Engineering | Encyclopedia MDPI

Subject:

Sort:

Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)

Type:

All Topic Review Biography

Topic Review

Uniaxial Load Specification for Vehicle Knuckle Part

Knuckle parts have a complex relationship with adjacent vehicle parts, making it difficult to determine the proper fatigue evaluation specification when considering vehicle operation. An accelerated triaxial load case for the knuckle part was derived using a combination of four event modules from the test code developed by the Korea Automotive Technology Institute. The fatigue damage analysis of the front and rear knuckle models was conducted with respect to the accelerated triaxial load case, and the maximum stress was measured at hotspots for the magnitude and orientation of the critical plane. The sensitivity analysis of the knuckle models was conducted for six directions of the unit force, and the proper uniaxial force orientations of the two knuckle models were determined for the maximum stress similarity in the triaxial load case in terms of the magnitude and orientation of the critical plane.

579
19 Dec 2022

Topic Review

Extended Reality for Civil Engineering Structures

Utilization of emerging immersive visualization technologies such as Virtual Reality (VR), Augmented Reality (AR), and Mixed Reality (MR) in the architectural, engineering, and construction (AEC) industry has demonstrated that these visualization tools can be paradigm-shifting. Extended Reality (XR), an umbrella term for VR, AR, and MR technologies, has found many diverse use cases in the AEC industry.

810
19 Dec 2022

Biography

Howard Scott (April 1, 1890 – January 1, 1970) was an American engineer and founder of the Technocracy movement. He formed the Technical Alliance and Technocracy Incorporated.[1] Little is known about Scott's background or his early life and he has been described as a "mysterious young man".[2] He was born in Virginia in 1890 and was of Scottish-Irish descent. He claimed to have been educat

1.8K
19 Dec 2022

Biography

Russell W. Porter

Russell Williams Porter (December 13, 1871 – February 22, 1949) was an United States artist, engineer, amateur astronomer and Arctic explorer.[1] He was a pioneer in the field of “cutaway illustration"[2] and is sometimes referred to as the "founder"[3][4] or one of the "founders" of amateur telescope making."[5] Russell W. Porter, the youngest of five children, was born in 1871 Springfie

572
19 Dec 2022

Biography

Samuel Rea (September 21, 1855 – March 24, 1929) was an American engineer and the ninth president of the Pennsylvania Railroad from 1913 to 1925. He joined the PRR in 1871, when the railroad had hardly outgrown its 1846 charter to build from Harrisburg to Pittsburgh, and helped it grow to a 12,000-mile (19,000 km) system. His efforts helped the railroad secure access to Manhattan, upstate New

573
19 Dec 2022

Topic Review

Smart Distribution Mechanisms

To enhance the reliability and resilience of power systems and achieve reliable delivery of power to end users, smart distribution networks (SDNs) play a vital role. The conventional distribution network is transforming into an active one by incorporating a higher degree of automation. Replacing the traditional absence of manual actions, energy delivery is becoming increasingly dependent on intelligent active system management. As an emerging grid modernization concept, the smart grid addresses a wide range of economic and environmental concerns, especially by integrating a wide range of active technologies at distribution level. At the same time, these active technologies are causing a slew of technological problems in terms of power quality and stability.

993
19 Dec 2022

Topic Review

Pendulum-based Environmental Mechanical Energy Harvesters

Energy harvesting systems based on the pendulum structures have been widely used in the low-frequency environmental energy collection applications in recent years. In this study, the research progresses of the pendulum energy harvesting structures are described in detail and summarized. The energy harvesting structures are classified according to pendulum types and different energy conversion mechanisms. The improved techniques and design schemes adopted in the relevant research are also summarized.

1.0K
18 Dec 2022

Biography

Samuel Richard Slavson (December 25, 1890 - August 5, 1981) was an American engineer, journalist and teacher, who began to engage in group analysis in 1919. He is considered one of the pioneers of group psychotherapy for his contributions to its recognition as a scientific discipline.[1] Slavson wrote over 20 books and served as the founding president of the American Group Psychotherapy Associat

425
16 Dec 2022

Biography

Larry E. Druffel (Born May 11, 1940) is an American engineer, Director Emeritus[1] and Visiting Scientist at the Software Engineering Institute (SEI) at Carnegie Mellon University. He has published over 40 professional papers/reports and authored a textbook. He is best known for leadership in: (1) bringing engineering discipline and supporting technology to software design and development, and (

464
16 Dec 2022

Biography

Rex Buren Beisel

Rex Buren Beisel (October 24, 1893 – January 26, 1972) was an American aeronautical engineer and pioneer in the science and industry of aviation. He was the lead designer of several successful military and civilian aircraft, but is best known for designing the Second World War-era Vought F4U Corsair fighter plane. Beisel was born on October 24, 1893, in San Jose, California,[1] and was rais

490
16 Dec 2022

Page
of
678

Featured Entry Collections

>>

Featured Books

>>

Encyclopedia of Social Sciences

Encyclopedia of Social Sciences
Chief Editor:
Michael McAleer

Encyclopedia of COVID-19

Encyclopedia of COVID-19
Chief Editor:
Stephen Bustin

Encyclopedia of Fungi

Encyclopedia of Fungi
Chief Editor:
Luis V. Lopez-Llorca

Encyclopedia of Digital Society, Industry 5.0 and Smart City

Encyclopedia of Digital Society, Industry 5.0 and Smart City
Chief Editor:
Sandro Serpa

ScholarVision Creations

Feedback

Top