Topic Review
Woodworking Joints
Joinery is a part of woodworking that involves joining pieces of wood or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap. In British English usage it is distinguished from carpentry which relates to structural timber work.
  • 2.0K
  • 22 Nov 2022
Topic Review
Woodward Effect
The Woodward effect, also referred to as a Mach effect, is part of a hypothesis proposed by James F. Woodward in 1990. The hypothesis states that transient mass fluctuations arise in any object that absorbs internal energy while undergoing a proper acceleration. Harnessing this effect could generate a reactionless thrust, which Woodward and others claim to measure in various experiments. Hypothetically, the Woodward effect would allow for field propulsion spacecraft engines that would not have to expel matter. Such a proposed engine is sometimes called a Mach effect thruster (MET) or a Mach Effect Gravitational Assist (MEGA) drive. So far, experimental results have not strongly supported this hypothesis, but experimental research on this effect, and its potential applications, continues. The Space Studies Institute was selected as part of NASA's Innovative Advanced Concepts program as a Phase I proposal in April 2017 for Mach Effect research. The year after, NASA awarded a NIAC Phase II grant to the SSI to further develop these propellantless thrusters. The effect is controversial within mainstream physics because the underlying model proposed for it appears to be faulty, resulting in violations of energy conservation as well as momentum conservation.
  • 2.7K
  • 16 Nov 2022
Topic Review
Woodhouse-Sakati Syndrome
Woodhouse-Sakati syndrome is a disorder that primarily affects the body's network of hormone-producing glands (the endocrine system) and the nervous system. The signs and symptoms of this condition, which gradually get worse, vary widely among affected individuals, even within the same family.  
  • 746
  • 24 Dec 2020
Topic Review
Wooden Boats of World War 2
Splinter fleet or Splinter navy was a nickname given to the wooden boats used in World War II. The boats served in many different roles during the war. These boats were built in small boatyards on the West coast and East coast, Great Lakes and the Gulf of Mexico. They could be built quickly, in just 60 to 120 days. Most of the boats were built by boatyards that already had the tools and knowledge from building yachts, sailboats and motor boats. Many were built by craftsmen in family-owned small businesses. Under the Emergency Shipbuilding Program and War Shipping Administration contracts went out to over fifty boatyards across the country. The boats were built for the US Navy, the, United States Army Air Forces , United States Coast Guard, and US Army. Some of the wooden boats went to Allied nations on the Lend-Lease program. In addition to new boat construction, some wooden boats built between 1910 and 1941 were acquired for the war effort, some used as-is and others converted for war use. Wooden boats have lighter weight and are easier to repair than steel hull boats. These wooden boats ranged from 19 to 200 feet in length. Some worked near shore and others working in the open ocean, called the Blue-water navy. The Splinter fleet is in contrast to the more common steel hull war ships and Merchant Marine ships. After the war, many of these boats were deemed not needed. Many were abandoned or destroyed, a few served in the Korean war and a few in the Vietnam War, some sold to private and some donated. During World War I there was a debate as to if wooden boats and ships should be used in war time. William Denman, President of the Emergency Fleet Corporation supported the building of wooden ships for the war and General Goethals disapproved. In the end, both men turned in their resignation over the heated debate. During World War II the situation was different. There was a shortage of steel and steel shipyards, so there was no debate about the need for a vast wooden fleet of boats and ships.
  • 3.7K
  • 14 Oct 2022
Topic Review Peer Reviewed
Wooden Additional Floor in Finland
One of the most effective ways to cover real estate development and renovation processes by improving functionality and energy efficiency is wooden additional floor construction. The scattered information is mapped out, organized, and collated on the current state of the art and the benefits of this practice including its different stages, focusing on the case of Finland. The topic is presented in an accessible and understandable discourse for non-technical readers. By highlighting the benefits and opportunities of this sustainable application, it will contribute to increasing the awareness of wooden additional floor construction, which has many advantages, and therefore to gain more widespread use in Finland and other countries.
  • 1.6K
  • 14 Apr 2022
Topic Review
Woodcock–Johnson Tests of Cognitive Abilities
The Woodcock–Johnson Tests of Cognitive Abilities is a set of intelligence tests first developed in 1977 by Richard Woodcock and Mary E. Bonner Johnson (although Johnson's contribution is disputed). It was revised in 1989, again in 2001, and most recently in 2014; this last version is commonly referred to as the WJ IV. They may be administered to children from age two right up to the oldest adults (with norms utilizing individuals in their 90s). The previous edition WJ III was praised for covering "a wide variety of cognitive skills".
  • 1.5K
  • 20 Oct 2022
Topic Review
Wood-Eating Insects and Wood Eaters
Dead wood is rich in sugars and can serve as an energy source when digested, but it lacks other nutrients, preventing the growth, development, and maturation of saproxylophages. Prokaryotic N fixation partially mitigates the limitations on saproxylophages by the scarcity of N, often the most limiting nutrient, what does not mitigate co-limitation by other physiologically essential nutrients. Fungal transport can shape nutrient dynamics early in wood decay, rearranging extremely scarce nutritional composition of dead wood environment during its initial stage of decomposition and assisting saproxylophage growth and development. This nutritional enrichment of dead wood creates a nutritional niche for xylophages that allows them to grow, develop, and reach maturity. Therefore, xylophagous insects (considered as “wood-eaters”) are unable to gather the necessary amounts of nutritional elements from pure dead wood to grow and mature, but instead must utilize fungal tissues.
  • 2.5K
  • 30 Oct 2020
Topic Review
Wood-Composite for Wastewater Purification and Desalination
The ecosystem has been seriously affected by sewage discharge and oil spill accidents. A series of issues (such as the continuous pollution of the ecological environment and the imminent exhaustion of freshwater resources) are becoming more and more unmanageable, resulting in a crisis of water quality and quantity. Therefore, studies on industrial wastewater purification and solar-driven seawater desalination based on wood composites have been widely considered as an important development direction. Generally, functional nanomaterials are loaded into the wood cell wall, from which lignin and hemicellulose are selectively removed. Alternatively, functional groups are modified on the basis of the molecular structure of the wood microchannels. Due to its three-dimensional (3D) pore structure and low thermal conductivity, wood is an ideal substrate material for industrial wastewater purification and solar-driven seawater desalination.
  • 272
  • 29 Dec 2023
Topic Review
Wood-based pellets in Southeastern US
Effects of pellet production on selected Sustainability Development Goals (SDGs) are evaluated using industry information, available energy consumption data, and published research findings. Challenges associated with identifying relevant SDG goals and targets for this particular bioenergy supply chain and potential deleterious impacts are discussed. We find that production of woody pellets in the SE US and shipments to displace coal for energy in Europe generate positive effects on affordable and clean energy (SDG 7), decent work and economic growth (SDG 8), industry innovation and infrastructure (SDG 9), responsible consumption and production (SDG 12), and life on land (SDG 15). Primary strengths of the pellet supply chain in the SE US are the provisioning of employment in depressed rural areas and the displacement of fossil fuels. Weaknesses are associated with potential impacts on air, water, and biodiversity that arise if the resource base and harvest activities are improperly managed. The SE US pellet supply chain provides an opportunity for transition to low-carbon industries and innovations while incentivizing better resource management.
  • 770
  • 31 Jan 2021
Topic Review
Wood Waste Management from the Furniture Industry
Proper management of wood waste (WW) from the furniture industry has become an important issue. Life-cycle assessment (LCA) is a tool that is widely used for identifying environmental gains in WW management strategies.
  • 268
  • 04 Jan 2024
  • Page
  • of
  • 5490
Video Production Service