Topic Review
Ferroelastic Twinning in Minerals
Ferroelastic twinning in minerals is a very common phenomenon. The twin laws follow simple symmetry rules and they are observed in minerals, like feldspar, palmierite, leucite, perovskite, and so forth. The major discovery over the last two decades was that the thin areas between the twins yield characteristic physical and chemical properties, but not the twins themselves. Research greatly focusses on these twin walls (or ‘twin boundaries’); therefore, because they possess different crystal structures and generate a large variety of ‘emerging’ properties. Research on wall properties has largely overshadowed research on twin domains. 
  • 1.1K
  • 15 Jun 2021
Topic Review
Large-Scale Li-Ion Battery in Mining Industry
The lithium-ion battery (LIB) has the advantages of high energy density, low self-discharge rate, long cycle life, fast charging rate and low maintenance costs. It is one of the most widely used chemical energy storage devices at present. The safety of LIB is the main factor that restricts its commercial scalable application, specifically in hazardous environments such as underground coal mines.
  • 1.0K
  • 07 Jun 2022
Topic Review
Sodium Metabisulfite on Selective Flotation of Chalcopyrite/Molybdenite
Sodium metabisulfite (MBS) was used in this study for selective flotation of chalcopyrite and molybdenite. Microflotation tests of single and mixed minerals were performed to assess the floatability of chalcopyrite and molybdenite. The results of microflotation of single minerals showed that MBS treatment significantly depressed the floatability of chalcopyrite and slightly reduced the floatability of molybdenite. The results of microflotation of mixed minerals demonstrated that the MBS treatment could be used as a selective chalcopyrite depressant in the selective flotation of chalcopyrite and molybdenite. Furthermore, the addition of diesel oil or kerosene could significantly improve the separation efficiency of selective flotation of chalcopyrite and molybdenite using MBS treatment.
  • 948
  • 20 Dec 2021
Topic Review
Environmental Management Strategies in Mining Industry in Chile
Sustainable development in the mining industry is a critical concern for companies because it covers multiple environmental, social, and economic approaches. The principal aim of sustainable development is to find the equilibrium between environmental, social, and economic aspects to maintain the system’s stability. In this sense, defining mining sustainability is a complex task because of the multidimensional definition of sustainability. However, the primary concern of the environmental sustainability of the mining industry is to avoid and reduce environmental impact at different stages of the mining life cycle, where the mining industry needs to anticipate possible negative effects that its operations may generate. The mining industry faces diverse challenges to maintain sustainable production, particularly regarding critical water and energy supplies. As a significant player in the copper mining industry, Chile has become a global reference. The most prevailing strategies involved implementing Environmental Management Systems, which allow organisations to define, implement, and track their specific goals and standards.
  • 897
  • 28 Apr 2022
Topic Review
Mullite-Based Ceramics from Mining Waste
Mullite (3Al2O3·2SiO2) is an aluminosilicate characterized by excellent physical properties, which makes it an important ceramic material. In this way, ceramics based on mullite find applications in different technological fields as refractory material (metallurgy, glass, ceramics, etc.), matrix in composite materials for high temperature applications, substrate in multilayer packaging, protective coatings, components of turbine engines, windows transparent to infrared radiation, etc. However, mullite is scarce in nature so it has to be manufactured through different synthesis methods, such as sintering, melting-crystallization or through a sol-gel route. 
  • 853
  • 29 Jul 2021
Topic Review
Talc Flotation
Talc is a naturally hydrophobic gangue mineral in most sulfide ores. However, talc has vast applications in the cosmetics, paper, and paint industries due to its high chemical stability, and its demand continues to grow. Since flotation is the most effective beneficiation technique for upgrading sulfides, the high hydrophobicity of talc has made its selective separation challenging. 
  • 778
  • 29 Jul 2021
Topic Review
The Double-Tube Heat Exchanger Performance
The double-tube heat exchanger is one of the most common designs of heat exchangers used in commercial and industrial applications. It is the simplest and one in which hot and cold fluids move in same or opposite directions. Various methods are presented to improve a double-tube heat exchanger.  
  • 767
  • 26 Oct 2022
Topic Review
Beneficiation Methods of Borate Minerals
The modern boron applications have adsorbed the mineral processors’ attention to improve typical boron mineral’s (BM) beneficiation methods. In this regard, dry treatment and pretreatment processes—such as magnetic separation and calcination as environmentally friendly methods, due to their minimal or zero adverse effect on the environment—need more consideration. Over the years, anionic flotation has become the main technique for beneficiation of friable BMs; however, there is a gap in the investigation of cationic flotation separation since BMs’ surface negatively charges in a wide pH range. At present, enriching BMs’ flotation via surface modification is taking center stage, which can also be considered for reprocessing long-forgotten BM tailings.
  • 722
  • 31 Mar 2021
Topic Review
Factors envolved in Coal Slurry Flocculation Process
Coal slurry is a mixture of finely grained coal and other minerals suspended and/or sediment in the water, generated during the coal preparation processes, accounting for more than half of mining operating cost. Dewatering technology is simultaneously confronted with obstacles and possibilities, and it may yet be improved as the crucial step for reducing the ultimate processing cost. Coagulation/flocculation is a process in which solid and liquid parts of a solution are separated using different types of coagulants and flocculants.
  • 715
  • 08 Apr 2022
Topic Review
Thionocarbamates in Copper Slag Flotation
Thionocarbamates are the group of collectors that are mostly used for flotation of sulphide copper minerals, alone or in combination with xanthates depending on a mineralogical composition of the ore. Collectors are a group of reagents used in flotation for enhancing hydrophobicity of wanted minerals. They are organic compounds which are being adsorbed on surfaces of desired minerals, thus making them hydrophobic, reducing the stability of the hydrated layer separating the mineral from the air bubble to such extent that attachment of the particle to the bubble can be made, i.e., collectors reduce the induction time. Another purpose of collectors is to provide selectivity of minerals with similar floatability properties.
  • 611
  • 31 May 2022
  • Page
  • of
  • 5