • 31 Oct 2022
Topic Review Peer Reviewed
Passivhaus
Passivhaus or Passive House buildings are low-energy buildings in which the design is driven by quality and comfort, hence achieving acceptable levels of comfort through post-heating or post-cooling of fresh air. Additionally, Passivhaus building design follows the Passivhaus design criteria, as described in the Passive House Planning Package (PHPP). This article aims to introduce the Passivhaus background, development, and basic design principles. Finally, it also presents a brief description of the performance of Passivhaus buildings. 
  • 2.1K
  • 18 Apr 2022
Topic Review
Opportunities and Challenges in Developing Ocean Energy Sources
The optimal utilization of renewable energies is a crucial factor toward the realization of sustainability and zero carbon in a future energy system. Tidal currents, waves, and thermal and salinity gradients in the ocean are excellent renewable energy sources. Ocean tidal, osmotic, wave, and thermal energy sources have yearly potentials that exceed the global power demand of 22,848 TWh/y. It is expected that a better insight into ocean energy and a deep understanding of various potential devices can lead to a broader adoption of ocean energy. It is also clear that further research into control strategies is needed. Policy makers should provide financial support for technologies in the demonstration stage and employ road mapping to accelerate the cost and risk reductions to overcome economic hurdles. 
  • 2.2K
  • 23 May 2022
Topic Review
SpaceX Rocket Engines
Since the founding of SpaceX in 2002, the company has developed four families of rocket engines — Merlin, Kestrel, Draco and SuperDraco — and is currently developing another rocket engine: Raptor.
  • 2.2K
  • 17 Oct 2022
Topic Review
Trends of Motor Characteristics
It is important to comprehensively evaluate which type of motor is most suitable when designing mechanical systems. This paper presents the results of a survey of the performance of electric and hydraulic servo motors which are commonly used in many mechanical systems and aims to provide quantitative data that can be used as a reference for selecting appropriate motors. We collected data on the characteristics of electric and hydraulic motors and compared and evaluated the characteristics of these servo motors using indexes such as torque, rotating speed, output power, power density, and power rate.
  • 2.2K
  • 20 Jan 2022
Topic Review
LAV (Armoured Vehicle)
The Light Armoured Vehicle (LAV) is a series of armoured vehicles built by General Dynamics Land Systems – Canada (GDLS-C), a London, Ontario-based subsidiary of General Dynamics. It is a license-produced version of the Mowag Piranha. The LAV family came about from the Armoured Vehicle General Purpose (AVGP) requirement of the Canadian Army. The first generation of LAV was created by Mowag for the Armoured Vehicle General Purpose (AVGP) requirement of the Canadian Army. This was a 6x6 variant of the Piranha I produced by General Motors Diesel in London, Ontario. Since entering service in 1976, it has undergone a number of upgrades. The LAV II introduced the now-familiar 8x8 configuration. The LAV continues to form the backbone of the Canadian Army's combat vehicle fleet. The LAV series of vehicles exist in a number of different variants and are used in a number of different roles such as armoured personnel carriers, engineering vehicles, command posts, ambulances and armoured recovery vehicles.
  • 2.2K
  • 21 Nov 2022
Topic Review
Odor Measurement Methods
Odor pollution related to industrial activities (e.g., chemical industries, oil and gas extraction and refining facilities, waste treatment and disposal facilities) is nowadays acknowledged as a serious environmental concern. Indeed, odors are currently subjected to control and regulation in many countries. Such regulations rely on the possibility of measuring odors. The methods that have been developed and standardized over the last years to measure odors, thereby including sensorial and instrumental techniques, are here described, thereby focusing on their applicability and limitations.
  • 2.2K
  • 08 Feb 2022
Topic Review
Autonomous Cruise Control System
Autonomous cruise control (ACC; also called adaptive cruise control, radar cruise control, traffic-aware cruise control or dynamic radar cruise control) is an optional cruise control system for road vehicles that automatically adjusts the vehicle speed to maintain a safe distance from vehicles ahead. Control is based on sensor information from on-board sensors. (No existing system makes use of satellite or roadside infrastructures nor of cooperative support from other vehicles.) Cooperative Adaptive Cruise Control (CACC) further extends the automation of navigation by using information gathered from fixed infrastructure such as satellites and roadside beacons, or mobile infrastructure such as reflectors or transmitters on the back of other vehicles. Such systems may use a radar or laser sensor or a stereo camera setup allowing the vehicle to brake when it detects the car is approaching another vehicle ahead, then accelerate when traffic allows it to. ACC technology is widely regarded as a key component of any future generations of intelligent cars. They impact driver safety and convenience as well as increasing capacity of roads by maintaining optimal separation between vehicles and reducing driver errors. Vehicles with autonomous cruise control are considered a Level 1 autonomous car, as defined by SAE International. Adaptive cruise Control does not provide full autonomy: the system only provides some help to the driver, but does not drive the car by itself. Europe is the main market for Adaptative Cruise control, in 2016.
  • 2.2K
  • 08 Nov 2022
Topic Review
Types of Faults on Switchgear
Switchgear is generally known as a switching device. It is used for circuit isolation and the protection of power systems from overload and system faults. The definition of switchgear also includes devices that are utilized to regulate, meter, and control power systems. The term refers to switching and interrupting devices, as well as their combinations with control, instrumentation, metering, protective, and regulating devices, as well as the components of devices involved in dealing with interconnections, items, and supporting structures, which are used primarily in the generation, transmitting distribution, and conversion of electrical power.
  • 2.2K
  • 23 Sep 2022
  • Page
  • of
  • 649
Video Production Service