Topic Review
Detroit Diesel 60
The Detroit Diesel Series 60 is an inline-six 4 stroke diesel engine produced since 1987. At that time, it differed from most on-highway engines by using an overhead camshaft and "drive by wire" electronic control. In 1993, it was popular on many USA buses in the 11.1 L (677 cu in) displacement.
  • 897
  • 07 Nov 2022
Topic Review
A Novel Composited Electromagnetic Linear Actuator
Electromagnetic linear actuators, as key executive components, have a vital impact on the performance of fully flexible variable valve trains. The research results show that the maximum starting force of the composited electromagnetic linear actuator (CELA) with the end-passive self-holding ability is 574.92 N while the holding force can approach 229.25 N. Moreover, the CELA is proven to have excellent dynamic characteristics and control precision under different motion modes and to have an improved adaptability to the complex working conditions of internal combustion engines.
  • 897
  • 11 Jan 2022
Topic Review
Perovskite Solar Cell
Organic-inorganic hybrid perovskite materials have attracted tremendous attention as a key material in various optoelectronic devices. Distinctive optoelectronic properties, such as a tunable energy band position, long carrier diffusion lengths, and high charge carrier mobility, have allowed rapid progress in various perovskite-based optoelectronic devices (solar cells, photodetectors, light emitting diodes (LEDs), and lasers). Interestingly, the developments of each field are based on different characteristics of perovskite materials which are suitable for their own applications. 
  • 896
  • 20 Jan 2021
Topic Review
Breguet 19
The Breguet 19 (Breguet XIX, Br.19 or Bre.19) was a light bomber and reconnaissance aircraft, also used for long-distance flights, designed by the French Breguet company and produced from 1924.
  • 895
  • 23 Nov 2022
Topic Review
Fault Detection in DHC Systems
Peak shaving, demand response, fast fault detection, emissions and costs reduction are some of the main objectives to meet in advanced district heating and cooling (DHC) systems. In order to enhance the operation of infrastructures, challenges such as supply temperature reduction and load uncertainty with the development of algorithms and technologies are growing. Therefore, traditional control strategies and diagnosis approaches cannot achieve these goals. Accordingly, to address these shortcomings, researchers have developed plenty of innovative methods based on their applications and features. The main purpose of this article is to review recent publications that include both hard and soft computing implementations such as model predictive control and machine learning algorithms with applications also on both fourth and fifth generation district heating and cooling networks. 
  • 895
  • 18 Feb 2021
Topic Review
Abrasive Waterjet Machining
Abrasive Waterjet Machining (AWJM) is considered a viable alternative to conventional machining processes, due to its capability of rendering even complex features on parts with high productivity. However, it is currently also important for manufacturing processes to comply with the various aspects of sustainability, by putting emphasis on the environmental dimension apart from the economic. Although AWJM generally is considered an inherently environmentally friendly process, it is required that thorough experimental studies be carried out to evaluate the sustainability of AWJM under various conditions. 
  • 895
  • 14 Aug 2021
Topic Review
Fractional Calculus in Electromagnetic Theory
Fractional calculus (FC) was introduced more than 300 years ago as a generalization of classical derivative and integral definitions. It is receiving increasing attention for a growing number of applications in different sciences such as physics, biology, chemistry, engineering, finance, mechanics, optics and, in particular, for modeling physical phenomena related to non-Markovian processes, signal and image processing, dielectric relaxation, viscoelasticity, electromagnetism, control theory, pharmacokinetics, fluids, heat transfer, and so on.
  • 895
  • 27 May 2022
Topic Review
Nanofiber Polymers for Biomedical Applications
The features of the nanofibers (NFs) that are used to coat biomedical Ti-based implants are predominantly dependent on the type of polymer employed. Applicable polymers are categorized as either natural or synthetic based on their source and composition. Natural polymers, namely cellulose, collagen, gelatin, chitosan, chitin, dextrose and silk fibroin, have been electrospun into NF scaffolds.
  • 894
  • 13 May 2022
Topic Review
Energy Efficiency Improvement
The school buildings represent an energivorus sector of the real estate where different efficiency actions are necessary. Literature shows how the design of a multi-energy system offers numerous advantages, however, there are problems related to the integration of cogeneration units with renewable energy sources due to the low flexibility of the first one and the high degree of uncertainty of the latter. The authors provide an alternative solution through the analysis of a case study consisting of a Multiple Energy System on three Sicilian schools, focusing on the system's operational strategy, on design and sizing of components and trying to exploit the energy needs complementarity of buildings instead of integrating the conventional energy storage systems. Not considering school activities in summer, it was decided to install a cogeneration unit sized on winter thermal loads, whereas the electricity demand not covered was reduced with photovoltaic systems designed to maximizing production for seasonal use and with loads concentrated in the morning hours. The effectiveness of this idea, which can be replicated for similar users and areas, is proved by a payback-time less than 11 years and a reduction of 31.77%, of the CO2 emissions.
  • 894
  • 10 Nov 2020
Topic Review
Sod Roof
A sod roof, or turf roof, is a traditional Scandinavian type of green roof covered with sod on top of several layers of birch bark on gently sloping wooden roof boards. Until the late 19th century, it was the most common roof on rural log houses in Norway and large parts of the rest of Scandinavia. Its distribution roughly corresponds to the distribution of the log building technique in the vernacular architecture of Finland and the Scandinavian peninsula. The load of approximately 250 kg per m² of a sod roof is an advantage because it helps to compress the logs and make the walls more draught-proof. In winter the total load may well increase to 400 or 500 kg per m² because of snow. Sod is also a reasonably efficient insulator in a cold climate. The birch bark underneath ensures that the roof will be waterproof. The term ‘sod roof’ is somewhat misleading, as the active, water-tight element of the roof is birch bark. The main purpose of the sod is to hold the birch bark in place. The roof might just as well have been called a "birch bark roof", but its grassy outward appearance is the reason for its name in Scandinavian languages: Norwegian and Swedish torvtak, Icelandic torfþak. A sod roof is well suited to the dynamics of a barter economy because the materials are ubiquitous and cost nothing, although the work is labour-intensive. However, a typical household in the era that sod roofs were most common would usually possess a lot of manpower, and neighbours would typically be invited to take part in the roofing party, similar to a barn raising in the United States . The Norwegian term dugnad denotes an established custom in rural communities, where large undertakings were accomplished with help from neighbours.
  • 894
  • 29 Sep 2022
  • Page
  • of
  • 650
ScholarVision Creations