Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Foams and Emulsions
Foams and emulsions are collections of different kinds of bubbles or drops with particular properties. They provide exceptional sensitive bases for measuring low concentrations of molecules down to the level of traces using spectroscopy techniques, thus opening new horizons in microfluidics. The optical and spectral properties of foams and emulsions provide information about their micro-/nanostructures, chemical and time stability, and molecular data of their components. 
  • 3.9K
  • 19 Apr 2022
Topic Review
Ecliptic Coordinate System
The ecliptic coordinate system is a celestial coordinate system commonly used for representing the apparent positions, orbits, and pole orientations of Solar System objects. Because most planets (except Mercury) and many small Solar System bodies have orbits with only slight inclinations to the ecliptic, using it as the fundamental plane is convenient. The system's origin can be the center of either the Sun or Earth, its primary direction is towards the vernal (March) equinox, and it has a right-hand convention. It may be implemented in spherical or rectangular coordinates.
  • 3.9K
  • 19 Oct 2022
Topic Review
Andhaka
In Hindu mythology, Andhaka (Sanskrit: अन्धक, IAST: andhaka, lit. he who darkens) often refer to a malevolent asura who is killed by Shiva for trying to abduct Parvati. His story finds mention in various Hindu texts, including Matsya Purana, Kurma Purana, Linga Purana and Shiva Purana. He is believed to have thousand heads, two thousand eyes, arms and feet.
  • 3.9K
  • 17 Oct 2022
Topic Review
Uniaxial Tensile Test
Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
  • 3.9K
  • 07 Nov 2022
Topic Review
Proton–Proton Chain
The proton–proton chain, also commonly referred to as the p-p chain, is one of two known sets of nuclear fusion reactions by which stars convert hydrogen to helium. It dominates in stars with masses less than or equal to that of the Sun, whereas the CNO cycle, the other known reaction, is suggested by theoretical models to dominate in stars with masses greater than about 1.3 times that of the Sun. In general, proton–proton fusion can occur only if the kinetic energy (i.e. temperature) of the protons is high enough to overcome their mutual electrostatic repulsion. In the Sun, deuterium-producing events are rare. Diprotons are the much more common result of proton–proton reactions within the star, and diprotons almost immediately decay back into two protons. Since the conversion of hydrogen to helium is slow, the complete conversion of the hydrogen initially in the core of the Sun is calculated to take more than ten billion years. Although sometimes called the "proton–proton chain reaction", it is not a chain reaction in the normal sense. In most nuclear reactions, a chain reaction designates a reaction that produces a product, such as neutrons given off during fission, that quickly induces another such reaction. The proton-proton chain is, like a decay chain, a series of reactions. The product of one reaction is the starting material of the next reaction. There are two main chains leading from Hydrogen to Helium in the Sun. One chain has five reactions, the other chain has six.
  • 3.6K
  • 10 Nov 2022
Topic Review
Atomic Mass Unit
The dalton or unified atomic mass unit (SI symbols: Da or u) is a unit of mass widely used in physics and chemistry. . It is approximately the mass of one nucleon (either a proton or neutron). A mass of 1 Da is also referred to as the atomic mass constant and denoted by mu. Several definitions of this unit have been used, implying slightly different values. The current IUPAC endorsed definition is the unified atomic mass unit, denoted by the symbol u. As of 2019, the International System of Units (SI) lists the dalton, symbol Da, as a unit acceptable for use with the SI unit system and secondarily notes that the dalton (Da) and the unified atomic mass unit (u) are alternative names (and symbols) for the same unit. The symbol Da is more widely used in most fields. It is defined precisely as 1/12 of the mass of an unbound neutral atom of carbon-12 in its nuclear and electronic ground state and at rest. Despite being an official abbreviation for a related obsolete unit and not widely used in the scientific literature, the abbreviation "amu" now often refers to the modern unit (Da or u) in many preparatory texts. As of June 2019, the value recommended by the Committee on Data for Science and Technology (CODATA) is 1.66053906660(50)×10−27 kg, or approximately 1.66 yoctograms. This unit is commonly used in physics and chemistry to express the mass of atomic-scale objects, such as atoms, molecules, and elementary particles. For example, an atom of helium has a mass of about 4 Da, and a molecule of acetylsalicylic acid (aspirin), C9H8O4, has a mass of about 180.16 Da. In general, the standard atomic weight of an element is the average weight of its atom as it occurs in nature, expressed in daltons. The molecular masses of proteins, nucleic acids, and other large polymers are often expressed with the units kilodalton (kDa), equal to 1000 daltons, megadalton (MDa), one million daltons, etc. Titin, one of the largest known proteins, has an atomic mass of between 3 and 3.7 megadaltons. The DNA of chromosome 1 in the human genome has about 249 million base pairs, each with an average mass of about 650 Da, or 156 GDa total. The mole is a unit of amount of substance, widely used in chemistry and physics, which was originally defined so that the mass of one mole of a substance, measured in grams, would be numerically equal to the average mass of one of its constituent particles, measured in daltons. That is, the molar mass of a chemical compound was meant to be numerically equal to its average molecular mass. For example, the average mass of one molecule of water is about 18.0153 daltons, and one mole of water is about 18.0153 grams. A protein whose molecule has an average mass of 64 kDa would have a molar mass of 64 kg/mol. However, while this equality can be assumed for almost all practical purposes, it is now only approximate, because of the way the mole was redefined on 20 May 2019. The mass in daltons of an atom is numerically very close to the number of nucleons A in its atomic nucleus. It follows that the molar mass of a compound (grams per mole) is also numerically close to the average number of nucleons per molecule. However, the mass of an atomic-scale object is affected by the binding energy of the nucleons in its atomic nuclei, as well as the mass and binding energy of the electrons. Therefore, this equality holds only for the carbon-12 atom in the stated conditions, and will vary for other substances. For example, the mass of one unbound atom of the common hydrogen isotope (hydrogen-1, protium) is 1.007825032241(94) Da, the mass of one free neutron is 1.008664915823(491) Da, and the mass of one hydrogen-2 (deuterium) atom is 2.014101778114(122) Da. In general, the difference (mass defect) is less than 0.1%; except for hydrogen (about 0.8%), helium-3 (0.5%), lithium (0.25%) and beryllium (0.15%). The atomic mass unit should not be confused with unit of mass in the atomic units systems, which is instead the electron rest mass (me).
  • 3.6K
  • 31 Oct 2022
Topic Review
Bṛhaspati
Bṛhaspati (Sanskrit: बृहस्पति; meaning spati of briha, the spirit of vastness of the universe written as Brihaspati) is an Indian name, and refers to different mythical figures depending on the age of the text. In ancient Hindu literature Brihaspati is a Vedic era sage who counsels the gods, while in some medieval texts the word refers to the largest planet of the solar system, Jupiter. He taught Bhishma the duties of a king which he later taught it to Vidura.
  • 3.6K
  • 18 Oct 2022
Topic Review
Acoustic Properties of Natural-fiber-based Composites
Recent advancement in controlling noise through sound absorption provides an opportunity to investigate various porous materials including fiber-based composites. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation. Natural-fiber-based composites have advantages such as high abrasive resistance, low emission of toxic fumes with heat, high specific strength, light weight, low cost, and eco-friendliness. Very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications.
  • 3.6K
  • 24 Aug 2021
Topic Review
Bloch Wave
A Bloch wave (also called Bloch state or Bloch function or Bloch wavefunction), named after Swiss physicist Felix Bloch, is a kind of wave function which can be written as a plane wave modulated by a periodic function. By definition, if a wave is a Bloch wave, its wavefunction can be written in the form: where [math]\displaystyle{ \mathbf{r} }[/math] is position, [math]\displaystyle{ \psi }[/math] is the Bloch wave, [math]\displaystyle{ u }[/math] is a periodic function with the same periodicity as the crystal, the wave vector [math]\displaystyle{ \mathbf{k} }[/math] is the crystal momentum vector, [math]\displaystyle{ \mathrm{e} }[/math] is Euler's number, and [math]\displaystyle{ \mathrm{i} }[/math] is the imaginary unit. Bloch waves are important in solid-state physics, where they are often used to describe an electron in a crystal. This application is motivated by Bloch's theorem, which states that the energy eigenstates for an electron in a crystal can be written as Bloch waves (more precisely, it states that the electron wave functions in a crystal have a basis consisting entirely of Bloch wave energy eigenstates). This fact underlies the concept of electronic band structures. These Bloch wave energy eigenstates are written with subscripts as [math]\displaystyle{ \psi_{n\mathbf{k}} }[/math], where [math]\displaystyle{ n }[/math] is a discrete index, called the band index, which is present because there are many different Bloch waves with the same [math]\displaystyle{ \mathbf{k} }[/math] (each has a different periodic component [math]\displaystyle{ u }[/math]). Within a band (i.e., for fixed [math]\displaystyle{ n }[/math]), [math]\displaystyle{ \psi_{n\mathbf{k}} }[/math] varies continuously with [math]\displaystyle{ \mathbf{k} }[/math], as does its energy. Also, for any reciprocal lattice vector [math]\displaystyle{ \mathbf{K} }[/math], [math]\displaystyle{ \psi_{n\mathbf{k}}=\psi_{n(\mathbf{k+K})} }[/math]. Therefore, all distinct Bloch waves occur for values of [math]\displaystyle{ \mathbf{k} }[/math] which fall within the first Brillouin zone of the reciprocal lattice.
  • 3.6K
  • 30 Nov 2022
Topic Review
Deformation (Engineering)
In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve. The relationship between stress and strain is generally linear and reversible up until the yield point and the deformation is elastic. The linear relationship for a material is known as Young's modulus. Above the yield point, some degree of permanent distortion remains after unloading and is termed plastic deformation. The determination of the stress and strain throughout a solid object is given by the field of strength of materials and for a structure by structural analysis. Engineering stress and engineering strain are approximations to the internal state that may be determined from the external forces and deformations of an object, provided that there is no significant change in size. When there is a significant change in size, the true stress and true strain can be derived from the instantaneous size of the object. In the figure it can be seen that the compressive loading (indicated by the arrow) has caused deformation in the cylinder so that the original shape (dashed lines) has changed (deformed) into one with bulging sides. The sides bulge because the material, although strong enough to not crack or otherwise fail, is not strong enough to support the load without change. As a result, the material is forced out laterally. Internal forces (in this case at right angles to the deformation) resist the applied load. The concept of a rigid body can be applied if the deformation is negligible.
  • 3.5K
  • 24 Oct 2022
  • Page
  • of
  • 118
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback