Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
First Ray Mobility
Several methods have been described to quantify the first ray mobility. They have certain disadvantages (great size, sophistication, or lack of validation). The objective of this work was to study the validity and reliability of a new instrument for the measurement of first ray mobility. This new device has characteristics that make it possible to be used in daily clinical practice, such as simplicity, lightness, small size and ease of use. The results obtained suggest that the new instrument is valid and reliable.
  • 736
  • 23 Apr 2021
Topic Review
Fischer–Tropsch Synthesis Catalysts
The Fischer–Tropsch process is considered one of the most promising eco-friendly routes for obtaining synthetic motor fuels. Fischer–Tropsch synthesis is a heterogeneous catalytic process in which a synthesis gas (CO/H2) transforms into a mixture of aliphatic hydrocarbons, mainly linear alkanes. An important research direction has been to increase the selectivity of the process for the diesel fraction. Diesel fuel synthesized via the Fischer–Tropsch method has a number of advantages over conventional fuel, including the high cetane number, the low content of aromatic, and the practically absent sulfur and nitrogen impurities. One of the possible ways to obtain a high yield of diesel fuel via the Fischer–Tropsch process is the development of selective catalysts.
  • 498
  • 30 Aug 2023
Topic Review
Fish Industry Waste and Electrochemical Energy Systems
Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. 
  • 495
  • 06 Dec 2021
Topic Review
Fish Pond Water Quality
The spread of disease caused by the presence of bacteria, algae, protozoa, and fungi in a fish pond can cause biological pollution and reduce fish product production. Water can quickly lose its ability to support life, reproduction, waste excretion, growth, and feed the fish in fish ponds. The needs of the fish, the water quality, and factors for managing the water quality should be understood by those wishing to be successful fish farmers.
  • 2.5K
  • 30 Mar 2022
Topic Review Video
Fixed and Floating Offshore Structures
Diverse forms of offshore oil and gas structures are utilized for a wide range of purposes and in varying water depths. They are designed for unique environments and water depths around the world. The applications of these offshore structures require different activities for proper equipment selection, design of platform types, and drilling/production methods. There are advances made in ocean engineering which include a variety of innovative offshore structure designs, ranging from fixed platforms to floating platforms. Some of these structures include the deep-water semisubmersible platforms, jack-up rigs, floating offshore wind turbines (FOWTs), FPS (floating production systems) units.
  • 8.5K
  • 19 Aug 2022
Topic Review
Flake Powder Metallurgy
Flake powder metallurgy (FPM) including different processing routes, conventional FPM (C-FPM), slurry blending (SB), shift-speed ball milling (SSBM), and high-shear pre-dispersion and SSBM (HSPD/SSBM). The name of FPM was derived from the use of flake metal powders obtained by low-speed ball milling (LSBM) from spherical powder. The uniformity of reinforcement distribution leads to increased strength and ductility. Powder is the basic unit in PM, especially advanced PM, and its control is key to various new PM technologies. The FPM is a typical method for finely controlling the powder shape through low-energy ball milling (LEBM) to realize the preparation of advanced material structures. 
  • 2.1K
  • 23 Jun 2021
Topic Review
Flame Synthesis of Carbon and Metal-Oxide Nanoparticles
Carbon and metal-oxide nanoparticles (NP) are synthesized worldwide for various applications in the solar-energy, optical, pharmaceutical, and biomedical industries, among many others. Gas phase methods comprise flame synthesis and flame spray pyrolysis (FSP), which provide high efficiency, low cost, and the possibility of large-scale applications. The variation of combustion operation parameters exerts significant effects on the properties of the NPs. An analysis of the latest research results relevant to NP flame synthesis can provide new insight into the optimization of these methods and the development of these techniques for a large scale. 
  • 577
  • 07 Feb 2023
Topic Review
Flashing Phenomena in Pressure Hydrometallurgy
Pressure hydrometallurgy has attracted much attention for its characteristics, such as the high adaptability of raw materials and environmental friendliness. Flashing (flash boiling or flash evaporation) refers to the phase change phenomenon from liquid to gas triggered by depressurization, which is an important connection between high-pressure processes and atmospheric ones in pressure hydrometallurgy.
  • 458
  • 18 Aug 2023
Topic Review
Flat Panel Display
Flat-panel displays are electronic viewing technologies used to enable people to see content (still images, moving images, text, or other visual material) in a range of entertainment, consumer electronics, personal computer, and mobile devices, and many types of medical, transportation and industrial equipment. They are far lighter and thinner than traditional cathode ray tube (CRT) television sets and video displays and are usually less than 10 centimetres (3.9 in) thick. Flat-panel displays can be divided into two display device categories: volatile and static. Volatile displays require that pixels be periodically electronically refreshed to retain their state (e.g., liquid-crystal displays (LCD)). A volatile display only shows an image when it has battery or AC mains power. Static flat-panel displays rely on materials whose color states are bistable (e.g., e-book reader tablets from Sony), and as such, flat-panel displays retain the text or images on the screen even when the power is off. As of 2016, flat-panel displays have almost completely replaced old CRT displays. In many 2010-era applications, specifically small portable devices such as laptops, mobile phones, smartphones, digital cameras, camcorders, point-and-shoot cameras, and pocket video cameras, any display disadvantages of flat-panels (as compared with CRTs) are made up for by portability advantages (thinness and lightweightness). Most 2010s-era flat-panel displays use LCD and/or LED technologies. Most LCD screens are back-lit as color filters are used to display colors. Flat-panel displays are thin and lightweight and provide better linearity and they are capable of higher resolution than typical consumer-grade TVs from earlier eras. The highest resolution for consumer-grade CRT TVs was 1080i; in contrast, many flat-panels can display 1080p or even 4K resolution. As of 2016, some devices that use flat-panels, such as tablet computers, smartphones and, less commonly, laptops, use touchscreens, a feature that enables users to select onscreen icons or trigger actions (e.g., playing a digital video) by touching the screen. Many touchscreen-enabled devices can display a virtual QWERTY or numeric keyboard on the screen, to enable the user to type words or numbers. A multifunctional monitor (MFM) is a flat-panel display that has additional video inputs (more than a typical LCD monitor) and is designed to be used with a variety of external video sources, such as VGA input, HDMI input from a VHS VCR or video game console and, in some cases, a USB input or card reader for viewing digital photos). In many instances, an MFM also includes a TV tuner, making it similar to a LCD TV that offers computer connectivity.
  • 3.7K
  • 25 Nov 2022
Topic Review
Flat Twin Engine
A flat-twin is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. It is a flat engine with two cylinders. Used in motorcycles for more than a century, flat-twins have also been used in automobiles, light aircraft, stationary powerplants, and household appliances. Early flat-twin motorcycles' engines were mounted with the cylinders in line with the frame. This caused uneven cooling of the cylinders and required the motorcycle to have a long wheelbase. Later flat-twin motorcycles' engines were mounted with their cylinders across the frame for better air cooling and a shorter wheelbase. Disadvantages of this layout include torque reaction in the motorcycle in turns and the potential to damage cylinder heads.
  • 2.4K
  • 27 Oct 2022
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback