Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Critical Heat Flux Amelioration
Critical heat flux (CHF) is the thermal limit of a phase change phenomenon where boiling occurs during heating, which suddenly decreases the efficiency of heat transfer. Ameliorating CHF by altering the boiling surface characteristics can lead to more efficiency, safety, and reliability of the system.
  • 3.0K
  • 11 Aug 2020
Topic Review
Preparation of Nanofluids
There are two different ways of preparing nanofluids categorized in a one-step process and a two-step process. The origin of the word “nanofluid” is connected with the work by Choi et al. back in 1995, where they researched enhancement of thermal conductivity of fluids mixed with nanoparticles, determined the direction of further research, described the theoretical study of these fluids, and set potential benefits of nanofluids. From that point, the number of scientific papers that deal with nanofluids has been exponentially increasing. 
  • 3.0K
  • 22 Nov 2021
Topic Review
Water Extraction from the Atmosphere for Arid Zones
The air may be used as a sustainable water supply because it contains over 14,000 km3 of water vapor. There are two methods for extracting water from ambient air. The first approach entails lowering the temperature of humid ambient air to below the dew point. The second method entails sucking water vapor from moist ambient air with a solid adsorbent and a liquid absorbent and then retrieving the water by heating the absorbent and liquefying the evaporated water. Dew water appears to be an easy way to supplement drinking water supplies in a few parts of the world. Small animals and plants are the primary consumers of dew water, as it is necessary for maintaining their activities in a semiarid or dry environment. 
  • 3.0K
  • 12 Jan 2022
Topic Review
LD-Steelmaking
Basic Oxygen Furnace (BOF) steelmaking is, worldwide, the most frequently applied process. According to the world steel organization statistical report, 2021, it saw a total production share of 73.2%, or 1371.2 million tons per year of the world steel production in 2020. The rest is produced in Electric Arc Furnace (EAF)-based steel mills (26.3%), and only a very few open-hearth and induction furnace-based steel mills. The BOF technology remains the leading technology applied based on its undoubted advantages in productivity and liquid steel composition control. The BOF technology started as the LD process 70 years ago, with the first heat applied in November 1952 in a steel mill in Linz, Austria. The name LD was formed from the first letters of the two sites with the first industrial scale plants, Linz and Donawitz, both in Austria. The history and development of the process have been honored in multiple anniversary publications over the last few decades. Nevertheless, the focus of the steel industry worldwide is significantly changing following a social and political trend and the requirement for fossil-free energy generation and industrial production to be in accordance with the world climate targets committed to in relation to the decades leading up to 2050.
  • 3.0K
  • 09 Jun 2022
Topic Review
Introduction to Nanofluids
Due to the combination of thermal engineering and the rapid rise of nanotechnology research over the past two decades, novel heat transfer fluids known as “nanofluids” have emerged. A “nanofluid” is a heat transfer fluid that has 1–100 nm-sized “nanoparticles”, which are suspended nanoparticles, scattered throughout the base fluid. To increase the stability of the working fluid, it is crucial to make sure the nanoparticle size is smaller than 100 nm. Water, oils, organic liquids (such as tri-ethylene-glycols, ethylene and refrigerants) and bio-fluids polymeric solutions are the most often utilized base fluids. Numerous studies throughout the years have documented diverse nanofluid preparation methods with various nanoparticle types and their heat transfer capabilities, in addition to advancing the information about nanofluids.
  • 3.0K
  • 13 Dec 2022
Topic Review
Microgrid and Its Architecture
The world today is plagued with problems of increased transmission and distribution (T&D) losses leading to poor reliability due to power outages and an increase in the expenditure on electrical infrastructure. To address these concerns, technology has evolved to enable the integration of renewable energy sources (RESs) like solar, wind, diesel and biomass energy into small scale self-governing power system zones which are known as micro-grids (MGs). A de-centralised approach for modern power grid systems has led to an increased focus on distributed energy resources and demand response. MGs act as complete power system units albeit on a small scale. However, this does not prevent them from large operational sophistication allowing their independent functioning in both grid-connected and stand-alone modes. MGs provide greater reliability as compared to the entire system owing to the large amount of information secured from the bulk system. They comprise numerous sources like solar, wind, diesel along with storage devices and converters. Several modeling schemes have been devised to reduce the handling burden of large scale systems. 
  • 3.0K
  • 18 Jan 2022
Topic Review
9K111 Fagot
The 9K111 Fagot (Russian: Фагот; "bassoon") is a second-generation tube-launched SACLOS wire-guided anti-tank missile system of the Soviet Union for use from ground or vehicle mounts. The 9K111 Fagot missile system was developed by the Tula KBP Design Bureau for Instrument Building. "9M111" is the GRAU designation of the missile. Its NATO reporting name is AT-4 Spigot.
  • 3.0K
  • 21 Oct 2022
Topic Review Peer Reviewed
Techno-Economic Analysis of State-of-the-Art Carbon Capture Technologies and Their Applications: Scient Metric Review
Carbon dioxide (CO2) emissions are a serious hazard to human life and the ecosystem. This is the reason that many measures have been put in place by the International Energy Agency (IEA) to reduce the anthropogenic-derived CO2 concentration in the atmosphere. Today, the potential of renewable energy sources has led to an increased interest in investment in carbon capture and storage technologies worldwide. The aim of this paper is to investigate state-of-the-art carbon capture and storage (CCS) technologies and their derivations for the identification of effective methods during the implementation of evidence-based energy policies. To this extent, this study reviews the current methods in three concepts: post-combustion; pre-combustion; and oxy-fuel combustion processes. The objective of this study is to explore the knowledge gap in recent carbon capture methods and provide a comparison between the most influential methods with high potential to aid in carbon capture. The study presents the importance of using all available technologies during the post-combustion process. To accomplish this, an ontological approach was adopted to analyze the feasibility of the CCS technologies available on the market. The study findings demonstrate that priority should be given to the applicability of certain methods for both industrial and domestic applications. On the contrary, the study also suggests that using the post-combustion method has the greatest potential, whereas other studies recommend the efficiency of the oxy-fuel process. Furthermore, the study findings also highlight the importance of using life cycle assessment (LCA) methods for the implementation of carbon capture technologies in buildings. This study contributes to the energy policy design related to carbon capture technologies in buildings.
  • 3.0K
  • 16 Oct 2023
Topic Review
Aero L-159 Alca
The Aero L-159 ALCA[nb 1] is a subsonic light combat aircraft and advanced trainer developed in the single-seat L-159A and two-seat L-159B versions respectively, produced in the Czech Republic by Aero Vodochody. In 2003, the Czech Air Force fleet of 72 L-159A aircraft was reduced to 24 due to budget constraints. After several years of storage, the government has re-sold most of the redundant aircraft to both military and civilian operators, namely the Iraqi Air Force and Draken International. The L-159 has seen active combat use by the Iraqi Air Force against ISIS. In Draken's service, the L-159 (colloquially known as "Honey Badger") has been employed as an aggressor aircraft. Since 2007, six L-159A aircraft have been rebuilt into T1 trainer derivatives. In 2017, Aero Vodochody unveiled a newly built L-159T1 for the Iraqi Air Force while the Czech Air Force is set to acquire L-159T2 two-seaters.
  • 3.0K
  • 29 Nov 2022
Topic Review
Medical Robots
The combination of artificial intelligence technology and medical science has inspired the emergence of medical robots with novel functions that use new materials and have a neoteric appearance. 
  • 3.0K
  • 02 Jun 2021
  • Page
  • of
  • 649
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback