Topic Review
Carbon Nanotube Field-Effect Transistor
Carbon nanotubes (CNTs) are seamless nanotubes made of single or multiple layers of graphene sheets rolled around a central axis with the advantages of being lightweight and having a perfect hexagonal connection structure.
  • 2.8K
  • 29 Mar 2021
Topic Review
Step-Down Partial Power DC-DC Converters
Photovoltaic (PV) systems made-up by two-stages of energy conversion are attractive from the operation point view. It is because the MPPT range is extended, due to the voltage decoupling between the PV system and the dc-link. Nevertheless, the additional conversion stage increases the volume, cost and power converter losses. Therefore, in large-scale PV systems formed by series connection of PV modules, most of commercial inverters are based on a single-stage system. The concept of partial power converters (PPC), previously implemented as a step-up stage, has not fully covered all PV applications. In this work, a PPC performing step-down operation is proposed and analyzed for a PV string application. This concept is actually interesting from the industry point of view, since with the new isolation standards of PV modules reaching 1500V, larger strings are currently starting to become popular. Since grid connection remains below 690V, larger strings impose more demanding operation for single-stage central inverters (required to operate at lower modulation indexes and demand higher blocking voltage devices). 
  • 2.8K
  • 01 Nov 2020
Topic Review
Artificial Intelligence-Based Decision Support Systems in Project Sustainability
Decision support systems (DSS) is a computer-based aid, which is designed to assist project managers in decision making when the tasks at hand are of a complex nature. Artificial intelligence (AI) is “the theory and development of computer systems able to perform tasks normally requiring human intelligence, such as visual perception, speech recognition, decision-making, and translation between languages”. The use of artificial intelligence (AI)-based decision support systems (DSS) has been gaining in popularity. AI technologies are becoming powerful tools throughout the world for improving project management; however, the advancement of construction management is still in its infancy and is adapting to the use of AI at a much slower pace than other sectors
  • 2.8K
  • 15 Aug 2022
Topic Review
Applications of Quartz Crystal Microbalance
Quartz Crystal Microbalance (QCM) is one of the many acoustic transducers. It is the most popular and widely used acoustic transducer for sensor applications. It has found wide applications in chemical and biosensing fields owing to its high sensitivity, robustness, small sized-design, and ease of integration with electronic measurement systems.
  • 2.8K
  • 18 Jan 2022
Topic Review
Blood Pressure Sensors
In our unique transdisciplinary approach, we studied the fundamentals of blood pressure and examined its measuring modalities while focusing on their clinical use and sensing principles to identify material functionalities. Then, we carefully reviewed various categories of functional materials utilized in sensor building blocks allowing for comparative analysis of the performance of a wide range of materials throughout the sensor operational-life cycle. Not only this provides essential data to enhance the materials’ properties and optimize their performance, but also, it highlights new perspectives and provides suggestions to develop the next generation pressure sensors for clinical use.
  • 2.8K
  • 10 Apr 2021
Topic Review
Applications of Substrate-Integrated Waveguide
Substrate-integrated waveguide (SIW) is a modern day (21st century) transmission line that has recently been developed. This technology has introduced new possibilities to the design of efficient circuits and components operating in the radio frequency (RF) and microwave frequency spectrum. Microstrip components are very good for low frequency applications but are ineffective at extreme frequencies, and involve rigorous fabrication concessions in the implementation of RF, microwave, and millimeter-wave components. This is due to wavelengths being short at higher frequencies. Waveguide devices, on the other hand, are ideal for higher frequency systems, but are very costly, hard to fabricate, and challenging to integrate with planar components in the neighborhood. SIW connects the gap that existed between conventional air-filled rectangular waveguide and planar transmission line technologies including the microstrip.
  • 2.8K
  • 13 Apr 2022
Topic Review
Driving Mechanisms/Motion of Screw Drive
In recent years, interest in in-pipe robot research has been steadily increasing. This phenomenon reflects the necessity and urgency of pipe inspection and rehabilitation as several pipe networks have become outdated around the globe. In-pipe robots can be divided into several groups in accordance with their locomotion principles, each with its own advantages and best suited application scope. Research on the screw drive in-pipe robot (SDIR) has had a rising trend due to the robot’s simple driving mechanism design and numerous advantages. 
  • 2.8K
  • 09 Nov 2020
Topic Review
Virtual Power Plants
Due to the rapid growth in power consumption of domestic and industrial appliances, distributed energy generation units face difficulties in supplying power efficiently. The integration of distributed energy resources (DERs) and energy storage systems (ESSs) provides a solution to these problems using appropriate management schemes to achieve optimal operation. Furthermore, to lessen the uncertainties of distributed energy management systems, a decentralized energy management system named virtual power plant (VPP) plays a significant role.
  • 2.8K
  • 18 Dec 2020
Topic Review
Metal Sulfide Precipitation
Metal sulfide precipitation can efficiently recover several metals and metalloids from different aqueous sources, including wastewaters and hydrometallurgical solutions. 
  • 2.8K
  • 04 Jan 2022
Topic Review
Cup Lump Natural Rubber
Cup lump is obtained when fresh latex is extracted by tapping into a long cut made in a rubber tree and letting the drips pour into a plastic cup.
  • 2.8K
  • 05 May 2023
  • Page
  • of
  • 649
Video Production Service