Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Battery Management System Application
Electric Vehicles (EV) and Hybrid EV (HEV) use Lithium (Li) ion battery packs to drive them. These battery packs possess high specific density and low discharge rates. However, some of the limitations of such Li ion batteries are sensitivity to high temperature and health degradation over long usage. The Battery Management System (BMS) protects the battery against overvoltage, overcurrent etc., and monitors the State of Charge (SOC) and the State of Health (SOH). SOH is a complex phenomenon dealing with the effects related to aging of the battery such as the increase in the internal resistance and decrease in the capacity due to unwanted side reactions. The battery life can be extended by estimating the SOH accurately.
  • 1.2K
  • 06 Apr 2022
Topic Review Video
Waste Plastic Pyrolytic Catalysis
With the increase in demand for plastic use, waste plastic (WP) management remains a challenge in the contemporary world due to the lack of sustainable efforts to tackle it. The increment in WPs is proportional to man’s demand and use of plastics, and these come along with environmental challenges. This increase in WPs, and the resulting environmental consequences are mainly due to the characteristic biodegradation properties of plastics. Landfilling, pollution, groundwater contamination, incineration, and blockage of drainages are common environmental challenges associated with WPs. The bulk of these WPs constitutes polyethene (PE), polyethene terephthalate (PET) and polystyrene (PS). Pyrolysis is an eco-friendly thermo-chemical waste plastic treatment solution for valuable product recovery, preferred over landfilling and incineration solutions.
  • 1.2K
  • 24 Apr 2022
Topic Review
Production Disruption
Two kinds of incentive strategies, cost-sharing and penalty, are examined in dealing with production disruption, with consideration of production process reliability as an endogenous factor for a two-echelon supply chain.
  • 1.2K
  • 21 Feb 2023
Topic Review
Optimization Approaches for Microgrid Energy Management
The microgrids (MG) is a single controllable local power network with distributed energy sources (solar Photovoltaics (PV), wind energy, diesel generator, fuel cell, wave energy, etc.), ESS, controllable distributed loads (households, commercial, industrial, etc.), and advanced energy management systems (EMSs). It can be operated alone or in connection with the utility grid. 
  • 1.2K
  • 07 Dec 2022
Topic Review
Robotics and Agriculture
The world’s population is steadily increasing, necessitating an increased food supply. According to Sylvestere, agricultural production, particularly field agriculture, must increase by 70% by 2050, when the global population is predicted to exceed 9 billion people. Simultaneously, increased agricultural activity leads to the waste and exploitation of irrigation water, fertiliser, and other phytosanitary products, compromising environmental sustainability and farmers’ profits. The employment of robots in agriculture appears to be a potential option in the context of precision agriculture since it enables repetitive labour to be accomplished without losing precision throughout the working day. This sort of application is growing in popularity in robotics research, and a variety of robots are now available for purchase. 
  • 1.2K
  • 25 Jul 2022
Topic Review
Waste Management for Green Concrete Solutions
Reinforced concrete based on ordinary Portland cement (OPC) is one of the most commonly used materials in modern buildings. Due to the global growth of the building industry, concrete components have been partially or completely replaced with waste materials that can be used as binders or aggregates.
  • 1.2K
  • 20 Jun 2022
Topic Review
Wire Arc Additive Manufacturing Process
Wire arc additive manufacturing (WAAM) is an emerging and promising technology for producing medium-to-large-scale metallic components/structures for different industries, i.e., aerospace, automotive, shipbuilding, etc. It is now a feasible alternative to traditional manufacturing processes due to its shorter lead time, low material waste, and cost effectiveness. WAAM has been widely used to produce components using different materials, including copper-based alloy wires, in the past decades. 
  • 1.2K
  • 19 Jun 2023
Topic Review
Architectural Design and Structural Analysis for Steel–Glass Structures
It is well known that finite element analysis (FEA) is a powerful tool when it comes to the design and analysis of complex structures for various load combinations, including light steel curve members. FEA simulations can provide valuable insights into the behaviour of light steel curved members under different load combinations. This enables designers to optimise designs for strength, safety, and cost-effectiveness. Using two commercial 3D software programs, Rhino 7 and Strand7, to complete the FEA simulation of light steel curved members.
  • 1.2K
  • 09 Jun 2023
Topic Review
Methods for Enhanced Oil Recovery from Reservoirs
Development systems, placement and choice of operating mode of wells essentially depend on the geological structure of the reservoir, its volume and properties of oils. An important role in this is the construction of a geological model of the production facility. The used hydrodynamic models of development are based on physical laws, about which oil producers sometimes don’t even suspect, and the authors of the models are not always able to convey it to the real producers. 
  • 1.2K
  • 26 Jun 2023
Topic Review
Reform Boehm System (Clarinet)
The Boehm system is a fingering system for the flute and the clarinet, as a Reform Boehm system the corresponding handle system for the clarinet, connected to a clarinet body, which has a different inner bore than in the original Boehm clarinet , with the aim of producing a different sound character together with another mouthpiece.
  • 1.2K
  • 27 Oct 2022
  • Page
  • of
  • 650
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback