Topic Review
Solar Energy in Argentina
A large gap exists between Argentina’s potential for solar energy utilization and the current solar energy deployment, despite advantages such as a high solar and land resources. This gap is, however, not static: different legal frameworks and governmental promotion programs have led to the deployment of large-scale and distributed off-grid photovoltaic installations, but they are at a volume (in terms of installed capacity) that lags years behind other countries with which Argentina shares relevant characteristics. For example, renewable energies Law 27424 and its implementations through the RenovAR promotion programs for RE led to a promising initial PV deployment, which nevertheless stagnated.
  • 1.9K
  • 15 Apr 2022
Topic Review
Ghauri (Missile)
The Ghauri–I (Urdu: غوری-ا‎; official codename: Hatf–5 Ghauri–I) is a land-based surface-to-surface medium-range ballistic missile, in current service with the Pakistan Army's Strategic Forces Command— a subordinate command of Strategic Plans Division. Influenced from the design of Nodong-1 of North Korea, its extensive modification and engineering took place in Kahuta Research Laboratories (KRL) in 1990s with an objective of developing an electronic system that uses a single stage liquid fuel rocket motor to carry a payload of 700 kg to a range of 1,500 km. This is enough to reach most, if not all of India. Two variants of the Ghauri were produced under the secretive missile research programme started in 1987 and the development of a third variant was cancelled. The Ghauri-II uses increased motor assembly length and improved propellants for an increased range of 2,300 km (1,400 mi). The missile is named after Shahabuddin Muhammad Ghauri, while the "Hatf" designation originates from the name of the sword or lance of the Islamic prophet Muhammad.
  • 1.9K
  • 09 Nov 2022
Topic Review
Radioactive Waste Containing Graphite Management
Since the beginning of the nuclear industry, graphite has been widely used as a moderator and reflector of neutrons in nuclear power reactors. Some reactors are relatively old and have already been shut down. As a result, a large amount of irradiated graphite has been generated. Although several thousand papers in the International Nuclear Information Service (INIS) database have discussed the management of radioactive waste containing graphite, knowledge of this problem is not common.
  • 1.9K
  • 17 Sep 2020
Topic Review
Energy Resources in Algeria
Algeria is a wealthy country with natural resources, namely, nuclear, renewable, and non-renewable sources. The non-renewable energy sources are considered the lion’s share for energy production (98%). Algeria’s efforts to ensure and strengthen its energy security will take an important step in the coming decades by commissioning new energy infrastructure based on intensive use of water, coal, nuclear, non-renewable, and renewable sources.
  • 1.9K
  • 06 Jul 2022
Topic Review
Mechanical Methods of Oil Extraction from Peanuts
Peanuts, being crucial crops of global importance, have gained widespread recognition for their versatility and nutritional value. In addition to direct consumption, either with or without treatment, peanuts can be the subject of diverse applications focusing mainly on two distinct objectives: oil extraction and defatting processes. Mechanical techniques for oil extraction from peanuts are grouped into three main sections: extrusion and screw pressing, cold pressing, and hydraulic pressing. 
  • 1.8K
  • 11 Sep 2023
Topic Review
Properties and Characteristics of C6F12O
In order to cope with the problem that no gas fire suppressant can be used in the future, perfluoro-2-methyl-3-pentanone (C6F12O), also known as FK-5112, Novec 1230 or Novec 649, with its environmentally friendly performance, zero ODP, GWP of approximately one and atmospheric lifetime of up to two weeks (as shown in Table 1), has been considered as the next generation of halon alternatives. C6F12O belongs to fluorinated ketones which is different to HFCs. Its nontoxicity, noncombustibility, excellent insulation properties and fire suppression efficiency have attracted worldwide attention. The thermophysical parameters, safety and environmental issues and other properties such as the dispersion characteristics of C6F12O are important indexes to evaluate whether it is appropriate to replace the halon. Meanwhile, these properties and parameters are critical to determine the application scenes of fire suppressant, the selection of fire extinguishment facilities and the engineering calculation of the fire extinguishment system.
  • 1.8K
  • 18 Apr 2022
Topic Review
Aluminum-Fuel-Based Energy Conversion Systems
Metallic aluminum is widely used in propellants, energy-containing materials, and batteries due to its high energy density. In addition to burning in the air, aluminum can react with water to generate hydrogen. Aluminum is carbon-free and the solid-phase products can be recycled easily after the reaction. Micron aluminum powder is stable in the air and enables global trade. Aluminum metal is considered to be a viable recyclable carrier for clean energy.
  • 1.8K
  • 05 Jan 2023
Topic Review
Conductive Fibers
As one of the most impressive materials for wearable sensors, conductive fibers can be made from a variety of raw sources via diverse preparation strategies.
  • 1.8K
  • 28 Apr 2022
Topic Review
Heterogeneous Networks
Communication technologies have drastically increased the number of wireless networks. Heterogeneous networks have now become an indispensable fact while designing the new networks and the way the data packet moves from device to device opens new challenges for transmitting the packet speedily, with maximum throughput and by consuming only confined energy. 
  • 1.8K
  • 23 Sep 2022
Topic Review
Mechanical Properties and Microstructure of Ti6Al4V by LPBF
Ti6Al4V alloy is an ideal lightweight structural metal for a huge variety of engineering applications due to its distinguishing combination of high specific mechanical properties, excellent corrosion resistance and biocompatibility. Laser Powder Bed Fusion (LPBF) provides very different mechanical properties from that of casting or wrought Ti6Al4V. The inherent specificities of the LPBF process, as the layer-by-layer building strategy; the powder feedstock; the melting phenomena and thermal gradients, define the mechanical properties, once they will dictate the microstructural features (e.g. grain size, crystal growth direction, residual porosity and defects, among other). 
  • 1.8K
  • 16 Jun 2022
  • Page
  • of
  • 678
Video Production Service