Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Kraft Lignin
After cellulose, lignin is the second most abundant biopolymer worldwide. Lignins are non-toxic and renewable, and hence may play an essential role during the change-over from a fossil-based to a bio-based economy. Lignin isolation from Kraft cooking is state of the art, the three state of the art processes are summarized and discussed, further the concept of sequerntial liquid lignin recovery is introduced.
  • 4.2K
  • 12 May 2021
Topic Review
Small and Medium Enterprises (SMEs) Performance
SMEs are one of the business entities that make a significant contribution to economic conditions in Indonesia. This is the reason why information about the condition and presence of SMEs is important data for the government as an indicator for Indonesia’s economic conditions, especially during the COVID-19 pandemic. 
  • 4.2K
  • 23 May 2022
Topic Review Peer Reviewed
Road Markings and Signs in Road Safety
Due to the dynamic nature and complexity of road traffic, road safety is one of the most demanding social challenges. Therefore, contemporary road safety strategies incorporate a multidisciplinary and comprehensive approaches to address this problem and improve the safety of each individual element, i.e., the human, vehicle, and road. Traffic control devices are an important part of road infrastructure, among which road markings and road signs play a significant role. In general, road markings and signs represent basic means of communication between the road authorities and road users and, as such, provide road users with necessary information about the rules, warnings, obligations, and other information related to the upcoming situations and road alignment. The aim of this entry is to briefly present the main functions and characteristics of road markings and signs, and their role in road safety. In addition, practical issues and future trends and directions regarding road markings and signs are discussed. 
  • 4.2K
  • 21 Oct 2022
Topic Review
Integrated On-Board Charger-Traction Systems
The Integrated On-board Charger (iOBC) is the innovative technique to design the on-board charging system in which the motor coil and traction inverter is used during charging as grid filter and active front-end power factor correction unit respectively. This technique helps to increase charging power density, reduce vehicle size and weight.
  • 4.2K
  • 17 Aug 2022
Topic Review
Magellan's Circumnavigation
In 1519, the Portuguese naval officer and explorer Ferdinand Magellan led a Spanish expedition to find a western route to the East Indies and reach the Moluccas or Spice Islands (in present day Indonesia) with a fleet known as the Armada de Molucca. After the death of Magellan in the Philippines in 1521 and following several other short-lived leaderships, Spanish navigator Juan Sebastián Elcano led the expedition to the Spice Islands and ultimately across the Indian Ocean and up the Atlantic ocean back to Spain, resulting in the first circumnavigation of the world in 1522. The expedition is therefore also known as the Magellan–Elcano circumnavigation. The goal of the expedition was to find a western route to the Moluccas (Spice Islands) and trade for spices. Magellan left Spain on 20 September 1519, sailed across the Atlantic, and discovered the strait that now bears his name, allowing him to pass through the southern tip of South America into the Pacific Ocean (which he named). The fleet performed the first ever crossing of the Pacific, stopping in what is today called the Philippines , and eventually reached the Moluccas, accomplishing its goal. A much-depleted crew finally returned to Spain on 6 September 1522. The fleet initially consisted of about 270 men and five ships: four carracks and one caravel. The expedition faced numerous hardships including mutinies, starvation, scurvy, storms, and hostile encounters with indigenous people. Magellan died in battle in the Philippine islands and was succeeded as captain-general by a series of officers, with Juan Sebastián Elcano leading the trip onward to Spain. He and seventeen other men in one ship (the Victoria) were the only ones to circumnavigate the globe. The expedition was funded mostly by King Charles I of Spain, with the hope that it would discover a profitable western route to the Moluccas, as the eastern route was controlled by Portugal under the Treaty of Tordesillas. Though the expedition did find a route, it was much longer and more arduous than expected, and was therefore not commercially useful. Nevertheless, the first circumnavigation has been regarded as a great achievement in seamanship, and had a significant impact on the European understanding of the world.
  • 4.2K
  • 16 Nov 2022
Topic Review
Stall (Fluid Mechanics)
In fluid dynamics, a stall is a reduction in the lift coefficient generated by a foil as angle of attack increases. This occurs when the critical angle of attack of the foil is exceeded. The critical angle of attack is typically about 15 degrees, but it may vary significantly depending on the fluid, foil, and Reynolds number. Stalls in fixed-wing flight are often experienced as a sudden reduction in lift as the pilot increases the wing's angle of attack and exceeds its critical angle of attack (which may be due to slowing down below stall speed in level flight). A stall does not mean that the engine(s) have stopped working, or that the aircraft has stopped moving—the effect is the same even in an unpowered glider aircraft. Vectored thrust in manned and unmanned aircraft is used to surpass the stall limit, thereby giving rise to post-stall technology. Because stalls are most commonly discussed in connection with aviation, this article discusses stalls as they relate mainly to aircraft, in particular fixed-wing aircraft. The principles of stall discussed here translate to foils in other fluids as well.
  • 4.2K
  • 16 Nov 2022
Topic Review
PC5-Based Cellular-V2X Evolution and Deployment
C-V2X (Cellular Vehicle-to-Everything) is a state-of-the-art wireless technology used in autonomous driving and intelligent transportation systems (ITS). 
  • 4.1K
  • 19 Feb 2021
Topic Review
Intermittent Energy Source
An intermittent energy source is any source of energy that is not continuously available for conversion into electricity and outside direct control because the used primary energy cannot be stored. Intermittent energy sources may be predictable but cannot be dispatched to meet the demand of an electric power system. The use of intermittent sources in an electric power system usually displaces storable primary energy that would otherwise be consumed by other power stations. Another option is to store electricity generated by non-dispatchable energy sources for later use when needed, e.g. in the form of pumped storage, compressed air or in batteries. A third option is the sector coupling e.g. by electric heating for district heating schemes. The use of small amounts of intermittent power has little effect on grid operations. Using larger amounts of intermittent power may require upgrades or even a redesign of the grid infrastructure.
  • 4.1K
  • 26 Oct 2022
Topic Review
Hydrothermal Liquefaction of Biomass
Hydrothermal liquefaction is a high-temperature high-pressure thermochemical conversion method adapted to convert high-water content biomass feedstocks to biofuels and many other valuable industrial chemicals. The hydrothermal process is broadly classified into carbonization, liquefaction, and gasification with hydrothermal liquefaction conducted in the intermediate temperature range of 250–374 °C and pressure of 4–25 MPa. Over the years, various solvents and co-solvents have been used as conversion mediums to promote easy decomposition of the lignocellulosic components in biomass. To obtain the final products, the product separation process typically involves multiple extraction and evaporation steps, which greatly depend on the type of extractive solvents and process parameters. In general, the main aim of the hydrothermal process is to produce a primary product, such as bio-oil, biochar, gases, or industrial chemicals, such as adhesives, benzene, toluene, and xylene.
  • 4.1K
  • 19 Aug 2021
Topic Review
Broadcasting of Sports Events
The broadcasting of sports events (also known as a sportscast) is the live coverage of sports as a television program, on radio, and other broadcasting media. It usually involves one or more sports commentators describing events as they happen.
  • 4.1K
  • 01 Dec 2022
  • Page
  • of
  • 678
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback