Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Most Viewed Latest Alphabetical (A-Z) Alphabetical (Z-A)
Filter:
All Topic Review Biography Peer Reviewed Entry Video Entry
Topic Review
Damping Ratio
Damping is an influence within or upon an oscillatory system that has the effect of reducing, restricting or preventing its oscillations. In physical systems, damping is produced by processes that dissipate the energy stored in the oscillation. Examples include viscous drag in mechanical systems, resistance in electronic oscillators, and absorption and scattering of light in optical oscillators. Damping not based on energy loss can be important in other oscillating systems such as those that occur in biological systems and bikes. The damping ratio is a dimensionless measure describing how oscillations in a system decay after a disturbance. Many systems exhibit oscillatory behavior when they are disturbed from their position of static equilibrium. A mass suspended from a spring, for example, might, if pulled and released, bounce up and down. On each bounce, the system tends to return to its equilibrium position, but overshoots it. Sometimes losses (e.g. frictional) damp the system and can cause the oscillations to gradually decay in amplitude towards zero or attenuate. The damping ratio is a measure describing how rapidly the oscillations decay from one bounce to the next. The damping ratio is a system parameter, denoted by ζ (zeta), that can vary from undamped (ζ = 0), underdamped (ζ < 1) through critically damped (ζ = 1) to overdamped (ζ > 1). The behaviour of oscillating systems is often of interest in a diverse range of disciplines that include control engineering, chemical engineering, mechanical engineering, structural engineering, and electrical engineering. The physical quantity that is oscillating varies greatly, and could be the swaying of a tall building in the wind, or the speed of an electric motor, but a normalised, or non-dimensionalised approach can be convenient in describing common aspects of behavior.
  • 46.6K
  • 12 Oct 2022
Topic Review
Free-Space Path Loss
In telecommunication, the free-space path loss (FSPL) is the attenuation of radio energy between the feedpoints of two antennas that results from the combination of the receiving antenna's capture area plus the obstacle free, line-of-sight path through free space (usually air). The "Standard Definitions of Terms for Antennas", IEEE Std 145-1993, defines "free-space loss" as "The loss between two isotropic radiators in free space, expressed as a power ratio." It does not include any power loss in the antennas themselves due to imperfections such as resistance. Free space loss increases with the square of distance between the antennas because the radio waves spread out due the inverse square law and decreases with the square of the wavelength of the radio waves. The FSPL is rarely used standalone, but rather as a part of the Friis transmission formula, which includes the gain of antennas. It is a factor that must be included in the power link budget of a radio communication system, to ensure that sufficient radio power reaches the receiver that the transmitted signal is received intelligibly.
  • 24.2K
  • 02 Jun 2023
Topic Review
List of Qualcomm Snapdragon Systems-on-chip
This is a list of Qualcomm Snapdragon chips. Snapdragon is a family of mobile system on a chip (SoC) made by Qualcomm for use in smartphones, tablets, laptops, 2-in-1 PCs, smartwatches , and smartbooks devices.
  • 20.3K
  • 19 Oct 2022
Topic Review
CCR Model (DEA)
The first Data Envelopment Analysis (DEA) model developed by Charnes, Cooper and Rhodes (1978) under the assumption of a Constant Returns to Scale production technology, i.e.,  when an increase in the production resources results in a proportional increase in the output.
  • 16.3K
  • 30 May 2021
Topic Review
Hydrogen Storage and Transportation
In the current hydrocarbon economy, transportation is fueled primarily by petroleum. Burning of hydrocarbon fuels emits carbon dioxide and other pollutants. The supply of economically usable hydrocarbon resources in the world is limited, and the demand of hydrocarbon fuels is increasing, particularly in China, India and other countries. Proponents of a world-scale hydrogen economy argue that hydrogen can be environmentally cleaner source of energy to end-users, particularly in transportation applications, without release of pollutants (such as particulate matter) or carbon dioxide at the point of end use. A recent analysis asserted that “most of the hydrogen supply chain pathways would release significantly less carbon dioxide into the atmosphere than would gasoline used in hybrid electric vehicles” and that significant reductions in carbon dioxide emissions would be possible if carbon capture or carbon sequestration methods were utilized at the site od energy or hydrogen production. Hydrogen storage can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. But two difficulties with hydrogen are that hydrogen is just an energy carrier and has a low critical temperature of 35 K, i.e., hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T< 100K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g., Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace. In conclusion, routes for the transmission and storage of hydrogen for chemical processes, and hydrogen-based energy systems are increasing their establishment. Here, these routes are described, considering their attractions and difficulties.
  • 15.6K
  • 18 Jun 2021
Topic Review
BMW 5 Series (E39)
The BMW E39 is the fourth generation of BMW 5 Series, which was sold from 1995 to 2004. It was launched in the sedan body style, with the wagon/estate body style (marketed as "Touring") introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004. The proportion of chassis components using aluminium significantly increased for the E39, and it was the first 5 Series to use aluminium for all major components in the front suspension or any in the rear. It was also the first 5 Series where a four-cylinder diesel engine was available. Rack and pinion steering was used for the first time in a 5 Series (with the exception of the E34 525iX), being fitted to the four-cylinder and six-cylinder models. Unlike its E34 predecessor and E60 successor, the E39 was not available with all-wheel drive. The high performance M5 sedan was introduced in 1998, powered by the 4.9-litre S62 V8 engine. It was the first M5 model to be powered by a V8 engine.
  • 15.6K
  • 05 Dec 2022
Topic Review
Chinese Swords
Historically, all Chinese swords are classified into two types, jian and dao. Jians are double-edged straight swords while daos are single-edged, and mostly curved from the Song dynasty forward. The jian has been translated at times as a long sword, and the dao a saber or a knife. Bronze jians appeared during the Western Zhou period and switched to wrought iron and steel during the late Warring States period. In modern times, the ceremonial commissioned officer's sword of the Chinese navy has been patterned after the traditional jian since 2008. Other than specialized weapons like the Divided Dao, Chinese swords are usually 70–110 cm (28–43 in) in length, although longer swords have been found on occasion. Outside of China, Chinese swords were also used in Japan from the third to the sixth century AD, but were replaced with Korean and native Japanese swords by the middle Heian era.
  • 13.9K
  • 30 Sep 2022
Topic Review
Power Electronic Switches
As the need for green and effective utilization of energy continues to grow, the advancements in the energy and power electronics industry are constantly driven by this need, as both industries are intertwined for obvious reasons. The developments in the power electronics industry has over the years hinged on the progress of the semiconductor device industry. The semiconductor device industry could be said to be on the edge of a turn into a new era, a paradigm shift from the conventional silicon devices to the wide band gap semiconductor technologies. While a lot of work is being done in research and manufacturing sectors, it is important to look back at the past, evaluate the current progress and look at the prospects of the future of this industry. This paper is unique at this time because it seeks to give a good summary of the past, the state-of-the-art, and highlight the opportunities for future improvements. A more or less ‘forgotten’ power electronic switch, the four-quadrant switch, is highlighted as an opportunity waiting to be exploited as this switch presents a potential for achieving an ideal switch.
  • 13.4K
  • 29 Dec 2020
Topic Review
BMW 5 Series (E34)
The BMW E34 is the third generation of the BMW 5 Series, which was produced from 1987 until 1996. Initially launched as a sedan in January 1988, the E34 also saw a "Touring" wagon (estate) bodystyle in September 1992, a first for the 5 Series. BMW replaced the E34 with the E39 5 Series in December 1995, although E34 Touring models remained in production until June 1996. The E34 generation marked the first time all-wheel drive was incorporated into the 5 Series with the 525iX, and the first V8 engine to be used in a 5 Series. The E34 also saw the introduction of stability control (ASC), traction control (ASC+T) a 6-speed manual transmission and adjustable damping (EDC) to the 5 Series range. There was an unusually large range of engines fitted over its lifetime as nine different engine families were used. These consisted of straight-four, straight-six and V8 engines. The E34 M5 is powered by the S38 straight-six engine and was produced in sedan and wagon body styles.
  • 13.3K
  • 31 Oct 2022
Topic Review
Mixer (Cooking)
A mixer is a kitchen device that uses a gear-driven mechanism to rotate a set of "beaters" in a bowl containing the food or liquids to be prepared by mixing them. Mixers help automate the repetitive tasks of stirring, whisking or beating. When the beaters are replaced by a dough hook, a mixer may also be used to knead.
  • 12.1K
  • 07 Nov 2022
Topic Review
Data Envelopment Analysis (DEA)
Data Envelopment Analysis (DEA) is a non-parametric methodology for measuring the efficiency of Decision Making Units (DMUs) using multiple inputs to outputs configurations. This is the most commonly used tool for frontier estimations in assessments of productivity and efficiency applied to all fields of economic activities.
  • 11.4K
  • 28 Jan 2022
Topic Review
Dialysis (Biochemistry)
In biochemistry, dialysis is the process of separating molecules in solution by the difference in their rates of diffusion through a semipermeable membrane, such as dialysis tubing. Dialysis is a common laboratory technique that operates on the same principle as medical dialysis. In the context of life science research, the most common application of dialysis is for the removal of unwanted small molecules such as salts, reducing agents, or dyes from larger macromolecules such as proteins, DNA, or polysaccharides. Dialysis is also commonly used for buffer exchange and drug binding studies. The concept of dialysis was introduced in 1861 by the Scottish chemist Thomas Graham. He used this technique to separate sucrose (small molecule) and gum Arabic solutes (large molecule) in aqueous solution. He called the diffusible solutes crystalloids and those that would not pass the membrane colloids. From this concept dialysis can be defined as a spontaneous separation process of suspended colloidal particles from dissolved ions or molecules of small dimensions through a semi permeable membrane. Most common dialysis membrane are made of cellulose, modified cellulose or synthetic polymer (cellulose acetate or nitrocellulose).
  • 10.6K
  • 07 Nov 2022
Topic Review
Drainpipe Materials through the Centuries
Agricultural drainage plays an important role worldwide in food production and conservation of soil resources, while safeguarding investments in agricultural production and irrigation projects. It can improve crop yields and land productivity, especially on poorly drained soils and in cases of prolonged waterlogging. Both the subsurface drainage materials and the installation techniques used have a long history dating to prehistoric times. Over time, new subsurface drainage materials, installation techniques and modernized equipment developed continuously to take advantage of technological advances provided through research and development, while the planning and organization of the implementation process improved.
  • 9.9K
  • 27 Oct 2020
Topic Review
List of Devices with LTE Advanced
List of devices with LTE Advanced support. LTE is a standard for wireless communication and LTE Advanced (Cat 6 and above) is a high speed version of LTE, sometimes marketed as LTE+, 4G+, 4GX, 4.5G or 4G LTE Ultra. LTE support varies from country to country, and the speed may vary depending on user location and how fast they're travelling. The list below shows the devices that should support LTE Cat 6 and above.
  • 9.4K
  • 22 Nov 2022
Topic Review
History of Wind Power
Wind power has been used as long as humans have put sails into the wind. For more than two millennia wind-powered machines have ground grain and pumped water. Wind power was widely available and not confined to the banks of fast-flowing streams, or later, requiring sources of fuel. Wind-powered pumps drained the polders of the Netherlands, and in arid regions such as the American mid-west or the Australian outback, wind pumps provided water for livestock and steam engines. With the development of electric power, wind power found new applications in lighting buildings remote from centrally-generated power. Throughout the 20th century parallel paths developed small wind plants suitable for farms or residences, and larger utility-scale wind generators that could be connected to electricity grids for remote use of power. Today wind-powered generators operate in every size range between tiny plants for battery charging at isolated residences, up to near-gigawatt sized offshore wind farms that provide electricity to national electrical networks. By 2014, over 240,000 commercial-sized wind turbines were operating in the world, producing 4% of the world's electricity.
  • 9.0K
  • 02 Oct 2022
Topic Review
Shooting-Brake
Shooting-brake is a car body style which originated in the 1890s as a horse-drawn wagon used to transport shooting parties with their equipment and game. The first automotive shooting brakes were manufactured in the early 1900s in the United Kingdom. The vehicle style became popular in England during the 1920s and 1930s, and was produced by vehicle manufacturers or as conversions by coachbuilders. The term was used in Britain interchangeably with estate car from the 1930s but has not been in general use for many years and has been more or less superseded by the latter term. Since the 1960s, the term has evolved, describing cars combining elements of both station wagon and coupé body styles, with or without reference to the historical usage for shooting parties. During the 1960s and early 1970s, several high-end European manufacturers produced two-door shooting brake versions of their sports cars. Following a hiatus from the mid 1970s until the early 2010s, the shooting-brake body style entered a resurgence.
  • 8.7K
  • 04 Nov 2022
Topic Review
Ballistic Missile
A ballistic missile follows a ballistic trajectory to deliver one or more warheads on a predetermined target. These weapons are only guided during relatively brief periods of flight—most of their trajectory is unpowered, being governed by gravity and air resistance if in the atmosphere. Shorter range ballistic missiles stay within the Earth's atmosphere, while longer-ranged intercontinental ballistic missiles (ICBMs), are launched on a sub-orbital flight trajectory and spend most of their flight out of the atmosphere. These weapons are in a distinct category from cruise missiles, which are aerodynamically guided in powered flight.
  • 8.4K
  • 05 Nov 2022
Topic Review
Armor-Piercing Shell
An armor-piercing shell, armour-piercing shell in Commonwealth English, AP for short, is a type of ammunition designed to penetrate armor. From the 1860s to 1950s, a major application of armor-piercing projectiles was to defeat the thick armor carried on many warships and cause damage to the lightly-armored interior. From the 1920s onwards, armor-piercing weapons were required for anti-tank missions. AP rounds smaller than 20 mm are typically known as "armor-piercing ammunition", and are intended for lightly-armored targets such as body armor, bulletproof glass and light armored vehicles. The AP shell is now seldom used in naval warfare, as modern warships have little or no armor protection. In the anti-tank role, as tank armor improved during World War II newer designs began to use a smaller but dense penetrating body within a larger shell. These lightweight shells were fired at very high muzzle velocity and retained that speed and the associated penetrating power over longer distances. An armor-piercing shell must withstand the shock of punching through armor plating. Shells designed for this purpose have a greatly strengthened body with a specially hardened and shaped nose. One common addition to later shells is the use of a softer ring or cap of metal on the nose known as a penetrating cap. This lowers the initial shock of impact to prevent the rigid shell from shattering, as well as aiding the contact between the target armor and the nose of the penetrator to prevent the shell from bouncing off in glancing shots. Ideally, these caps have a blunt profile, which led to the use of a further thin aerodynamic cap to improve long-range ballistics. AP shells may contain a small explosive charge known as a "bursting charge". Some smaller-caliber AP shells have an inert filling or an incendiary charge in place of the bursting charge. Designs using newer technologies no longer look like the classic artillery shell and have displaced it. Instead the penetrator is a long rod of dense material like tungsten or depleted uranium (DU) that further improves the terminal ballistics. Whether these modern designs are considered to be AP rounds depends on the definition. Accordingly reference sources vary in whether they include or exclude them.
  • 8.4K
  • 02 Nov 2022
Topic Review
Antenna Gain
In electromagnetics, an antenna's power gain or simply gain is a key performance number which combines the antenna's directivity and electrical efficiency. In a transmitting antenna, the gain describes how well the antenna converts input power into radio waves headed in a specified direction. In a receiving antenna, the gain describes how well the antenna converts radio waves arriving from a specified direction into electrical power. When no direction is specified, gain is understood to refer to the peak value of the gain, the gain in the direction of the antenna's main lobe. A plot of the gain as a function of direction is called the gain pattern or radiation pattern. Antenna gain is usually defined as the ratio of the power produced by the antenna from a far-field source on the antenna's beam axis to the power produced by a hypothetical lossless isotropic antenna, which is equally sensitive to signals from all directions. Usually this ratio is expressed in decibels, and these units are referred to as decibels-isotropic (dBi). An alternative definition compares the received power to the power received by a lossless half-wave dipole antenna, in which case the units are written as dBd. Since a lossless dipole antenna has a gain of 2.15 dBi, the relation between these units is [math]\displaystyle{ \mathrm{Gain(dBd)} = \mathrm{Gain(dBi)} - 2.15 }[/math]. For a given frequency, the antenna's effective area is proportional to the power gain. An antenna's effective length is proportional to the square root of the antenna's gain for a particular frequency and radiation resistance. Due to reciprocity, the gain of any reciprocal antenna when receiving is equal to its gain when transmitting. Directive gain or directivity is a different measure which does not take an antenna's electrical efficiency into account. This term is sometimes more relevant in the case of a receiving antenna where one is concerned mainly with the ability of an antenna to receive signals from one direction while rejecting interfering signals coming from a different direction.
  • 8.0K
  • 10 Oct 2022
Topic Review
M2 Browning
The M2 Machine Gun or Browning .50 Caliber Machine Gun is a heavy machine gun designed toward the end of World War I by John Browning. Its design is similar to Browning's earlier M1919 Browning machine gun, which was chambered for the .30-06 cartridge. The M2 uses the much larger and much more powerful .50 BMG cartridge, which was developed alongside and takes its name from the gun itself (BMG standing for Browning Machine Gun). It has been referred to as "Ma Deuce", in reference to its M2 nomenclature. The design has had many specific designations; the official designation for the current infantry type is Browning Machine Gun, Cal. .50, M2, HB, Flexible. It is effective against infantry, unarmored or lightly armored vehicles and boats, light fortifications and low-flying aircraft. The Browning .50 caliber machine gun has been used extensively as a vehicle weapon and for aircraft armament by the United States from the 1930s to the present. It was heavily used during World War II, the Korean War, the Vietnam War, the Falklands War, the Soviet–Afghan War, the Gulf War, the Iraq War and the War in Afghanistan in the 2000s and 2010s. It is the primary heavy machine gun of NATO countries, and has been used by many other countries as well. The M2 has been in use longer than any other firearm in U.S. inventory except the .45 ACP M1911 pistol, also designed by John Browning. The current M2HB is manufactured in the U.S. by General Dynamics and U.S. Ordnance for use by the U.S. government, and for allies via Foreign Military Sales, as well as foreign manufacturers such as FN Herstal.
  • 7.8K
  • 05 Dec 2022
  • Page
  • of
  • 50
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback