Physical Sciences | Encyclopedia MDPI

Subject:

Sort:

Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)

Type:

All Topic Review Biography

Topic Review

Transactinide Element

In chemistry, transactinide elements (also, transactinides, or super-heavy elements) are the chemical elements with atomic numbers from 104 to 120. Their atomic numbers are immediately greater than those of the actinides, the heaviest of which is lawrencium (atomic number 103). Glenn T. Seaborg first proposed the actinide concept, which led to the acceptance of the actinide series. He also proposed the transactinide series ranging from element 104 to 121 and the superactinide series approximately spanning elements 122 to 153. The transactinide seaborgium was named in his honor. By definition, transactinide elements are also transuranic elements, i.e. have an atomic number greater than uranium (92). The transactinide elements all have electrons in the 6d subshell in their ground state. Except for rutherfordium and dubnium, even the longest-lasting isotopes of transactinide elements have extremely short half-lives, measured in seconds, or smaller units. The element naming controversy involved the first five or six transactinide elements. These elements thus used systematic names for many years after their discovery had been confirmed. (Usually the systematic names are replaced with permanent names proposed by the discoverers relatively shortly after a discovery has been confirmed.) Transactinides are radioactive and have only been obtained synthetically in laboratories. None of these elements has ever been collected in a macroscopic sample. Transactinide elements are all named after physicists and chemists or important locations involved in the synthesis of the elements. IUPAC defines an element to exist if its lifetime is longer than 10−14 seconds, which is the time it takes for the nucleus to form an electron cloud.

2.9K
01 Dec 2022

Topic Review

Holika (Sanskrit: होलिका) was a demoness in Hindu Vedic scriptures, who was burnt to death with the help of God Vishnu. She was the sister of King Hiranyakashipu and aunt of Prahlad. The story of Holika Dahan (Holika's death) signifies the triumph of good over evil. Holika is associated with the annual bonfire on the night before Holi, the Hindu festival of colors.

2.9K
29 Nov 2022

Topic Review

Phosphorus (Morning Star)

Phosphorus (Greek Φωσφόρος Phōsphoros) is the Morning Star, the planet Venus in its morning appearance. Φαοσφόρος (Phaosphoros) and Φαεσφόρος (Phaesphoros) are forms of the same name in some Greek dialects. This celestial object was named when stars and planets were not always distinguished with modern precision. Another Greek name for the Morning Star is Heosphoros (Greek Ἑωσφόρος Heōsphoros), meaning "Dawn-Bringer". The form Eosphorus is sometimes met in English, as if from Ἠωσφόρος (Ēōsphoros), which is not actually found in Greek literature, but would be the form that Ἑωσφόρος would have in some dialects. As an adjective, the Greek word φωσφόρος is applied in the sense of "light-bringing" to, for instance, the dawn, the god Dionysos, pine torches, the day; and in the sense of "torch-bearing" as an epithet of several god and goddesses, especially Hecate but also of Artemis/Diana and Hephaestus. The Latin word lucifer, corresponding to Greek φωσφόρος, was used as a name for the morning star and thus appeared in the Vulgate translation of the Hebrew word הֵילֵל (helel), meaning Venus as the brilliant, bright or shining one, in Isaiah 14:12, where the Septuagint Greek version uses, not φωσφόρος, but ἑωσφόρος. As a translation of the same Hebrew word the King James Version gave "Lucifer", a name often misunderstood as a reference to Satan. Modern translations of the same passage render the Hebrew word instead as "morning star", "daystar", "shining one" or "shining star". In Revelation 22:16, Jesus is referred to as the morning star, but not as lucifer in Latin, nor as φωσφόρος in the original Greek text, which instead has ὁ ἀστὴρ ὁ λαμπρὸς ὁ πρωϊνός (ho astēr ho lampros ho prōinos), literally: the star, the shining one, the dawn. In the Vulgate Latin text of 2 Peter 1:19 the word "lucifer" is used of the morning star in the phrase "until the day dawns and the morning star rises in your hearts", the corresponding Greek word being φωσφόρος.

2.8K
31 Oct 2022

Topic Review

Black Belt (U.S. Region)

The Black Belt is a region of the Southern United States. The term originally described the prairies and dark fertile soil of central Alabama and northeast Mississippi. Because this area in the 19th century was historically developed for cotton plantations based on enslaved African American labor, the term became associated with these conditions. It was generally applied to a much larger agricultural region in the Southern United States, which was characterized by a history of cotton plantation agriculture in the 19th century and a high percentage of African Americans outside metropolitan areas. The enslaved peoples were freed after the American Civil War, and many continued to work in agriculture afterward. Their descendants make up much of the African-American population of the United States. During the first half of the 19th Century, as many as one million enslaved Africans were transported through sales in the domestic slave trade to the Deep South in a forced migration to work as laborers for the region's cotton plantations. After having lived enslaved for several generations in the area, many remained as rural workers, tenant farmers and sharecroppers after the Civil War and emancipation. Beginning in the early 20th century and up to 1970, a total of six million black people left the South in the Great Migration to find work and other opportunities in the industrial cities of the Northeast, Midwest, and West. Because of relative isolation and lack of economic development, the rural communities in the Black Belt have historically faced acute poverty, rural exodus, inadequate education programs, low educational attainment, poor health care, urban decay, substandard housing, and high levels of crime and unemployment. In December 2017, the Special Rapporteur of the Office of the United Nations High Commissioner for Human Rights declared that Alabama was the most impoverished area in the developed world. Given the history of decades of racial segregation into the late 20th century, African-American residents have been the most disproportionately affected, although these problems apply broadly to all ethnic groups in the rural Black Belt. The region and its boundaries have varying definitions, but it is generally considered a band through the center of the Deep South, although stretching from as far north as Delaware to as far west as East Texas.

2.8K
31 Oct 2022

Topic Review

Transmission Electron Microscopy

Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. Transmission electron microscopes are capable of imaging at a significantly higher resolution than light microscopes, owing to the smaller de Broglie wavelength of electrons. This enables the instrument to capture fine detail—even as small as a single column of atoms, which is thousands of times smaller than a resolvable object seen in a light microscope. Transmission electron microscopy is a major analytical method in the physical, chemical and biological sciences. TEMs find application in cancer research, virology, and materials science as well as pollution, nanotechnology and semiconductor research, but also in other fields such as paleontology and palynology. TEM instruments have multiple operating modes including conventional imaging, scanning TEM imaging (STEM), diffraction, spectroscopy, and combinations of these. Even within conventional imaging, there are many fundamentally different ways that contrast is produced, called "image contrast mechanisms". Contrast can arise from position-to-position differences in the thickness or density ("mass-thickness contrast"), atomic number ("Z contrast", referring to the common abbreviation Z for atomic number), crystal structure or orientation ("crystallographic contrast" or "diffraction contrast"), the slight quantum-mechanical phase shifts that individual atoms produce in electrons that pass through them ("phase contrast"), the energy lost by electrons on passing through the sample ("spectrum imaging") and more. Each mechanism tells the user a different kind of information, depending not only on the contrast mechanism but on how the microscope is used—the settings of lenses, apertures, and detectors. What this means is that a TEM is capable of returning an extraordinary variety of nanometer- and atomic-resolution information, in ideal cases revealing not only where all the atoms are but what kinds of atoms they are and how they are bonded to each other. For this reason TEM is regarded as an essential tool for nanoscience in both biological and materials fields. The first TEM was demonstrated by Max Knoll and Ernst Ruska in 1931, with this group developing the first TEM with resolution greater than that of light in 1933 and the first commercial TEM in 1939. In 1986, Ruska was awarded the Nobel Prize in physics for the development of transmission electron microscopy.

2.8K
05 Dec 2022

Topic Review

A year is the orbital period of a planetary body, for example, the Earth, moving in its orbit around the Sun. Due to the Earth's axial tilt, the course of a year sees the passing of the seasons, marked by change in weather, the hours of daylight, and, consequently, vegetation and soil fertility. In temperate and subpolar regions around the planet, four seasons are generally recognized: spring, summer, autumn and winter. In tropical and subtropical regions, several geographical sectors do not present defined seasons; but in the seasonal tropics, the annual wet and dry seasons are recognized and tracked. A calendar year is an approximation of the number of days of the Earth's orbital period, as counted in a given calendar. The Gregorian calendar, or modern calendar, presents its calendar year to be either a common year of 365 days or a leap year of 366 days, as do the Julian calendars; see below. For the Gregorian calendar, the average length of the calendar year (the mean year) across the complete leap cycle of 400 years is 365.2425 days. The ISO standard ISO 80000-3, Annex C, supports the symbol a (for Latin annus) to represent a year of either 365 or 366 days. In English, the abbreviations y and yr are commonly used. In astronomy, the Julian year is a unit of time; it is defined as 365.25 days of exactly 86,400 seconds (SI base unit), totalling exactly 31,557,600 seconds in the Julian astronomical year. The word year is also used for periods loosely associated with, but not identical to, the calendar or astronomical year, such as the seasonal year, the fiscal year, the academic year, etc. Similarly, year can mean the orbital period of any planet; for example, a Martian year and a Venusian year are examples of the time a planet takes to transit one complete orbit. The term can also be used in reference to any long period or cycle, such as the Great Year.

2.8K
14 Oct 2022

Topic Review

Types of snow can be designated by the shape of its flakes, description of how it is falling, and by how it collects on the ground. A blizzard and snow storm indicate heavy snowfalls over a large area, snow squalls give heavy snowfalls over narrow bands, while flurries are used for the lightest snowfall. Types which fall in the form of a ball, rather than a flake, are known as graupel, with sleet and snow grains as types of graupel. Once on the ground, snow can be categorized as powdery when fluffy, granular when it begins the cycle of melting and refreezing, and crud or eventually ice once it packs down into a dense drift after multiple melting and refreezing cycles. When powdering, snow drifts with the wind or ground blizzard, sometimes to the depth of several metres. After attaching to hillsides, blown snow can evolve into a snow slab, which is an avalanche hazard on steep slopes.

2.8K
04 Nov 2022

Biography

Daniel Gabriel Fahrenheit

Daniel Gabriel Fahrenheit FRS (/ˈfærənhaɪt/; German: [ˈfaːʁənhaɪt]; 24 May 1686 – 16 September 1736)[1] was a physicist, inventor, and scientific instrument maker. Fahrenheit was born in Danzig (Gdańsk), then a predominantly German-speaking city in the Pomeranian Voivodeship of the Polish–Lithuanian Commonwealth. He later moved to the Dutch Republic at age 15, where he spent the re

2.8K
22 Nov 2022

Topic Review

In physics, deformation is the continuum mechanics transformation of a body from a reference configuration to a current configuration. A configuration is a set containing the positions of all particles of the body. A deformation can occur because of external loads, intrinsic activity (e.g. muscle contraction), body forces (such as gravity or electromagnetic forces), or changes in temperature, moisture content, or chemical reactions, etc. Strain is related to deformation in terms of relative displacement of particles in the body that excludes rigid-body motions. Different equivalent choices may be made for the expression of a strain field depending on whether it is defined with respect to the initial or the final configuration of the body and on whether the metric tensor or its dual is considered. In a continuous body, a deformation field results from a stress field due to applied forces or because of some changes in the temperature field of the body. The relation between stress and strain is expressed by constitutive equations, e.g., Hooke's law for linear elastic materials. Deformations which cease to exist after the stress field is removed are termed as elastic deformation. In this case, the continuum completely recovers its original configuration. On the other hand, irreversible deformations remain. They exist even after stresses have been removed. One type of irreversible deformation is plastic deformation, which occurs in material bodies after stresses have attained a certain threshold value known as the elastic limit or yield stress, and are the result of slip, or dislocation mechanisms at the atomic level. Another type of irreversible deformation is viscous deformation, which is the irreversible part of viscoelastic deformation. In the case of elastic deformations, the response function linking strain to the deforming stress is the compliance tensor of the material.

2.7K
11 Nov 2022

Topic Review

Space Travel Using Constant Acceleration

Constant acceleration is a proposed aspect of most future forms of space travel. It entails that the propulsion system of whatever kind operate continuously with a steady acceleration, rather than the brief impulsive thrusts used by chemical rockets — for the first half of the journey it constantly pushes the spacecraft towards its destination, and for the last half of the journey it constantly uses backthrust, so that the spaceship arrives at the destination at a standstill.

2.7K
11 Oct 2022

Page
of
130

Featured Entry Collections

>>

Featured Books

>>

Encyclopedia of Social Sciences

Encyclopedia of Social Sciences
Chief Editor:
Michael McAleer

Encyclopedia of COVID-19

Encyclopedia of COVID-19
Chief Editor:
Stephen Bustin

Encyclopedia of Fungi

Encyclopedia of Fungi
Chief Editor:
Luis V. Lopez-Llorca

Encyclopedia of Digital Society, Industry 5.0 and Smart City

Encyclopedia of Digital Society, Industry 5.0 and Smart City
Chief Editor:
Sandro Serpa

Video Production Service

Feedback

Top