Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Chemical Beam Epitaxy
Chemical beam epitaxy (CBE) forms an important class of deposition techniques for semiconductor layer systems, especially III-V semiconductor systems. This form of epitaxial growth is performed in an ultrahigh vacuum system. The reactants are in the form of molecular beams of reactive gases, typically as the hydride or a metalorganic. The term CBE is often used interchangeably with metal-organic molecular beam epitaxy (MOMBE). The nomenclature does differentiate between the two (slightly different) processes, however. When used in the strictest sense, CBE refers to the technique in which both components are obtained from gaseous sources, while MOMBE refers to the technique in which the group III component is obtained from a gaseous source and the group V component from a solid source.
  • 460
  • 30 Nov 2022
Topic Review
Chemical Ionization
Chemical ionization (CI) is a soft ionization technique used in mass spectrometry. This was first introduced by Burnaby Munson and Frank H. Field in 1966. This technique is a branch of gaseous ion-molecule chemistry. Reagent gas molecules (often methane or ammonia) are ionized by electron ionization to form reagent ions, which subsequently react with analyte molecules in the gas phase to create analyte ions for analysis by mass spectrometry. Negative chemical ionization (NCI), charge-exchange chemical ionization, atmospheric-pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) are some of the common variants of the technique. CI mass spectrometry finds general application in the identification, structure elucidation and quantitation of organic compounds as well as some utility in biochemical analysis. Samples to be analyzed must be in vapour form, or else (in the case of liquids or solids), must be vapourized before introduction into the source.
  • 607
  • 28 Nov 2022
Topic Review
Plasma
Plasma (from grc πλάσμα (plásma) 'moldable substance') is one of the four fundamental states of matter. It contains a significant portion of charged particles – ions and/or electrons. The presence of these charged particles is what primarily sets plasma apart from the other fundamental states of matter. It is the most abundant form of ordinary matter in the universe, being mostly associated with stars, including the Sun. It extends to the rarefied intracluster medium and possibly to intergalactic regions. Plasma can be artificially generated by heating a neutral gas or subjecting it to a strong electromagnetic field. The presence of charged particles makes plasma electrically conductive, with the dynamics of individual particles and macroscopic plasma motion governed by collective electromagnetic fields and very sensitive to externally applied fields. The response of plasma to electromagnetic fields is used in many modern technological devices, such as plasma televisions or plasma etching. Depending on temperature and density, a certain amount of neutral particles may also be present, in which case plasma is called partially ionized. Neon signs and lightning are examples of partially ionized plasmas. Unlike the phase transitions between the other three states of matter, the transition to plasma is not well defined and is a matter of interpretation and context. Whether a given degree of ionization suffices to call a substance 'plasma' depends on the specific phenomenon being considered.
  • 2.4K
  • 25 Nov 2022
Topic Review
Shock Capturing Method
In computational fluid dynamics, shock-capturing methods are a class of techniques for computing inviscid flows with shock waves. The computation of flow containing shock waves is an extremely difficult task because such flows result in sharp, discontinuous changes in flow variables such as pressure, temperature, density, and velocity across the shock.
  • 568
  • 25 Nov 2022
Topic Review
Action
In physics, action is a numerical value describing how a physical system has changed over time. Action is significant because the equations of motion of the system can be derived through the principle of stationary action. In the simple case of a single particle moving with a specified velocity, the action is the momentum of the particle times the distance it moves, added up along its path, or equivalently, twice its kinetic energy times the length of time for which it has that amount of energy, added up over the period of time under consideration. For more complicated systems, all such quantities are added together. More formally, action is a mathematical functional which takes the trajectory, also called path or history, of the system as its argument and has a real number as its result. Generally, the action takes different values for different paths. Action has dimensions of energy × time or momentum × length, and its SI unit is joule-second (like the Planck constant h).
  • 2.0K
  • 25 Nov 2022
Topic Review
Mie–Gruneisen Equation of State
The Mie–Grüneisen equation of state is a relation between the pressure and the volume of a solid at a given temperature. It is used to determine the pressure in a shock-compressed solid. The Mie–Grüneisen relation is a special form of the Grüneisen model which describes the effect that changing the volume of a crystal lattice has on its vibrational properties. Several variations of the Mie–Grüneisen equation of state are in use. The Grüneisen model can be expressed in the form where V is the volume, p is the pressure, e is the internal energy, and Γ is the Grüneisen parameter which represents the thermal pressure from a set of vibrating atoms. If we assume that Γ is independent of p and e, we can integrate Grüneisen's model to get where p0 and e0 are the pressure and internal energy at a reference state usually assumed to be the state at which the temperature is 0K. In that case p0 and e0 are independent of temperature and the values of these quantities can be estimated from the Hugoniot equations. The Mie–Grüneisen equation of state is a special form of the above equation.
  • 1.4K
  • 22 Nov 2022
Topic Review
Levitated Dipole Experiment
The Levitated Dipole Experiment (LDX) was an experiment investigating the generation of fusion power using the concept of a levitated dipole. The device was the first of its kind to test the levitated dipole concept and was funded by the US Department of Energy. The machine was also part of a collaboration between the MIT Plasma Science and Fusion Center and Columbia University, where another levitated dipole experiment, the Collisionless Terrella Experiment (CTX), was located. LDX ceased operations in November 2011 when its funding from the Department of Energy ended as resources were being diverted to tokamak research.
  • 627
  • 22 Nov 2022
Topic Review
Biogas
Biogas refers to a mixture of different gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from raw materials such as agricultural waste, manure, municipal waste, plant material, sewage, green waste or food waste. Biogas is a renewable energy source. Biogas can be produced by anaerobic digestion with methanogen or anaerobic organisms, which digest material inside a closed system, or fermentation of biodegradable materials. This closed system is called an anaerobic digester, biodigester or a bioreactor. Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat. Biogas can be compressed, the same way as natural gas is compressed to CNG, and used to power motor vehicles. In the United Kingdom , for example, biogas is estimated to have the potential to replace around 17% of vehicle fuel. It qualifies for renewable energy subsidies in some parts of the world. Biogas can be cleaned and upgraded to natural gas standards, when it becomes bio-methane. Biogas is considered to be a renewable resource because its production-and-use cycle is continuous, and it generates no net carbon dioxide. As the organic material grows, it is converted and used. It then regrows in a continually repeating cycle. From a carbon perspective, as much carbon dioxide is absorbed from the atmosphere in the growth of the primary bio-resource as is released, when the material is ultimately converted to energy.
  • 1.9K
  • 22 Nov 2022
Topic Review
Effective Atomic Number
Effective atomic number has two different meanings: one that is the effective nuclear charge of an atom, and one that calculates the average atomic number for a compound or mixture of materials. Both are abbreviated Zeff.
  • 1.7K
  • 22 Nov 2022
Topic Review
Negawatt Power
Negawatt power is a theoretical unit of power representing an amount of electrical power (measured in watts) saved. The energy saved is a direct result of energy conservation or increased energy efficiency. The term was coined by the chief scientist of the Rocky Mountain Institute and environmentalist Amory Lovins in 1985, within the article, "Saving Gigabucks with Negawatts," where he argued that utility customers don’t want kilowatt-hours of electricity; they want energy services such as hot showers, cold beer, lit rooms, and spinning shafts, which can come more cheaply if electricity is used more efficiently. Lovins felt an international behavioral change was necessary in order to decrease countries' dependence on excessive amounts of energy. The concept of a negawatt could influence a behavioral change in consumers by encouraging them to think about the energy that they spend. A negawatt market can be thought of as a secondary market, in which electricity is allocated from one consumer to another consumer within the energy market. In this market, negawatts could be treated as a commodity. Commodities have the ability to be traded across time and space, which would allow negawatts to be incorporated in the international trading system. Roughly 10% of all U.S. electrical generating capacity is in place to meet the last 1% of demand and there is where the immediate efficiency opportunity exists. On March 15, 2011, the Federal Energy Regulatory Commission (FERC), the agency that regulates the U.S. electrical grid, approved a rule establishing the approach to compensation for demand response resources intended to benefit customers and help improve the operation and competitiveness of organized wholesale energy markets. This means that negawatts produced by reducing electrical use can demand the same market prices as real megawatts of generated electricity. The incentives for a negawatt market include receiving money, reduction of national energy dependency, and the local electricity deregulation within certain nations or states. As for the cost incentive, those who produce negawatts or simply conserve energy can earn money by selling the saved energy. The negawatt market could help nations or states obtain a deregulated electricity system by creating another market to purchase electricity from. The negawatt market also has two main drawbacks. Currently, there is no way to precisely measure the amount of energy saved in negawatts, and electricity providers may not want customers to use less energy due to the loss of profit.
  • 7.0K
  • 22 Nov 2022
  • Page
  • of
  • 9
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Feedback