Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 + 1630 word(s) 1630 2021-10-15 08:39:51 |
2 added references, checked the text, added tables + 343 word(s) 1973 2021-10-28 17:21:37 | |
3 corrected tables + 343 word(s) 1973 2021-10-28 18:04:52 | |
4 table title corrected + 343 word(s) 1973 2021-10-28 18:06:35 | |
5 update Title Meta information modification 1973 2021-10-29 05:40:59 |

Video Upload Options

Do you have a full video?

Confirm

Are you sure to Delete?
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Wlazło, �.; Ossowski, M. Natural Sorbents in Fattening Pigs' Diet. Encyclopedia. Available online: https://encyclopedia.pub/entry/15509 (accessed on 20 April 2024).
Wlazło �, Ossowski M. Natural Sorbents in Fattening Pigs' Diet. Encyclopedia. Available at: https://encyclopedia.pub/entry/15509. Accessed April 20, 2024.
Wlazło, Łukasz, Mateusz Ossowski. "Natural Sorbents in Fattening Pigs' Diet" Encyclopedia, https://encyclopedia.pub/entry/15509 (accessed April 20, 2024).
Wlazło, �., & Ossowski, M. (2021, October 28). Natural Sorbents in Fattening Pigs' Diet. In Encyclopedia. https://encyclopedia.pub/entry/15509
Wlazło, Łukasz and Mateusz Ossowski. "Natural Sorbents in Fattening Pigs' Diet." Encyclopedia. Web. 28 October, 2021.
Natural Sorbents in Fattening Pigs' Diet
Edit

The effect of three natural sorbents added to the diet of pigs on the composition and physicochemical properties of two skeletal muscles—the musculus Longissimus lumborum (MLL) and musculus semimembranosus (MSM) of crossbred pigs were evaluated. 

natural sorbent pig meat quality

1. Introduction

According to data from the United States Department of Agriculture (USDA), the world leaders in pig farming and pork production are China and the European Union (EU), [1]. To ensure high product quality, the meat industry and livestock farmers must implement systems guaranteeing the quality and repeatability of the raw meat used in production [2][3][4]. Pig farmers focus primarily on optimal feeding, which is the most important factor determining the economic profitability of production. The quality and safety of feed play an important role in animal production because they determine the magnitude of losses incurred and the health safety of the food product. This necessitates the search for and implementation of methods to improve animal health and productivity. One means of meeting these requirements is feed supplementation with clay minerals, i.e., natural adsorbents, such as zeolite or montmorillonite, which have the capacity to bind and/or adsorb mycotoxins [3][5][6].
The production of animals for meat generates emissions of gaseous pollutants, including greenhouse gases. Livestock farmers are required to implement clean safe techniques (best available techniques—BAT) that reduce pressure on the environment. It is estimated that about 80% of emissions of ammonia (NH3) from European agriculture are from animal waste on farms. There is enormous variation between individual countries in the level of NH3 emissions from various sectors of production [7]. The EU climate policy is aimed at reducing the impact of farms on the environment. Many authors suggest the need for measures aimed at maintaining a balance between farms and the state of the natural environment. For this purpose, farmers use natural sorbents added to feed and litter that both increase feed safety and reduce the impact of the farms on the environment. Among sorbents of natural origin, the most common are silicates: sodium bentonite, zeolite, halloysite, perlite, or vermiculite. They have a high sorption capacity and are not harmful to animals. Their presence in feces contributes to the reduction in gaseous emissions [8][9][10][11][12][13][14]. Mineral sorbents (zeolites and bentonites) are used in pig farming mainly as feed additives for animals in various age groups: zeolites in the amount of 0.5% to 8% [15] and from 0.5% to 2% in the case of bentonites [16].
In terms of technological quality, the most important characteristics of pork include its chemical composition (including the proportion of intramuscular fat), pH, color, and water-holding capacity (WHC). Instrumental measurement of physicochemical properties makes it possible to identify the direction of changes taking place in meat after slaughter, to diagnose quality defects—most commonly pale soft exudative (PSE) and acid meat and determine an appropriate type of processing [17].

2. Effect of Natural Sorbents in the Diet of Fattening Pigs on Meat Quality and Suitability for Processing

Mineral sorbents (zeolites and bentonites) are used in pig farming mainly as feed additives for animals in various age groups: zeolites in the amount of 0.5% to 8% [18] and bentonites from 0.5% to 2% [19]. The use of sorbents (including zeolite and montmorillonite) in the diet of fattening pigs has been confirmed to have beneficial effects, improving daily weight gains, utilization of feed, and the feed conversion ratio in Duroc × Landrace × Yorkshire crossbreds [20][21]. Synthetic zeolite in the amount of 0.5% in the diet of fattening pigs (Landrace × Yorkshire × Duroc) did not affect weight gain or carcass quality [22]. In the present study as well, the addition of various sorbents in the two experiments did not significantly influence the carcass value parameters of the pigs. The positive effects on production parameters in animals, therefore, depend on the type of sorbent used (natural or synthetic), [23], its purity, and above all its structure and physicochemical properties, and the level of supplementation in the diet [24]. There are few papers, however, presenting research on the effect of sorbents on the physicochemical properties of pork.
The average chemical composition of the two skeletal muscles of the pigs from experiments 1 and 2 was similar to the values reported for the Polish population of pigs in commodity production [25][26]. Islam et al. [22] found that the addition of 0.5% zeolite to feed for crossbred pigs (Landrace × Yorkshire × Duroc) had no significant effect on the proximate chemical composition of the longissimus muscle (the loin). In comparison with the present study (MLL, Table 1), the authors report lower content of moisture (70.23%) and ash (1.16%), but higher content of protein (26.06%) and fat (2.55%).

Table 1. Physicochemical properties of the musculus longissimus lumborum (MLL) and musculus semimembranosus (MSM), (mean ± SD).

December

MLL

MSM

C2

(n = 6)

Sorbent A

(n = 6)

Sorbent B

(n = 6)

K2/C2

(n = 6)

Sorbent A

(n = 6)

Sorbent B

(n = 6)

pH1

6.65 ± 0.05

6.47 ± 0.48

6.48 ± 0.05

6.58 ± 0.06

6.71 ± 0.36

6.47 ± 0.12

pH24

5.79 ± 0.01

5.69 ± 0.21

5.54 ± 0.05

6.02 c ± 0.06

5.70 b ± 0.26

5.55 a ± 0.03

pH48

5.64 ± 0.04

5.44 ± 0.03

5.46 ± 0.02

5.79 B ± 0.04

5.48 A ± 0.04

5.49 A ± 0.02

aW

0.947 ± 0.002

0.953 ± 0.006

0.953 ± 0.005

0.949 ± 0.002

0.957 ± 0.007

0.953 ± 0.003

L*

50.58 a ± 1.15

54.05 b ± 2.37

53.79 b ± 1.36

44.56 a ± 0.75

50.44 c ± 3.79

48.63 b ± 2.53

a*

17.51 ± 0.93

18.17 ± 0.93

18.03 ± 0.83

20.56 ± 0.84

19.75 ± 0.86

20.38 ± 0.98

b*

4.21 ± 1.28

5.60 ± 1.84

5.51 ± 1.28

4.09 ± 1.06

5.98 ± 1.57

5.80 ± 1.28

Pigments (µg/g)

53.70 C ± 1.76

41.80 A ± 1.26

46.70 B ± 3.95

64.30 B ± 3.42

43.70 A ± 3.82

44.90 A ± 0.94

TBARS

(mg MDA/kg)

0.314 b ± 0.018

0.238 a ± 0.019

0.280 ab ± 0.013

0.444 C ± 0.036

0.280 A ± 0.012

0.375 B ± 0.012

W-B SF (N)

47.60 ± 8.80

55.10 ± 21.40

48.30 ± 9.20

65.50 ± 8.70

71.50 ± 21.10

72.60 ± 20.60

W-B SE (mJ)

164.00 ± 28.50

182.00 ± 81.10

155.70 ± 41.80

289.30 ± 41.10

286.20 ± 103.50

285.90 ± 95.30

Hardness (N)

88.90 ± 14.85

96.40 ± 12.86

75.22 ± 12.24

89.15 ± 12.37

89.05 ± 16.15

90.95 ± 33.60

Springiness

0.59 ± 0.05

0.59 ± 0.03

0.60 ± 0.02

0.58 ± 0.03

0.58 ± 0.04

0.56 ± 0.03

Gumminess

34.17 ± 5.83

36.98 ± 2.70

28.90 ± 5.37

37.12 ± 2.64

34.86 ± 5.72

37.21 ± 8.16

Chewiness

20.09 ± 3.32

21.75 ± 0.99

17.38 ± 3.09

21.37 ± 0.52

19.97 ± 2.39

21.11 ± 8.09

DL (%)

3.37 b ± 0.58

2.25 a ± 0.13

2.78 ab ± 0.12

3.78 ± 0.92

3.67 ± 0.44

3.52 ± 0.11

CL (%)

27.04 ± 1.05

29.26 ± 1.61

27.06 ± 1.73

25.67 ± 1.08

26.84 ± 1.32

26.83 ± 2.20

M/T×100

37.34 ± 1.12

38.15 ± 6.59

36.95 ± 2.06

40.58 ± 4.51

45.08 ± 5.62

36.45 ± 4.34

G-H (mg)

50.45 ± 1.59

56.53 ± 4.27

55.91 ± 1.07

57.57 ± 2.52

54.89 ± 9.11

60.82 ± 5.98

Moisture (%)

75.25 ± 0.13

73.68 ± 0.53

74.42 ± 0.10

75.17 ± 0.20

73.41 ± 0.78

74.25 ± 0.19

Protein (%)

21.48 ± 0.57

21.76 ± 1.19

22.22 ± 0.72

21.17 ± 1.46

22.09 ± 1.43

22.12 ± 0.99

Fat (%)

1.08 ± 0.16

1.47 ± 0.42

1.30 ± 0.22

1.81 ± 0.04

2.24 ± 0.32

2.00 ± 0.58

Ash (%)

1.21 ± 0.04

1.25 ± 0.03

1.24 ± 0.03

1.24 ± 0.04

1.17 ± 0.10

1.24 ± 0.08

M:P

3.50 ± 0.09

3.39 ± 0.17

3.35 ± 0.11

3.56 ± 0.26

3.34 ± 0.29

3.36 ± 0.15

Energy (kcal)

95.60 ± 2.78

100.30 ± 3.42

100.60 ± 4.14

101.00 ± 6.21

108.50 ± 3.11

106.50 ± 8.06

MLL—m. longissimus lumborum; MSM—m. semimembranosus; SD—standard deviation; Groups: C2—control; A and B—groups receiving feed with 1.5% of mixtures (in different proportions) of bentonite–montmorillonite and zeolite–clinoptilolite defined in the patent application; a,b —Values in rows marked with different letters differ significantly at p ≤ 0.05; A,B—Values in rows marked with different letters differ significantly at p ≤ 0.01; M:P—moisture to protein ratio; CIE color parameters: L*—lightness; a*—red; b*—yellow; TBARS—thiobarbituric acid reactive substance; MDA—malondialdehyde; aW—water activity; W–B SF—Warner–Bratzler shear force; W–B SE—Warner–Bratzler shear energy; DL—drip loss; CL—cooking loss; M/T—meat sample/total loss × 100; G–H—free water by the Grau–Hamm method [[27]].

By measuring the pH of muscle tissue, it is possible to diagnose potential quality defects in pork. An appropriate pH resulting from post-mortem glycogenolysis ensures favorable sensory and technological properties, including an attractive color, tenderness, palatability, and WHC [28]. Case-ready pork should have a final pH (24 and 48 h post-mortem) ranging from 5.50 to 5.80 [25]. In characterizing the parameters of the technological quality of the meat, it should be stressed that the low initial pH of the muscle tissue of the pigs in experiment 1, in both the control and experimental groups (MLL 5.92–6.01 and MSM 6.03–6.09), was associated with unfavorable atmospheric conditions (high ambient temperature) during transport of the experimental animals to the slaughterhouse (in June) and was not genetically determined. At 24 and 48 post-mortem, the pH of the MLL was about 5.45 and that of the pH was ≥5.5. It should be emphasized, however, that in no case was the final pH of the meat below 5.4, the typical level for acid meat [25]. Nevertheless, based on the values at 24 h post-mortem for pH (<5.5), L* (>50), and DL (>5.0%), [29], the MLL can be considered to show symptoms of the PSE defect, irrespective of the feeding group [30]. Moreover, the greater L* of the MLL may also have been influenced by the degradation of muscle proteins, which depends directly on low final pH, causing increased light dispersion [31]. These unfavorable changes were not observed in the MSM, most likely due to differences in the composition of muscle fibers in the two muscles [32]. The values of the parameters tested in the skeletal muscles of the pigs in all groups in experiment 2 (Table 1) also do not indicate any quality defects in the meat.
Kim et al. [20] reported increasing pH values (5.62, 5.65, and 5.82; p < 0.05) for the loin muscle of Landrace × Yorkshire × Duroc fattening pigs with increasing shares of zeolite in their feed (1%, 2% and 4%, respectively), while the pH in the control group was 5.58. In the case of instrumental color parameters, the authors obtained significantly lower L* values (48.81, 47.67, and 47.38) in pigs receiving a higher zeolite supplement (1%, 2%, and 4%, respectively) than in the control group (51.31), i.e., the surface of the meat became darker. This is in contrast to the results of the present study. The values for the other color parameters (redness and yellowness) were not significantly different, although a downward trend was observed—from 9.21 to 7.25 for a* and from 6.12 to 5.33 for b*. For these parameters, the values in the experimental groups (A and B) were higher than in the control group (C2).
Among the other physicochemical properties, the WHC of the MLL was more favorable in the experimental pigs in experiment 2 (Table 2), whose muscles had lower DL. Despite the differences observed, the TBARS value was relatively low, as aroma defects in pork are detectable within a range from 0.5 to 1.0 mg MDA/kg of meat [33]. The higher oxidative stability (lower TBARS) noted in both muscles of the pigs fed with either the addition of biochar (experiment 1) or sorbents A and B (experiment 2) may have been linked to the lower concentration of haem proteins, containing Fe and exhibiting pro-oxidant activity [34]. Shurson et al. [24] observed a linear decrease in iron retention (p < 0.05) in pigs fed with increasing amounts of zeolite A (0%, 1%, 2%, and 3%). The authors explain that zeolite A can partially impair the absorption of amino acids, and these in turn form ligands with iron, which are chelating factors in the transport of Fe through the cells of the mucosa for absorption. In this way, Fe absorption is impaired as well, and thus its retention in the body is reduced. This effect was not observed in the case of administration of clinoptilolite in the amount of 2.5%, 5%, and 7.5%.

Table 2. Nutrient content in 1 kg grower feed 40-70 kg and finisher feed >70 kg body weight (BW); experiments 1 and 2.

Nutrient

Content

Requirement

% Met

Grower

Finisher

Grower

Finisher

Grower

Finisher

Dry matter, g

762

765

Metabolizable energy, MJ

13.2

13.0

13.2

13.0

100

100

Lysine, g

10.3

9.48

10.1

9.00

103

105

Methionine, g

2.80

2.67

3.02

2.70

93

99

Methionine + cystine, g

5.92

5.74

6.03

5.40

98

106

Tryptophan, g

1.97

1.86

1.91

1.70

103

109

Threonine, g

6.49

6.04

6.53

5.85

99

103

Crude protein, g

168

157

168

155

100

101

Calcium, g

8.10

8.32

8.12

8.00

100

104

Total phosphorus, g

5.81

5.79

4.87

4.50

119

129

Digestible phosphorus, g

1.47

1.45

2.64

2.00

56

72

Sodium, g

1.79

1.78

1.73

1.70

104

105

Fiber, g

43.8

46.8

43.1

43.0

102

109

Magnesium, g

1.68

1.40

64.0

65.0

3

2

Manganese, mg

98.6

98.1

40.0

40.0

246

245

Iodine, mg

2.46

2.44

0.200

0.200

1232

1 220

Copper, mg

23.5

23.3

17.5

17.5

134

133

Iron, mg

172

169

80.0

80.0

215

211

Zinc, mg

101

101

100

100

101

101

Selenium, mg

0.520

0.505

0.100

0.100

520

505

Vitamin A, IU

6 500

6 500

6 500

6 500

100

100

Vitamin D3, IU

2 000

2 000

1 250

1 250

160

160

Vitamin E, mg

90.1

91.2

80.0

80.0

113

114

Vitamin K3, mg

2.33

2.33

1.25

1.25

186

186

Vitamin B1, mg

6.34

6.37

1.00

1.00

634

637

Vitamin B2, mg

7.73

7.51

4.00

4.00

193

188

Vitamin B6, mg

8.40

8.14

2.25

2.25

373

362

Vitamin B12, mcg

0.391

0.031

20.0

20.0

2

Biotin, mg

0.232

0.231

Folic acid, mg

1.43

1.47

0.75

0.75

190

196

Nicotinic acid, mg

77.4

76.7

25.0

25.0

310

307

Pantothenic acid, mg

24.1

23.6

14.0

14.0

172

168

Choline, mg

1 466

1 355

150

150

977

903

Linoleic acid, mg

2 663

3 260

Sugar, g

33.9

33.3

The tenderness of the meat (from both skeletal muscles), expressed as shear force in the W–B test, was significantly varied in experiment 1; for the MLL it ranged from 27.42 to 37.93 N and for the MSM from 37.33 to 57.47 N. In experiment 2, the shear force did not differ significantly between the experimental groups in the skeletal muscles, ranging from 47.62 to 55.13 N for MLL and from 65.50 to 77.64 N for MSM. Iwańska et al. [35], taking into account different tenderization processes, proposed the following classification for pork tenderness in terms of W-B shear force (in N/cm2): very tender <30, tender 30–45 N, tough 60–90 N, and very tough >90 N. Adopting this classification, the meat in the present study can be classified as tender for both skeletal muscles in experiment 1, while in experiment 2 the MLL was classified as intermediate and the MSM as tough. It should be noted that this level had been reached by 48 h post-mortem and did not include the aging process.

3. Conclusions

It can be concluded from the results of the study that the use of natural sorbents as feed additives for pigs has no negative effects on the physicochemical properties of the muscle tissue or its potential suitability for use as case-ready meat or the production of processed meat products. The results indicate that the sorbents used are a safe ingredient in the diet of pigs, as indicated by meat parameters such as optimum pH and water activity and high oxidative stability (TBARS). At the same time, there is a need to continue this line of research, taking into account the meat aging process, packaging, storage time at various temperatures, the quality of processed meat products, and the relationships linking the future production goals of pig farming and processing potential in the meat industry with current climate policy.

References

  1. United States Department of Agriculture, Foreign Agricultural Service. United States Agricultural Export Yearbook; USDA Foreign Agricultural Service: Washington, DC, USA, 2019.
  2. Bonneau, M.; Lebret, B. Production systems and influence on eating quality of pork. Meat Sci. 2010, 84, 293–300.
  3. Channon, H.A.; D’Souza, D.N.; Jarrett, R.G.; Lee, G.S.H.; Watling, R.J.; Jolley, J.Y.C.; Dunshea, F.R. Guaranteeing the quality and integrity of pork—an Australian case study. Meat Sci. 2018, 144, 186–192.
  4. Wever, M.; Wognum, N.; Trienekens, J.; Omta, O. Alignment between chain quality management and chain governance in EU pork supply chains: A Transaction-Cost-Economics perspective. Meat Sci. 2010, 84, 228–237.
  5. Elliott, C.T.; Connolly, L.; Kolawole, O. Potential adverse effects on animal health and performance caused by the addition of mineral adsorbents to feeds to reduce mycotoxin exposure. Mycotoxin Res. 2020, 36, 115–126.
  6. Guerre, P. Worldwide mycotoxins exposure in pig and poultry feed formulations. Toxins 2016, 8, 350.
  7. Eurostat. International Trade in Goods. Available online: https://ec.europa.eu/eurostat/web/international-trade-in-goods/data/database (accessed on 22 May 2021).
  8. Cao, L.; Li, Z.; Xiang, S.; Huang, Z.; Ruan, R.; Liu, Y. Preparation and characteristics of bentonite-zeolite adsorbent and its application in swine wastewater. Bioresour. Technol. 2019, 284, 448–455.
  9. Doroszewski, P.; Grabowicz, M.; Kaszkowiak, J.; Borowski, S. Safe climate and emission of greenhouse gases from livestock. Logistyka 2015, 5, 765–773.
  10. Li, H.; Zhang, T.; Tsang, D.C.W.; Li, G. Effects of external additives: Biochar, bentonite, phosphate, on co-composting for swine manure and corn straw. Chemosphere 2020, 248, 125927.
  11. Pratt, C.; Redding, M.; Hill, J.; Brown, G.; Westermann, M. Clays can decrease gaseous nutrient losses from soil-applied livestock manures. J. Environ. Qual. 2016, 45, 638–645.
  12. Thieu, N.Q.; Ogle, B.; Pettersson, H. Efficacy of bentonite clay in ameliorating aflatoxicosis in piglets fed aflatoxin contaminated diets. Trop. Anim. Health Prod. 2008, 40, 649–656.
  13. Wang, Q.; Awasthi, M.K.; Ren, X.; Zhao, J.; Li, R.; Wang, Z.; Wang, M.; Chen, H.; Zhang, Z. Combining biochar, zeolite and wood vinegar for composting of pig manure: The effect on greenhouse gas emission and nitrogen conservation. Waste Manag. 2018, 74, 221–230.
  14. Wlazło, Ł.; Nowakowicz-Dębek, B.; Kapica, J.; Kwiecień, M.; Pawlak, H. Removal of ammonia from poultry manure by aluminosilicates. J. Environ. Manag. 2016, 183, 722–725.
  15. Schneider, A.F.; Zimmermann, O.F.; Gewehr, C.E. Zeolites in poultry and swine production. Ciência Rural 2017, 47, 1–8.
  16. EFSA FEEDAP Panel (EFSA Panel on Additives and Products or Substances used in Animal Feed). Scientific Opinion on the safety and efficacy of bentonite (dioctahedral montmorillonite) as feed additive for all species. EFSA J. 2011, 9, 2007.
  17. Aaslyng, M.D.; Hviid, M. Meat quality in the Danish pig population anno 2018. Meat Sci. 2020, 163, 108034.
  18. PN-ISO 1444:2000. Meat and Meat Products—Determination of Free Fat Content; The Polish Committee for Standardization: Warsaw, Poland, 2000.
  19. Regulation (EU) No 1169/2011 of the European Parliament and of the Council of 25 October 2011 on the Provision of Food Information to Consumers. Annex XIII Off. J. Eur. Union L 2011, 304, 18–63.
  20. Kim, J.H.; Kim, S.C.; Ko, Y.D. Effect of dietary zeolite treated on the performance and carcass characteristics in finishing pigs. J. J. Anim. Sci. Technol. 2005, 47, 555–564.
  21. Yu, D.Y.; Li, X.L.; Li, W.F. Effect of montmorillonite superfine composite on growth performance and tissue lead level in pigs. Biol. Trace Elem. Res. 2008, 125, 229–235.
  22. Islam, M.; Tabasum, A.S.; Seong-Gyun, K.; Hong-Seok, M.; Chul-Ju, Y. Dietary effect of artificial zeolite on performance, immunity, faecal microflora concentration and noxious gas emissions in pigs. Ital. J. Anim. Sci. 2014, 13, 830–835.
  23. Shi, Y.H.; Xu, Z.R.; Wang, C.Z.; Sun, Y. Efficacy of two different types of montmorillonite to reduce the toxicity of aflatoxin in pigs. N. Z. J. Agric. Res. 2007, 50, 473–478.
  24. Shurson, G.C.; Ku, P.K.; Miller, E.R.; Yokoyama, M.T. Effects of zeolite a or clinoptilolite in diets of growing swine. J. Anim. Sci. 1984, 59, 1536–1545.
  25. Sieczkowska, H.; Koćwin-Podsiadła, M.; Antosik, K.; Krzęcio, E.; Zybert, A.; Korszeń, Ł. Quality of pig carcasses and meat of selected breed groups of fatteners. Roczniki Naukowe PTZ 2010, 6, 363–374.
  26. Wojtysiak, D.; Połtowicz, K. Carcass quality, physico-chemical parameters, muscle fibre traits and myosin heavy chain composition of m. Longissimus lumborum from Puławska and Polish Large White pigs. Meat Sci. 2014, 97, 395–403.
  27. Grau, R.; Hamm, R.; Eine einfache Methode zur Bestimmung der Wasserbindung im Muskel. Naturwissenschaften 1953, 40, 29. (In German).
  28. Huff-Lonergan, E.; Baas, T.J.; Malek, M.; Dekkers, J.C.M.; Prusa, K.; Rothschild, M.F. Correlations among selected pork quality traits. J. Anim. Sci. 2002, 80, 617–662.
  29. Warner, R.D.; Kauffman, R.G.; Greaser, M.L. Muscle protein changes post mortem in relation to pork quality traits. Meat Sci. 1997, 45, 339–352.
  30. Florek, M.; Litwińczuk, A.; Skałecki, P.; Topyła, B. Influence of pH1 of fattenerns’ musculus Longissimus lumborum on the changes of its quality. Polish J. Food Nutr. Sci. 2004, 13, 53–56.
  31. Beriain, M.J.; Goñi, M.V.; Indurain, G.; Sarriés, M.V.; Insausti, K. Predicting Longissimus dorsi myoglobin oxidation in aged beef based on early post-mortem colour measurements on the carcass as a colour stability index. Meat Sci. 2009, 81, 439–445.
  32. Wojtysiak, D.; Połtowicz, K. Effect of ageing time on microstructure, rate of desmin degradation and meat quality of pig Longissimus lumborum and adductor muscles. Folia Biol. 2015, 63, 151–158.
  33. Tarladgis, B.G.; Watts, B.M.; Younathan, M.T.; Dugan, L. A distillation method for the quantitative determination of malonaldehyde in rancid foods. J. Am. Oil Chem. Soc. 1960, 37, 44–48.
  34. Min, B.; Nam, K.C.; Cordray, J.; Ahn, D.U. Endogenous factors affecting oxidative stability of beef loin, pork loin, and chicken breast and thigh meats. J. Food Sci. 2008, 73, C439–C446.
  35. Iwańska, E.; Mikołajczak, B.; Grześ, B.; Pospiech, E. Impact of post mortem aging of pork on changes in the isoelectric point of the proteins and tenderness. Med. Weter. 2016, 72, 458–462.
More
Information
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register : ,
View Times: 434
Revisions: 5 times (View History)
Update Date: 29 Oct 2021
1000/1000