Topic Review
Driving Forces behind Climate Change
Climate change occurs through a complex set of interactive driving forces. According to the Intergovernmental Panel on Climate Change sixth assessment report (AR6; https://wg1.ipcc.ch/index.php/ar6/sixth-assessment-report-ar6; Accessed on 5 November 2022), human activity is the main driving force of climate change, whereas others contend that natural factors are also main causes.
  • 1.3K
  • 06 Dec 2022
Topic Review
Neolithic Subpluvial
The Neolithic Subpluvial, or the Holocene Wet Phase, was an extended period (from about 7500–7000 BCE to about 3500–3000 BCE) of wet and rainy conditions in the climate history of northern Africa. It was both preceded and followed by much drier periods. The Neolithic Subpluvial was the most recent of a number of periods of "Wet Sahara" or "Green Sahara", during which the Sahara region was much moister and supported a richer biota and human population than the present-day desert.
  • 1.3K
  • 24 Oct 2022
Topic Review
Barriers to Electric Vehicle Adoption in Thailand
Electric vehicles (EVs) are considered to be a solution for sustainable transportation. EVs can reduce fossil fuel consumption, greenhouse gas emissions, and the negative impacts of climate change and global warming, as well as help improve air quality.
  • 1.3K
  • 09 Dec 2021
Topic Review
Moisture Pretreatment for a CEMS
A continuous emission monitoring system (CEMS) is a well-known tool used to analyze the concentrations of air pollutants from stationary sources. In a CEMS, the presence of a high moisture level in a sample causes a loss of analytes due to artifact formation or absorption. This issue brings about a bias in the measurement data. Thus, moisture removal is an important pretreatment step.  
  • 1.3K
  • 25 Jan 2021
Topic Review
Spilled Oil in Marine Environment
Oil spill is a widespread environmental problem with significant ecological impacts. When oil is spilled in the sea,  it undergoes different  degradation processes such as dispersion, photooxidation, evaporation, dissolution, emulsion, biodegradation and other weathering processes. The most important among these processes is biodegradation, which is facilitated by naturally occurring oil-degrading bacteria.  The interaction of bacteria with hydrocarbons in oil is affected by different environmental factors.  Several studies have evaluated the effects of each factor on the biodegradation of the oil by bacterial, but none has taken all these factors together.
  • 1.3K
  • 06 Apr 2022
Topic Review
Hydrotalcite as CO2 Sinks for Climate Change Mitigation
Hydrotalcites are known in the bibliography as LDHs (Layered double hydroxides). Hydrotalcites, as such, are not good CO2 absorbents due to poor basic properties and presence of entities that hinder CO2 adsorption and are therefore subjected to thermal treatment (around 500 °C) to obtain nearly amorphous metastable mixed solid solutions known as calcined layered double hydroxides (CLDHs). There are several parameters that can make hydrotalcites suitable for use as CO2 sinks. 
  • 1.3K
  • 11 Jul 2022
Topic Review
Tungsten Resources in Mine Waste
Tungsten is recognized as a critical metal due to its unique properties, economic importance, and limited sources of supply. It has wide applications where hardness, high density, high wear, and high-temperature resistance are required, such as in mining, construction, energy generation, electronics, aerospace, and defense sectors. The two primary tungsten minerals, and the only minerals of economic importance, are wolframite and scheelite. Secondary tungsten minerals are rare and generated by hydrothermal or supergene alteration rather than by atmospheric weathering. There are no reported concerns for tungsten toxicity. However, tungsten tailings and other residues may represent severe risks to human health and the environment. Tungsten metal scrap is the only secondary source for this metal but reprocessing of tungsten tailings may also become important in the future.
  • 1.3K
  • 12 Jul 2021
Topic Review
Selenography
Selenography is the study of the surface and physical features of the Moon. Historically, the principal concern of selenographists was the mapping and naming of the lunar maria, craters, mountain ranges, and other various features. This task was largely finished when high resolution images of the near and far sides of the Moon were obtained by orbiting spacecraft during the early space era. Nevertheless, some regions of the Moon remain poorly imaged (especially near the poles) and the exact locations of many features (like crater depths) are uncertain by several kilometers. Today, selenography is considered to be a subdiscipline of selenology, which itself is most often referred to as simply "lunar science." The word selenography is derived from the Greek lunar deity Σελήνη Selene and γράφω graphō, "I write".
  • 1.3K
  • 11 Nov 2022
Topic Review
Solar Energy Systems into Seawater Desalination
Solar energy, amongst all renewable energies, has attracted inexhaustible attention all over the world as a supplier of sustainable energy. The energy requirement of major seawater desalination processes such as multistage flash (MSF), multi-effect distillation (MED) and reverse osmosis (RO) are fulfilled by burning fossil fuels, which impact the environment significantly due to the emission of greenhouse gases. The integration of solar energy systems into seawater desalination processes is an attractive and alternative solution to fossil fuels. 
  • 1.3K
  • 29 Sep 2022
Topic Review
Reinforcement (Speciation)
Reinforcement is a process of speciation where natural selection increases the reproductive isolation (further divided to pre-zygotic isolation and post-zygotic isolation) between two populations of species. This occurs as a result of selection acting against the production of hybrid individuals of low fitness. The idea was originally developed by Alfred Russel Wallace and is sometimes referred to as the Wallace effect. The modern concept of reinforcement originates from Theodosius Dobzhansky. He envisioned a species separated allopatrically, where during secondary contact the two populations mate, producing hybrids with lower fitness. Natural selection results from the hybrid's inability to produce viable offspring; thus members of one species who do not mate with members of the other have greater reproductive success. This favors the evolution of greater prezygotic isolation (differences in behavior or biology that inhibit formation of hybrid zygotes). Reinforcement is one of the few cases in which selection can favor an increase in prezygotic isolation, influencing the process of speciation directly. This aspect has been particularly appealing among evolutionary biologists. The support for reinforcement has fluctuated since its inception, and terminological confusion and differences in usage over history have led to multiple meanings and complications. Various objections have been raised by evolutionary biologists as to the plausibility of its occurrence. Since the 1990s, data from theory, experiments, and nature have overcome many of the past objections, rendering reinforcement widely accepted,:354 though its prevalence in nature remains unknown. Numerous models have been developed to understand its operation in nature, most relying on several facets: genetics, population structures, influences of selection, and mating behaviors. Empirical support for reinforcement exists, both in the laboratory and in nature. Documented examples are found in a wide range of organisms: both vertebrates and invertebrates, fungi, and plants. The secondary contact of originally separated incipient species (the initial stage of speciation) is increasing due to human activities such as the introduction of invasive species or the modification of natural habitats. This has implications for measures of biodiversity and may become more relevant in the future.
  • 1.3K
  • 28 Apr 2023
  • Page
  • of
  • 271
Video Production Service