Topic Review
Corrosion and Scaling in Geothermal Heat Exchangers
Geothermal power is an attractive and environmentally friendly energy source known for its reliability and efficiency. Unlike some renewables like solar and wind, geothermal energy is available consistently, making it valuable for mitigating climate change. Heat exchangers play a crucial role in geothermal power plants, particularly in binary cycle plants, where they represent a significant portion of capital costs. Protecting these components from deterioration is essential for improving plant profitability. Corrosion is a common issue due to direct contact with geothermal fluid, which can lead to heat exchanger failure.
  • 526
  • 31 Oct 2023
Topic Review
Non-Alkaloid Cholinesterase Inhibitory Compounds
The classes of cholinesterase inhibitors discussed here are mainly terpenoids, phenolic compounds, and coumarins, and some of these compounds have shown high potency. In order to consider which classes are most suitable, based on the benefits and drawbacks, certain structural features of each class will be of great importance. Using chalcones as an example, it is believed that besides economical and cost-effective production, small molecular size and flexibility for modifications to improve lipophilicity necessary for blood-brain barrier permeability are important to consider for a preferred potential therapeutic candidate for AD.
  • 525
  • 29 Sep 2021
Topic Review
Sea Water and Cement-Based Materials
The use of blast furnace cement is an effective way to meet the requirements of sustainable development. However, CEM III/C is characterized by slow strength gain. The problem can be worse for plasticized reinforced blast furnace cement concretes mixed with sea water in view of shorter durability. The mitigation of corrosion in plasticized blast furnace cement concretes mixed with sea water can be provided through a composition of minor additional constituents, with percentage by mass of the main constituents: alkali metal compounds, 2…3; calcium aluminate cement, 1; clinoptilolite, 1. The alkali metal compounds are known to activate hydraulic properties of ground granulated blast furnace slag. A calcium aluminate cement promotes the accelerated chemical binding of Cl− and SO42−-ions with the formation of Kuzel’s salt. A clinoptilolite occludes these aggressive ions. The positive effects of the mentioned minor additional constituents in the blast furnace cement were supported by the increased early strength gain and the higher structural density, as well as by a good state of steel reinforcement, in the plasticized concretes mixed with sea water.
  • 525
  • 28 Apr 2022
Topic Review
Nano-Scaled Materials and Polymer Integration in Biosensing Tools
The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors.
  • 525
  • 19 Jun 2022
Topic Review
Proinsulin
Proinsulin is the prohormone precursor to insulin made in the beta cells of the islets of Langerhans, specialized regions of the pancreas. In humans, proinsulin is encoded by the INS gene. The islets of Langerhans only secrete between 1% and 3% of proinsulin intact. However, because proinsulin has a longer half life than insulin, it can account for anywhere from 5–30% of the insulin-like structures circulating in the blood. There are higher concentrations of proinsulin after meals and lower levels when a person is fasting. Additionally, while proinsulin and insulin have structural differences, proinsulin does demonstrate some affinity for the insulin receptor. Due to the relative similarities in structure, proinsulin can produce between 5% and 10% of the metabolic activity similarly induced by insulin. Proinsulin is the final single chain protein structure secreted by cells before cleavage into mature insulin. Proinsulin was discovered by Professor Donald F. Steiner of the University of Chicago in 1967.
  • 525
  • 24 Nov 2022
Topic Review
Ion-Selective Electrodes Sensitive to Nitrates Ions
Ion-selective electrodes are a popular analytical tool useful in the analysis of cations and anions in environmental, industrial and clinical samples. 
  • 525
  • 07 Oct 2023
Topic Review
Metal Nanoparticles against Viruses
This study is an actual review about of recent studies using metal nanocomposites as antivirals against coronavirus and structurally similar viruses. We wrote this review in a new perspective, within the scope of nanomaterials, the purpose of the review is to demonstrate the potential of nanoparticles in combating the COVID-19 pandemic.
  • 524
  • 28 Jan 2022
Topic Review
Stochastic Microsensors
Two three-dimensional (3D) stochastic microsensors based on immobilization of protoporphyrin IX (PIX) in single-walled carbon nanotubes (SWCNT) and multi-walled carbon nanotubes (MWCNT) decorated with copper (Cu) and gold (Au) nanoparticles were designed and used for the molecular recognition of isocitrate dehydrogenase 1 (IDH1) and isocitrate dehydrogenase 2 (IDH2) in biological samples (brain tumor tissues, whole blood).
  • 524
  • 22 Feb 2022
Topic Review
Metal Corrosion Compounds Induced by Heritage Glass
Many heritage objects consist of glass in contact with metals. By ion exchange with absorbed water, alkaline aqueous films are formed on the glass surface. They contain sodium and/or potassium, hydroxide, and carbonate (uptake of carbon dioxide) ions. These electrolytes induce corrosion while in contact with metal and cause unusual corrosion products.
  • 524
  • 20 Sep 2022
Topic Review
Green Synthesis of Carbon Nanoparticles from Biomass
Carbon nanoparticles (CNPs) have demonstrated utility in a wide range of biological applications such as imaging, sensing and as surface-coatings. Biomass waste can be derived from either plant or animal matter as a result of processing higher-value materials, for instance leaves from trees as by product from processed wood or paper production. Biomass is abundant: trees, agriculture crops, energy crops, fruits, vegetation, wood, aquatic plants and algae, general municipal waste and animal waste.
  • 524
  • 31 Jan 2023
  • Page
  • of
  • 467
ScholarVision Creations