Topic Review
Power Electronic Converters in Electric Vehicle Applications
In the electric vehicle (EV) powertrain, all the electric input sources are connected to a HV–DC bus by an individual DC–DC converter, and the output three-phase electric motor (EM), i.e., the main load of the EV, is powered from this HV–DC bus through a three-phase inverter which drives the EM. Here, the voltage level of this HV–DC bus of the EV is around 400–750 V. Moreover, moving the EV via an EM from electric batteries, a DC–DC voltage is required because the batteries’ output voltage is much lower than the required voltage of EM. A traction inverter is needed to drive the EM by converting the DC batteries into variable-frequency AC. However, a disagreement could be made for stepping up the output AC voltage level of the inverter by utilizing a high-voltage transformer instead of a DC–DC converter. This is due to its having several essential advantages, such as reliability, cost-effectiveness, compact size, and lightweight DC–DC converters appear to be excellent candidates for EVs and HEVs powertrains.
  • 7.1K
  • 10 Jan 2023
Topic Review
Sensitivity Analysis and Anaerobic Digestion Modeling
A growing awareness of global climate change has led to an increased interest in investigating renewable energy sources, such as the anaerobic digestion of biomass. This process utilizes a wide range of microbial communities to degrade biodegradable material in feedstock through a complex series of biochemical interactions. Anaerobic digestion exhibits nonlinear dynamics due to the complex and interacting biochemical processes involved. Due to its dynamic and nonlinear behavior, uncertain feedstock quality, and sensitivity to the process’s environmental conditions, anaerobic digestion is highly susceptible to instabilities. Therefore, in order to model and operate a biogas production unit effectively, it is necessary to understand which parameters are most influential on the model outputs.
  • 536
  • 10 Jan 2023
Topic Review
Resistance of Concretes to External Chlorides
Corrosion of steel reinforcement due to chloride attack remains a major reinforced concrete durability concern. The problem is prevalent for concrete structures located within marine environments or frost-prone locations where chlorides containing de-icing salts are used. 
  • 661
  • 10 Jan 2023
Topic Review
Lignin-First Biorefinery
Conventional lignocellulosic-biomass-utilization strategies have difficulty in avoiding the undesirable condensation of reactive intermediates during biomass deconstruction, which poses fundamental challenges for commercial applications. Lignin-first biorefinery inhibits the condensation of reactive intermediates either by selectively catalyzing the conversion of these intermediates to stable derivatives or by avoiding their formation by functionalizing natural structures or intermediates. This strategy has attracted wide attention from researchers since it was proposed.
  • 745
  • 10 Jan 2023
Topic Review
Control System of Wind Diesel Hybrid Systems
In regions with high renewable energy sources (RES) potential, hybrid energy systems based on diesel generators (DG) and RES are used providing diesel fuel economy. Wind diesel hybrid systems (WDHS) and wind solar diesel hybrid systems (WSDHS) are mostly widespread. The WDHS control system should select the system’s optimum operation, providing the maximum use of wind power within the whole range of wind speeds and load power. The current algorithms and control methods of WDHS and integrated WT, providing optimal scheduling and diesel fuel economy. WDHS use energy management system (EMS) and algorithms, maintaining frequency and voltage values in the system. WT control systems are used prediction methods of wind turbine (WT) energy generation, algorithms of the maximum power point tracker (MPPT) and optimal operation selection. The optimization methods of energy storage systems (ESS) charge/discharge modes are used as well.
  • 744
  • 10 Jan 2023
Topic Review
Design Concepts for Floating Offshore Wind Turbines
Offshore wind energy is a sustainable renewable energy source that is acquired by harnessing the force of the wind offshore, where the absence of obstructions allows the wind to travel at higher and more steady speeds. Offshore wind has recently grown in popularity because wind energy is more powerful offshore than on land. 
  • 6.0K
  • 10 Jan 2023
Topic Review
Agrivoltaics in Alberta Canada
As Alberta increases conventional solar power generation, land-use conflicts with agriculture increase. A solution that enables low-carbon electricity generation and continued (in some cases, increased) agricultural output is the co-locating of solar photovoltaics (PV) and agriculture: agrivoltaics.
  • 773
  • 10 Jan 2023
Topic Review
Modelling of Activated Sludge Process
The activated sludge process (ASP) is the most widely used biological wastewater treatment system. A typical model that would simulate the ASP operation will have the following steps: a model objective, data collection, mathematical equations or models for each ASP as mentioned above, model calibration, and model validation. There are three main types of modelling that have been historically used for the ASP: deterministic or mechanistic modelling, stochastic modelling, and hybrid models combining the two approaches.The most efficient models use hybrid models where stochastic modelling is used for the hard-to-define parameters and variables in the treatment process.
  • 860
  • 10 Jan 2023
Topic Review
Synergies between Shallow Geothermal Energy and DHC Networks
According to the EU Directive 2018/2001, “geothermal energy” means strictly “energy stored in the form of heat beneath the surface of solid earth”. Shallow geothermal energy (SGE) is a specific case where the temperature of the resources is generally under 30 °C (also known as “very-low enthalpy geothermal energy”). The heat exchange with surface-water bodies (sea, lakes, or rivers), ambient air, and sewage water is considered as “ambient energy” in the same document.
  • 601
  • 09 Jan 2023
Topic Review
Semantic Modeling, Simulation and Cybersecurity in the IoUT
As maritime and military missions become more and more complex and multi-factorial over the years, there has been a high interest in the research and development of (autonomous) unmanned underwater vehicles (UUVs). Latest efforts concern the modeling and simulation of UUVs’ collaboration in swarm formations, towards obtaining deeper insights related to the critical issues of cybersecurity and interoperability. The research topics, which are constantly emerging in this domain, are closely related to the communication, interoperability, and secure operation of UUVs, as well as to the volume, velocity, variety, and veracity of data transmitted in low bit-rate due to the medium, i.e., the water. 
  • 597
  • 09 Jan 2023
  • Page
  • of
  • 678
ScholarVision Creations