Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Most Viewed Latest Alphabetical (A-Z) Alphabetical (Z-A)
Filter:
All Topic Review Biography Peer Reviewed Entry Video Entry
Topic Review
Hybrid Distribution Transformers
Distribution transformers are one of the pillars of the distribution grid. They are the interface between the medium and low-voltage grid, stepping-down the voltages to a safe and usable range for the end-users. 
  • 1.7K
  • 26 Jul 2021
Topic Review
Vulnerabilities and Challenges in IoT-Enabled Smart Grids
Internet of Things (IoT) has appeared as one of the enabling technologies for smart energy grids by delivering abundant cutting-edge solutions in various domains, including critical infrastructures. As IoT-enabled devices continue to flourish, one of the major challenges is security issues, since IoT devices are connected through the Internet, thus making the smart grids vulnerable to a diverse range of cyberattacks. 
  • 1.7K
  • 25 Oct 2022
Topic Review
Virtual Power Plant Optimization in Smart Grids
Virtual power plants (VPPs) are promising solutions to address the decarbonization and energy efficiency goals in the smart energy grid. They assume the coordination of local energy resources such as energy generation, storage, and consumption. They are used to tackle problems brought by the stochastic nature of renewable energy, lack of energy storage devices, or insufficient local energy flexibility on the demand side. VPP modeling, management, and optimization are open to research problems that should consider, on one side, the local constraints in the operation of the energy resources and power flows and the energy grid’s sustainability objectives on the other side. There are multiple goals to create a VPP, such as to deliver energy services on a market or to the grid operator, to operate a microgrid in autonomy decoupled from the main grid, or to sustain local energy communities. 
  • 1.7K
  • 27 May 2022
Topic Review
Single Event Upset
A single event upset (SEU) is a change of state caused by one single ionizing particle (ions, electrons, photons...) striking a sensitive node in a micro-electronic device, such as in a microprocessor, semiconductor memory, or power transistors. The state change is a result of the free charge created by ionization in or close to an important node of a logic element (e.g. memory "bit"). The error in device output or operation caused as a result of the strike is called an SEU or a soft error. The SEU itself is not considered permanently damaging to the transistor's or circuits' functionality unlike the case of single event latchup (SEL), single event gate rupture (SEGR), or single event burnout (SEB). These are all examples of a general class of radiation effects in electronic devices called single event effects (SEE).
  • 1.7K
  • 24 Oct 2022
Topic Review
List of Intel Celeron Microprocessors
The Celeron is a family of microprocessors from Intel targeted at the low-end consumer market. CPUs in the Celeron brand have used designs from sixth- to eighth-generation CPU microarchitectures.
  • 1.7K
  • 06 Dec 2022
Topic Review
Electric Powertrain Architectures in Off-Road Equipment
Though the wave of electric vehicles is transforming the on-road passenger and commercial vehicle fleets, similar attempts in the off-road equipment sector appear to be lacking. Because of the diverse equipment categories and varied applications, electrifying off-road equipment requires significant research and development.
  • 1.7K
  • 26 Aug 2022
Topic Review
Failure Modes of the Electric Motors
The reliability assessment of electric machines plays a very critical role in today’s engineering world. The reliability assessment requires a good understanding of electric motors and their root causes. Electric machines mostly fail due to mechanical problems and bearing damage is the main source of this. The bearings can be damaged by mechanical, electrical, and thermal stresses. Among all stresses, the researcher should give special attention to the electrical one, which is bearing current and shaft voltage.
  • 1.7K
  • 21 Jun 2023
Topic Review
Multi-Microgrid Scheduling
Multi-microgrids address the need for a resilient, sustainable, and cost-effective electricity supply by providing a coordinated operation of individual networks. Due to local generation, dynamic network topologies, and islanding capabilities of hosted microgrids or groups thereof, various new fault mitigation and optimization options emerge. However, with the great flexibility, new challenges such as complex failure modes that need to be considered for a resilient operation, appear. Multi-Microgrid scheduling refers to the procedure of jointly controlling the assets in a multi-microgrid such that the potential of multi-microgrids can be leveraged.
  • 1.7K
  • 26 Oct 2020
Topic Review
Solid State Transformers in Distribution System
Solid State Transformer (SST) is considered to be the most suitable and appropriate conversion device to replace the traditional prevailing transformer. In this device, the weight/volume savings, extensive efficiency enhancement and above all, the cost economization are taken to be the hallmarks. SST configuration comprises of three main stages (i.e., a rectifier, isolation through the HF transformer and finally the DC-AC converter to reproduce line frequency AC).
  • 1.7K
  • 01 Dec 2022
Topic Review
Selection of OCV–SOC Model for Battery Management Systems
A battery management system (BMS) plays a crucial role to ensure the safety, efficiency, and reliability of a rechargeable Li-ion battery pack. State of charge (SOC) estimation is an important operation within a BMS. Estimated SOC is required in several BMS operations, such as remaining power and mileage estimation, battery capacity estimation, charge termination, and cell balancing. The open circuit voltage (OCV) model needs to be stored within the battery management system for real-time SOC estimation. The selection, storage, and processing of OCV models involve several design constraints.
  • 1.7K
  • 28 Sep 2022
Topic Review
Infra-red Search and Track
An infrared search and track (IRST) system (sometimes known as infrared sighting and tracking) is a method for detecting and tracking objects which give off infrared radiation (see Infrared signature) such as jet aircraft and helicopters. IRST is a generalized case of forward looking infrared (FLIR), i.e. from forward-looking to all-round situation awareness. Such systems are passive (thermographic camera), meaning they do not give out any radiation of their own, unlike radar. This gives them the advantage that they are difficult to detect. However, because the atmosphere attenuates infrared to some extent (although not as much as visible light) and because adverse weather can attenuate it also (again, not as badly as visible systems), the range compared to a radar is limited. Within range, angular resolution is better than radar due to the shorter wavelength.
  • 1.7K
  • 14 Oct 2022
Topic Review
Voltage Lifting Techniques for Non-Isolated DC/DC Converters
The conventional boost DC/DC converter is used to step up the input voltage to a desired higher level within the practical limit required by the load with very few components. Stepping up the voltage is achieved by storing the energy in the inductor and releasing it to the output at a higher voltage. The boost converter is very popular for capacitive load applications such as photo-flashers and battery chargers. It is also used in automotive applications, power amplifiers, adaptive control applications, battery power systems, consumer electronics, DC motor drives and power factor correction circuits.
  • 1.7K
  • 02 Mar 2023
Topic Review
Materials for Solar Cells and Supercapacitors
Hybrid systems have gained significant attention among researchers and scientists worldwide due to their ability to integrate solar cells and supercapacitors. Subsequently, this has led to rising demands for green energy, miniaturization and mini-electronic wearable devices. These hybrid devices will lead to sustainable energy becoming viable and fossil-fuel-based sources of energy gradually being replaced. A solar photovoltaic (SPV) system is an electronic device that mainly functions to convert photon energy to electrical energy using a solar power source. 
  • 1.7K
  • 14 Mar 2022
Topic Review
Rotor Dynamic Scattering
Rotor dynamic scattering refers to the phenomenon that a rotating rotor-like component continuously deflects incident radar waves in the observation field to generate dynamic echoes. This scattering feature has obvious dynamic characteristics and periodic characteristics. Factors such as observation angle, radar wave frequency, polarization mode, rotor disc angle and rotor carrier attitude angle are closely related. The emergence of dynamic scattering has transformed the rotor radar cross-section (RCS) problem from static solution to dynamic analysis. Studying rotor dynamic scattering has great engineering value for designing stealth rotors from the dynamic RCS level.
  • 1.7K
  • 30 Oct 2020
Topic Review
Integrated Microfluidic-Based Platforms
Integrated microfluidic platforms (IMPs) refer to diagnostic or analytic platforms that utilize, in part, a microfluidic-based system to facilitate the combination of several different steps of medical diagnoses toward full or partial automation. The integration of microfluidics in novel diagnostic technologies takes advantage of micrometric-scale fluids behaving very differently than fluids at volumes seen in our everyday lives. The two main types of currently existing microfluidic systems are continuous-flow and droplet-based systems that can both be further classified based on their respective materials and detection methods.
  • 1.7K
  • 24 Sep 2021
Topic Review
Self-Discharge of Batteries
Self-discharge of batteries is a natural, but nevertheless quite unwelcome, phenome­non. Be­cause it is driven in its various forms by the same thermodynamic forces as the discharge dur­ing intended op­era­tion of the device it can only be slowed down by impeding the reaction kinet­ics of its vari­ous steps, i.e. their respective rates of reaction. This approach should be based on a deeper understanding of the various modes and mechanisms of self-discharge, which in turn de­pend on the battery chemistry, its mode of op­eration and environmental conditions. Typical exam­ples from representative battery chemis­tries are presented and observed effects are reviewed. As an outcome of a better understanding ap­proaches to reduce self-discharge are presented.
  • 1.7K
  • 22 Feb 2023
Topic Review
GaN-Based LEDs: Modeling and Simulation
Light-emitting diodes (LEDs) based on Gallium Nitride (GaN) have been revolutionizing various applications in lighting, displays, biotechnology, and other fields. Many theoretical models have been developed for GaN-LED simulation, analysis, and design optimization, including carrier transport models, quantum well recombination models, and light extraction models. The overview below is a strongly abbreviated version of Ref. [1].
  • 1.6K
  • 17 Dec 2020
Topic Review
Pentacene and Its Derivatives Deposition Methods
Pentacene is a well-known conjugated organic molecule with high mobility and a sensitive photo response. It is widely used in electronic devices, such as in organic thin-film transistors (OTFTs), organic light-emitting diodes (OLEDs), photodetectors, and smart sensors. With the development of flexible and wearable electronics, the deposition of good-quality pentacene films in large-scale organic electronics at the industrial level has drawn more research attention. Several methods are used to deposit pentacene thin films. The thermal evaporation technique is the most frequently used method for depositing thin films, as it has low contamination rates and a well-controlled deposition rate. Solution-processable methods such as spin coating, dip coating, and inkjet printing have also been widely studied because they enable large-scale deposition and low-cost fabrication of devices. 
  • 1.6K
  • 18 Apr 2022
Topic Review
Multi-Motor Vehicular Systems
With vehicle electrification, autonomous driving, and employment of X-By-Wire technology, mechanical systems are replaced by motor drives improving their efficiency and performance. Thus, vehicular systems are becoming multi-motor systems. In the following,  the case of multi-motor systems in automotive applications is laid out by presenting the different vehicular systems comprising multiple motors.
  • 1.6K
  • 16 Aug 2022
Topic Review
Pianet
The Pianet is a type of electro-mechanical piano built by the Hohner company of Trossingen, West Germany, from the early 1960s to the early 1980s. The designer of the early Pianet models was Ernst Zacharias, basing the mechanism closely on a 1920s design by Lloyd Loar. The Pianet was a variant of the earlier reed-based Hohner electric piano the Cembalet which, like the Pianet, was intended for home use. Hohner offered both keyboards in their range until the early 1970s. The Pianet production consisted of two distinctly different mechanism groups with characteristically different sound. The first group, lasting from introduction to 1977, had ground stainless steel reeds, a pick-up using variable capacitance, and leather faced activation pads. The second group from 1977 until the end of production used rolled spring-steel reeds, electro-magnetic pick-ups, and moulded silicone rubber activation pads.
  • 1.6K
  • 21 Oct 2022
  • Page
  • of
  • 50
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback