Topic Review
9M133 Kornet
The 9M133 Kornet (Russian: Корнет; "Cornet", NATO reporting name AT-14 Spriggan, export designation Kornet-E) is a modern Russian man-portable anti-tank guided missile (ATGM) intended for use against main battle tanks. It was first introduced into service with the Russian army in 1998. The Kornet is among the most capable Russian ATGMs. It is not intended to fully replace previous systems, due to its high cost. The Kornet comes in variants with thermobaric warheads for use against soft targets. It was further developed into the 9M133 Kornet-EM, which has increased range, fire-and-forget capability, and an improved warhead. The Kornet has been widely exported and is produced under license in several countries. It was first used in combat in 2003 and has since been used in many conflicts. The NATO reporting name AT-14 Spriggan is derived from the spriggan, a legendary creature from Cornish faery lore.
  • 5.4K
  • 08 Nov 2022
Topic Review
A 4.0-based soft transducer for vitals telemonitoring
This work addresses the design, development and implementation of a 4.0-based wearable soft transducer for patient-centered, vitals telemonitoring. In particular, first, the soft transducer measures hypertension-related vitals (heart rate, oxygen saturation and systolic/diastolic pressure), and sends the data to a remote database (which can be easily consulted both by the patient and the physician). In addition to this, a dedicated deep learning algorithm, based on a Long-Short-Term-Memory Autoencoder, was designed, implemented and tested for providing an alert when the patient's vitals exceed certain thresholds, which are automatically personalized for the specific patient. Furthermore, a mobile application (EcO2u) was developed to manage the entire data flow and facilitate the data fruition; this application also implements an innovative face-detection algorithm that ensures the identity of the patient. The robustness of the proposed soft transducer was validated experimentally on five individuals, who used the system for 30 days. Experimental results demonstrated an accuracy in anomaly detection greater than 93 %, with a true positive rate of more than 94 %.
  • 412
  • 19 Apr 2022
Topic Review
A Blockchain Prototype on Container Shipping Operations
Blockchain technology has been proposed as a solution to these concerns. It is a decentralised ledger system that can record and track transactions in a secure and transparent manner. Moreover, it is possible to create a tamper-proof record of the container’s movements and status throughout the shipping process using blockchain to record the data from e-seals.
  • 281
  • 09 Aug 2023
Topic Review
A city Multi-Floor Manufacturing Cluster
Multi-floor manufacturing cluster (MFMC) comprise production and service enterprises of various types of ownership, mainly SMEs, with different production orientations, with the presence of small-scale in-house equipment. This feature of MFMC promotes business competition, allowing for creating collaborative and networked organizations that can happen at some stages of development and can reach a level of a virtual manufacturing network based on Digital Twins models to fulfil customer orders.
  • 851
  • 28 Mar 2022
Topic Review
A Decision Support Tool for Buying Farm Tractors
Tractors are the most important equipment for most of the farmers. Data science can help farmers when making a decision about tractor purchase. Buying a tractor represents a big investment for farmers, and price is one of their main concerns. This study presents the development of a web-based decision support tool (DST) that calculate the price of new and second-hand tractors, for the purpose of providing the decision-maker some information that will lead him to the final decision. The tool makes use of different algorithms based on predictive analytics methodologies. 
  • 367
  • 10 Mar 2022
Topic Review
A Light-Electric-Vehicle Batteries Maintenance Tool
This work proposes an open-hardware low-cost battery maintenance tool architecture that can be used with common laboratory instruments. The tool is based on a relay matrix and a battery monitor integrated circuit. It is able to completely characterize and optimize the state of a battery independently of the battery management system and also gives a figure of the individual aging of the battery cells. The work shows the architecture and the experimental validation of a 16-cells battery maintenance tool prototype. The results demonstrate that utilizing the tool brings the battery to the best possible state and identifies the degradation of the cells in terms of capacity and resistance.
  • 451
  • 12 Nov 2021
Topic Review
A Low-Cost, Flexible Pressure Capacitor Sensor using Polyurethane for Wireless Vehicle Detection
Detection of vehicles on the road can contribute to the establishment of an intelligent transportation management system to allow smooth transportation and the reduction of road accidents. Thus far, an efficient and low-cost polymer flexible pressure sensor for vehicle detection is lacking. This paper presents a flexible sensor for vehicle sensing and demonstrates a wireless system for monitoring vehicles on the road. A vehicle sensor is fabricated by sandwiching a polyurethane material between Aluminum top/bottom electrodes. The sensing mechanism is based on changes in capacitance due to variation in the distance between the two electrodes at an applied external pressure. A clear response against a pressure load of 0.65 Mpa is observed, which is the same pressure as that of the car tire area in contact with the road. Significantly, the sensor is easy to embed on the road line due to its mechanical flexibility and large size. A field test is carried out by embedding the sensor on the road and crossing the sensor with a car. Moreover, the signal displayed on the tablet indicates that the sensing system can be used for wireless detection of the axle, speed, or weight of the vehicle on the road. The findings suggest that the flexible pressure sensor is a promising tool for use as a low-cost vehicle detector in future intelligent transportation management.
  • 2.0K
  • 28 Oct 2020
Topic Review
A Multi-Level Optimization Approach
Researchers optimizes Chlorine Booster Stations (CBS) location on a network with two main objectives; (1) to deliver minimal Free Residual Chlorine (FRC) throughout all demand nodes according to country regulations, and (2) to reduce day chlorine mass concentration supplied in the system by applying an hour time pattern in CBS, consequently associated economic, energy and environmental impacts complying with regulatory standards
  • 443
  • 28 Oct 2021
Topic Review
A Multimodal Robust for Coal Mine Mobile Robots
Mobile robots in complex underground coal mine environments are still unable to achieve accurate pose estimation and the real-time reconstruction of scenes with absolute geographic information. Integrated terrestrial-underground localization and mapping technologies have still not been effectively developed.
  • 130
  • 09 Nov 2023
Topic Review
A New Parcel Delivery System
This entry proposes a novel parcel delivery system which consists of a drone and public transportation vehicles such as trains, trams, etc. This system involves two delivery schemes: drone-direct scheme referring to delivering to a customer by a drone directly and drone–vehicle collaborating scheme referring to delivering a customer based on the collaboration of a drone and public transportation vehicles. The fundamental characteristics including the delivery time, energy consumption and battery recharging are modelled, based on which a time-dependent scheduling problem for a single drone is formulated. It is shown to be NP-complete and a dynamic programming-based exact algorithm is presented. Since its computational complexity is exponential with respect to the number of customers, a sub-optimal algorithm is further developed. This algorithm accounts the time for delivery and recharging, and it first schedules the customer which leads to the earliest return.
  • 790
  • 01 Nov 2020
  • Page
  • of
  • 677
Video Production Service