Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
San Juan-Chama Project
The San Juan-Chama Project is a U.S. Bureau of Reclamation interbasin water transfer project located in the states of New Mexico and Colorado in the United States . The project consists of a series of tunnels and diversions that take water from the drainage basin of the San Juan River – a tributary of the Colorado River – to supplement water resources in the Rio Grande watershed. The project furnishes water for irrigation and municipal water supply to cities along the Rio Grande including Albuquerque and Santa Fe.
  • 342
  • 02 Nov 2022
Topic Review
Gravity Field and Steady-State Ocean Circulation Explorer
The Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) was the first of ESA's Living Planet Programme satellites intended to map in unprecedented detail the Earth's gravity field. The spacecraft's primary instrumentation was a highly sensitive gravity gradiometer consisting of three pairs of accelerometers which measured gravitational gradients along three orthogonal axes. Launched on 17 March 2009, GOCE mapped the deep structure of the Earth's mantle and probed hazardous volcanic regions. It brought new insight into ocean behaviour; this in particular, was a major driver for the mission. By combining the gravity data with information about sea surface height gathered by other satellite altimeters, scientists were able to track the direction and speed of geostrophic ocean currents. The low orbit and high accuracy of the system greatly improved the known accuracy and spatial resolution of the geoid (the theoretical surface of equal gravitational potential on the Earth). The satellite's unique arrow shape and fins helped keep GOCE stable as it flew through the thermosphere at a comparatively low altitude of 255 kilometres (158 mi). Additionally, an ion propulsion system continuously compensated for the variable deceleration due to air drag without the vibration of a conventional chemically powered rocket engine, thus limiting the errors in gravity gradient measurements caused by non-gravitational forces and restoring the path of the craft as closely as possible to a purely inertial trajectory. After running out of propellant, the satellite began dropping out of orbit and made an uncontrolled reentry on 11 November 2013.
  • 1.0K
  • 02 Nov 2022
Topic Review
Online Ageing Detection in Transformer Oil
Transformers play an essential role in power networks, ensuring that generated power gets to consumers at the safest voltage level. However, they are prone to insulation failure from ageing, which has fatal and economic consequences if left undetected or unattended. Traditional detection methods are based on scheduled maintenance practices that often involve taking samples from in situ transformers and analysing them in laboratories using several techniques. This conventional method exposes the engineer performing the test to hazards, requires specialised training, and does not guarantee reliable results because samples can be contaminated during collection and transportation. Researchers review the transformer oil types and some traditional ageing detection methods, including breakdown voltage (BDV), spectroscopy, dissolved gas analysis, total acid number, interfacial tension, and corresponding regulating standards. In addition, a review of sensors, technologies to improve the reliability of online ageing detection, and related online transformer ageing systems. A non-destructive online ageing detection method for in situ transformer oil is a better alternative to the traditional offline detection method. Moreover, when combined with the Internet of Things (IoT) and artificial intelligence, a prescriptive maintenance solution emerges, offering more advantages and robustness than offline preventive maintenance approaches
  • 588
  • 02 Nov 2022
Topic Review
List of Space Shuttle Landing Sites
Three locations in the United States were used as landing sites for the Space Shuttle system. Each site included runways of sufficient length to provide adequate distance for the slowing-down of a returning spacecraft. The prime landing site was the Shuttle Landing Facility at the Kennedy Space Center in Florida, a purpose-built landing strip. Landings also occurred at Edwards Air Force Base in California, and one took place at White Sands Space Harbor in New Mexico. No space shuttle landed on a dry lakebed runway after 1991. The first international site was Cartago, Valle in Colombia (CTA). Various international landing sites were also available in the event of a Transoceanic Abort Landing (TAL) scenario, as well as other sites in the United States and Canada in case of an East Coast Abort Landing (ECAL) situation. Space shuttle landings were intended to regularly take place at Vandenberg Air Force Base in California for Department of Defense missions launched from the site, but none occurred due to the cancellation of all launches from Vandenberg.
  • 10.5K
  • 02 Nov 2022
Topic Review
ATI Rage
The ATI Rage is a series of graphics chipsets offering GUI 2D acceleration, video acceleration, and 3D acceleration. It is the successor to the Mach series of 2D accelerators.
  • 771
  • 02 Nov 2022
Topic Review
Additive Manufacturing for Electromobility
Additive manufacturing (AM) offers the possibility to produce components in a resource-efficient and environmentally friendly way. AM can also be used to optimise the design of components in mechanical and physical terms. In this way, functionally integrated, lightweight, highly efficient, and innovative components can be manufactured with the help of additive manufacturing in terms of Industry 4.0. The development of drivetrains for electromobility offers far more potential than simply replacing the combustion engine with an electric motor. With the possibility of power-specific AM design, and the resulting wide variety of electric machine designs, new drivetrain topologies can be designed. The gradual reduction in mechanical drive components improves the overall efficiency of the drivetrain (tank to wheel). With regard to metal 3D printing, it is possible to combine components, functionalise them, and design them using lightweight construction approaches, so as to incur weight and component savings. 
  • 724
  • 02 Nov 2022
Topic Review
Asus Eee Pad Transformer
The Asus Eee Pad Transformer (TF101) is an Android tablet computer announced at CES 2011 and launched on 30 March 2011. The Transformer design includes an optional docking keyboard.
  • 399
  • 02 Nov 2022
Topic Review
DRDO Rustom
The DRDO Rustom (English: Warrior) is a Medium Altitude Long Endurance unmanned air vehicle (UAV) being developed by Defence Research and Development Organisation for the three services, Indian Army, Indian Navy and the Indian Air Force of the Indian Armed Forces. Rustom is derived from the NAL's LCRA (Light Canard Research Aircraft) developed by a team under the leadership of late Prof Rustom Damania in the 1980s. The UAV will have structural changes and a new engine. Rustom will replace/supplement the Heron UAVs in service with the Indian armed forces.
  • 1.9K
  • 02 Nov 2022
Topic Review
Mindwipe (Transformers)
Mindwipe is the name of two fictional characters in the Transformers toy line and fictional series by Hasbro. Both are Decepticons.
  • 571
  • 02 Nov 2022
Topic Review
Classic Car
A classic car is an older automobile; the exact definition varies around the world. The common theme is of an older car with enough historical interest to be collectable and worth preserving or restoring rather than scrapping. Cars 20 years and older typically fall into the classic class. Organizations such as the Classic Car Club of America (CCCA) and the Antique Automobile Club of America (AACA) maintain a list of eligible unmodified cars that are called "classic". These are described as "fine" or "distinctive" automobile, either American or foreign built, produced between 1915 to 1998. Post–World War II "classic cars" are not precisely defined and the term is often applied to any older vehicle.
  • 2.2K
  • 02 Nov 2022
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback