Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Twin-Screw Granulation
Twin-screw granulation (TSG) is a pharmaceutical process that has gained increased interest from the pharmaceutical industry for its potential for the development of oral dosage forms. The technology has evolved rapidly due to the flexibility of the equipment design, the selection of the process variables and the wide range of processed materials. Most importantly, TSG offers the benefits of both batch and continuous manufacturing for pharmaceutical products, accompanied by excellent process control, high product quality which can be achieved through the implementation of Quality by Design (QbD) approaches and the integration of Process Analytical Tools (PAT). 
  • 3.7K
  • 18 May 2021
Topic Review
Visible Light Communication
Visible Light Communication (VLC) technology is an emerging technology using visible light modulation that, in the modern world, will mainly facilitate high-speed internet connectivity. VLC technology employs visible light for communication to facilitate high-speed internet connectivity exclusively in the indoor environment. This particular report will tell about some potential applications of VLC and the implementation of LEDs and some of the factors affecting the modulation bandwidth of LEDs for the VLC application.
  • 3.7K
  • 11 Nov 2020
Topic Review
Rotor Eccentricity
The rotor eccentricity is idealized as static eccentricity (SE), dynamic eccentricity (DE), or mixed eccentricity (ME), as shown in. The SE indicates that the rotor and the stator centers do not coincide, and the rotor revolves the rotor center. The DE indicates that the rotor and the stator centers do not coincide, and the rotor revolves both the stator and the rotor centers.
  • 3.7K
  • 03 Aug 2021
Topic Review
Mercedes-Benz W108
The Mercedes-Benz W108 and W109 are luxury cars produced by Mercedes-Benz from 1965 through to 1972 and 1973 in North America only. The line was an update of the predecessor W111 and W112 fintail sedans. The cars were successful in West Germany and in export markets including North America and Southeast Asia. During the seven-year run, a total of 383,361 units were manufactured.
  • 3.7K
  • 19 Oct 2022
Topic Review
Intelligent Tutoring System
An intelligent tutoring system (ITS) is a computer system that aims to provide immediate and customized instruction or feedback to learners, usually without requiring intervention from a human teacher. ITSs have the common goal of enabling learning in a meaningful and effective manner by using a variety of computing technologies. There are many examples of ITSs being used in both formal education and professional settings in which they have demonstrated their capabilities and limitations. There is a close relationship between intelligent tutoring, cognitive learning theories and design; and there is ongoing research to improve the effectiveness of ITS. An ITS typically aims to replicate the demonstrated benefits of one-to-one, personalized tutoring, in contexts where students would otherwise have access to one-to-many instruction from a single teacher (e.g., classroom lectures), or no teacher at all (e.g., online homework). ITSs are often designed with the goal of providing access to high quality education to each and every student.
  • 3.7K
  • 10 Oct 2022
Topic Review
Dhunge Dhara
A dhunge dhara (Nepali:ढुङ्गे धारा Listen (help·info)) or hiti (Newari) is a traditional stone drinking fountain found in Nepal. It is an intricately carved stone waterway through which water flows uninterrupted from underground sources. Dhunge dharas are part of a comprehensive drinking water supply system, commissioned by various rulers of Ancient and Medieval Nepal. The system is supported by numerous ponds and canals that form an elaborate network of water bodies, created as a water resource during the dry season and to help alleviate the water pressure caused by the monsoon rains. After the introduction of modern, piped water systems, starting in the late 19th century, this old system has fallen into disrepair and some parts of it are lost forever. Nevertheless, many people of Nepal still rely on the old hitis on a daily basis.
  • 3.6K
  • 21 Oct 2022
Topic Review
List of ASTM International Standards (F)
This is a list of ASTM International standards for "Materials for Specific Applications".
  • 3.6K
  • 24 Nov 2022
Topic Review
Bitching Betty
Bitching Betty is a slang term used by some pilots and aircrew (mainly North American), when referring to the voices used by some aircraft warning systems. The enunciating voice, in at least some aircraft systems, may be either male or female and in some cases this may be selected according to pilot preference. If the voice is female, it may be referred to as Bitching Betty; if the voice is male, it may be referred to as Barking Bob. A female voice is heard on military aircraft such as the F-16 Fighting Falcon, the Eurofighter Typhoon and the Mikoyan MiG-29. A male voice is heard on Boeing commercial airliners and is also used in the BAE Hawk. In the United Kingdom the term Nagging Nora is sometimes used, and in New Zealand the term used for Boeing aircraft is Hank the Yank. The voice warning system used on London Underground trains, which also uses a female voice, is known to some staff as Sonya, as it "gets on ya nerves".
  • 3.6K
  • 11 Oct 2022
Topic Review
Catalyst Design via Colloidal Synthesis
Supported nanoparticles are commonly applied in heterogeneous catalysis. The catalytic performance of these solid catalysts is, for a given support, dependent on the nanoparticle size, shape, and composition, thus necessitating synthesis techniques that allow for preparing these materials with fine control over those properties. Such control can be exploited to deconvolute their effects on the catalyst’s performance, which is the basis for knowledge-driven catalyst design. In this regard, bottom-up synthesis procedures based on colloidal chemistry have proven successful in achieving the desired level of control for a variety of fundamental studies. This article aims to give an overview of recent progress made in this synthesis technique for the application of controlled catalytic materials in gas-phase catalysis. The focus goes to mono- and bimetallic materials, as well as to recent efforts in enhancing their performance by embedding colloidal templates in porous oxide phases.
  • 3.6K
  • 12 May 2021
Topic Review
Preconsolidation Pressure
Preconsolidation pressure is the maximum effective vertical overburden stress that a particular soil sample has sustained in the past. This quantity is important in geotechnical engineering, particularly for finding the expected settlement of foundations and embankments. Alternative names for the preconsolidation pressure are preconsolidation stress, pre-compression stress, pre-compaction stress, and preload stress. A soil is called overconsolidated if the current effective stress acting on the soil is less than the historical maximum. The preconsolidation pressure can help determine the largest overburden pressure that can be exerted on a soil without irrecoverable volume change. This type of volume change is important for understanding shrinkage behavior, crack and structure formation and resistance to shearing stresses. Previous stresses and other changes in a soil's history are preserved within the soil's structure. If a soil is loaded beyond this point the soil is unable to sustain the increased load and the structure will break down. This breakdown can cause a number of different things depending on the type of soil and its geologic history. Preconsolidation pressure cannot be measured directly, but can be estimated using a number of different strategies. Samples taken from the field are subjected to a variety of tests, like the constant rate of strain test (CRS) or the incremental loading test (IL). These tests can be costly due to expensive equipment and the long period of time they require. Each sample must be undisturbed and can only undergo one test with satisfactory results. It is important to execute these tests precisely to ensure an accurate resulting plot. There are various methods for determining the preconsolidation pressure from lab data. The data is usually arranged on a semilog plot of the effective stress (frequently represented as σ'vc) versus the void ratio. This graph is commonly called the e log p curve or the consolidation curve.
  • 3.6K
  • 17 Oct 2022
  • Page
  • of
  • 649
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback