Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Zeiss Inner Rail
Zeiss Inner Rail, often simply called Zeiss rail, is a ringless telescopic sight mounting system introduced by Zeiss in 1990 as an alternative to traditional ring mounts. A patent was granted in 1992, and the patent expired in 2008. The mounting system is now also offered on sights sold by other major manufacturers, such as Blaser, Leica, Minox, Meopta, Nikon, Noblex (formerly Docter), Schmidt & Bender and Steiner. It has therefore, in some sense, become the industry standard for scope mounting rails. The system has so far seen most use on the European high end market.
  • 478
  • 30 Nov 2022
Topic Review
Wire Arc Additive Manufacturing Process
Wire arc additive manufacturing (WAAM) is an emerging and promising technology for producing medium-to-large-scale metallic components/structures for different industries, i.e., aerospace, automotive, shipbuilding, etc. It is now a feasible alternative to traditional manufacturing processes due to its shorter lead time, low material waste, and cost effectiveness. WAAM has been widely used to produce components using different materials, including copper-based alloy wires, in the past decades. 
  • 815
  • 19 Jun 2023
Topic Review
Welding between Batteries and Busbars for Electric Vehicles
Electric vehicle battery systems are made up of a variety of different materials, each battery system contains hundreds of batteries. There are many parts that need to be connected in the battery system, and welding is often the most effective and reliable connection method. Laser welding has the advantages of non-contact, high energy density, accurate heat input control, and easy automation, which is considered to be the ideal choice for electric vehicle battery manufacturing. In all the production processes of power battery packs, there is a key process, that is, the welding of a single lithium battery and the connector. This is the key to the quality of series and parallel lithium-ion battery cells, that is, the welding of the battery pole and the busbars. The quality of the welding here will directly affect the reliability of the quality of the lithium-ion battery pack used as a power source for electric vehicles.
  • 380
  • 14 Aug 2023
Topic Review
Weld Pool Formation in Keyhole Plasma Arc Welding
The Keyhole Plasma Arc Welding (KPAW) process utilizes arc plasma highly constricted by a water-cooled cupper nozzle to produce great arc pressure for opening a keyhole in the weld pool, achieving full penetration to the thick plate. However, advanced control of welding is known to still be difficult due to the complexity of the process mechanism, in which thermal and dynamic interactions among the arc, keyhole, and weld pool are critically important. In KPAW, two large eddies are generally formed in the weld pool behind the keyhole by plasma shear force as the dominant driving force. These govern the heat transport process in the weld pool and have a strong influence on the weld pool formation process. The weld pool flow velocity is much faster than those of other welding processes such as Tungsten Inert Gas (TIG) welding and Gas Metal Arc (GMA) welding, enhancing the heat transport to lower the weld pool surface temperature. Since the strength and direction of this shear force strongly depend on the keyhole shape, it is possible to control the weld pool formation process by changing the keyhole shape by adjusting the torch design and operating parameters. If the lower eddy is relatively stronger, the heat transport to the bottom side increases and the penetration increases. However, burn-through is more likely to occur, and heat transport to the top side decreases, causing undercut. In order to realize further sophistication of KPAW, a deep theoretical understanding of the process mechanism is essential. 
  • 73
  • 21 Mar 2024
Topic Review
Wearables in Higher Education
Wearable sensors have traditionally been used to measure and monitor vital human signs for well-being and healthcare applications. However, there is a growing interest in using and deploying these technologies to facilitate teaching and learning, particularly in a higher education environment. 
  • 1.9K
  • 25 Oct 2022
Topic Review
Visual Measurement Methods for Metal Evaporation in LPBF
Laser powder bed fusion (LPBF) is of great importance for the visual measurement and analysis of the metallization process, which is the process of solid, liquid, and gas phase transformations of metal powders under high-energy laser irradiation due to the low boiling point/high saturated vapor pressure. More and more researchers are using imaging technologies, such as high-speed X-ray, high-speed visible light cameras, and high-speed schlieren imaging, to perform noncontact visual measurements and analyses of the melt pool, vapor plume, and spatter during the metal evaporation process.
  • 270
  • 14 Jul 2023
Topic Review
Vegetable Oils as Lubricants
Vegetable oils have been used as metalworking fluids (MWFs) for many years, particularly in small-scale metalworking operations and in industries where environmental regulations are strict. Before the development of modern MWFs, vegetable oils were one of the most common lubricants used for metalworking tools. The use of vegetable oils can be traced back to ancient civilizations such as Egypt, Greece, and Rome, where olive oil was commonly used to lubricate metal tools and weapons. 
  • 2.3K
  • 19 Apr 2023
Topic Review
Utilization of Product Usage Information in Product Development
As emerging technologies such as IoT technologies become widespread, producers can collect large-scale product usage information (PUI) from different stakeholders, including retailers, customers, users, and the providers of product-related services such as maintenance, renting, and leasing. Its content, format, and quality are heterogeneous and cover, for example, service reports, review reports, and embedded systems’ measurements. This information provides producers a better understanding of user expectations, usage situations, product behavior, and performance.
  • 1.3K
  • 14 Jun 2022
Topic Review
Tungsten Inert Gas Welding Process of Dissimilar Metals
Special attention is required when joining two materials with distinct chemical, physical and thermal properties in order to make the joint bond robust and rigid. Welded samples employing ER-309L filler wires had a microstructure consisting of a delta ferrite network in an austenite matrix. The tensile strength experimental results revealed that welding current, followed by GFR, was a highly influential parameter on tensile strength. Weld metals had higher hardness and flexural strength than stainless steel and carbon steel base metals. 
  • 832
  • 15 Jul 2022
Topic Review
Transparent Nano-Ceramics for Solid-State LASERs
Solid-state lasers play a leading role in the field of laser application because they have the advantages of high peak power, high efficiency, long service life, safety, and reliability.
  • 387
  • 20 May 2022
  • Page
  • of
  • 29
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Feedback