Topic Review
Derringer
A derringer is a small handgun that is neither a revolver nor a semi/fully automatic pistol. It is not to be confused with mini-revolvers or pocket pistols, although some later derringers were manufactured with the pepperbox configuration. The modern derringer is often multi-barreled, and is generally the smallest usable handgun of any given caliber and barrel length due to the lack of a moving action, which takes up more space behind the barrel. It is frequently used by women because it is easily concealable in a purse or a stocking. The original Philadelphia Deringer was a muzzleloading caplock single-shot pistol introduced in 1825 by Henry Deringer. In total, approximately 15,000 Deringer pistols were manufactured. All were single barrel pistols with back-action percussion locks, typically .41 caliber with rifled bores, and walnut stocks. Barrel length varied from 1.5 to 6 in (38 to 152 mm), and the hardware was commonly a copper-nickel alloy known as "German silver". The term "derringer" (/ˈdɛrɪndʒər/) became a genericized misspelling during the reporting of the Lincoln assassination, which was committed with a concealed Philadelphia Deringer. Many copies of the original Philadelphia Deringer pistol were made by other gunmakers worldwide, and the name remained often misspelled; this misspelling soon became an alternative generic term for any pocket pistol, along with the generic phrase "palm pistol'", which Deringer's competitors invented and used in their advertising. With the advent of metallic cartridges, pistols produced in the modern form are still commonly called "derringers".
  • 5.0K
  • 01 Nov 2022
Topic Review
Lithium-Ion Battery Fire Suppression
Lithium-ion Batteries (LiBs) hazards, techniques for mitigating risks, the suppression of LiB fires and identification of shortcomings for future improvement were thoroughly reviewed. Water is identified as an efficient cooling and suppressing agent and water mist is considered the most promising technique to extinguish LiBs fire. 
  • 5.0K
  • 29 Apr 2021
Topic Review
Mopar Automatic Transmission Fluid
Mopar branded automatic transmission fluids (ATF) have been available for use in Chrysler fully automatic transmissions since 1953. Other Mopar branded fluids for their Fluid Drive semi-automatic transmissions were available as early as 1938. Chrysler used General Motors (GM) automatic transmission fluid specifications from 1952 through 1966 and marketed them under the Mopar brand name. In 1966, Chrysler began releasing their own automatic transmission fluid specifications. Chrysler licenses their ATF specifications to companies which manufacture the fluid and sell it under their own brand names. Not all Chrysler fluids are licensed for reselling under another brand name. All licensed Chrysler fluids must have a license number on the container. If no license number is found, the fluid may not be Chrysler approved and the fluid cannot be guaranteed to meet Chrysler specifications. Chrysler, like many automobile manufacturers, uses transmissions sourced from other suppliers or transmission manufacturers around the world; these transmissions are not manufactured by Chrysler. Many of these automatic transmissions use unique fluids that might not be shown on this page.
  • 5.0K
  • 07 Nov 2022
Topic Review
Xian JH-7
The Xian JH-7 (Jianjiji Hongzhaji – fighter-bomber; NATO reporting name Flounder), also known as the FBC-1 (Fighter/Bomber China-1) Flying Leopard, is a tandem two-seat, twin-engine fighter-bomber in service with the People's Liberation Army Naval Air Force (PLANAF), and the People's Liberation Army Air Force (PLAAF). The main contractors are Xi'an Aircraft Industrial Corporation (XAC) and the 603rd Aircraft Design Institute (later named the First Aircraft Institute of AVIC-I). The first JH-7s were delivered to the PLANAF in the mid-1990s for evaluation, with the improved JH-7A entering service in 2004.
  • 5.0K
  • 22 Nov 2022
Topic Review
E-learning (Theory)
E-learning theory describes the cognitive science principles of effective multimedia learning using electronic educational technology.
  • 4.9K
  • 25 Nov 2022
Topic Review
Bias Temperature Instability of MOSFETs
CMOS technology dominates the semiconductor industry, and the reliability of MOSFETs is a key issue. Negative bias temperature instability (NBTI) and positive bias temperature instability (PBTI) mainly degrade the performance of pMOSFETs and nMOSFETs, respectively. 
  • 4.9K
  • 13 May 2022
Topic Review
FN Baby Browning
The 1931 Fabrique Nationale ("FN") Baby Browning Pistol is a small blowback-operated semi-automatic pistol designed by Belgium-born Dieudonné Saive chambered in .25 ACP (6,35mm). The pistol features a six-round magazine capacity and is a striker-fired, single action, blow back mechanism. The manual thumb operated safety locks the slide in the closed position when engaged using side thumb pressure.
  • 4.9K
  • 14 Oct 2022
Topic Review
Olefins Production via Steam Cracking:Effect of Operating Parameters
Various parameters need to be considered to optimize a pyrolysis reactor for the production of ethylene and propylene. These parameters are included temperature, residence time, steam-to-hydrocarbon ratio, and feedstock composition. A higher reaction temperature results in a higher yield of ethylene, a shorter residence time, and higher reaction velocities. A low operating pressure is preferred for this process because of the gas phase reaction inside the reactor tubes and the production of more gaseous molecules for its reactions to the right. The reactor pressure must be kept as low as possible (between 170 and 250 kPa). The gas pressure in the reactor tube outlet is indirectly adjusted by the suction process gas pressure of the compressor in the compression section, downstream of the process. As mentioned earlier, to reach lower hydrocarbon pressures, process steam is co-fed with the hydrocarbon feed to reduce the hydrocarbon partial pressure and lower coke deposition. The addition of steam decreases the partial pressure of the hydrocarbon feed and favors the formation of primary products.
  • 4.9K
  • 16 Dec 2021
Topic Review
Building Restoration
Building Restoration describes a particular treatment approach and philosophy within the field of architectural conservation and historic preservation. It emphasizes the preservation of structures such as historic sites, houses, monuments, and other significant properties through careful maintenance and upkeep. Restoration aims to create accurate depictions of these locations and protect them against deterioration that could make them inaccessible or unrecognizable in the future.
  • 4.8K
  • 17 Oct 2022
Topic Review
Meaning and Determination of Electrode Surface Area
The interfacial contact area between an electronically conducting and an ionically conducting phase is the area where an electrode meets an electrolyte or an electrolyte solution. This area may differ significantly from the geometric, microscopic, real, or true surface area of the electronically conducting solid (the electrode) determined with a variety of experimental methods. This contact area may also differ from the electrochemically active surface area. These different surface or interface areas are relevant in electrochemical energy conversion and storage. They are not necessarily identical; there are even no simple relationships between them. This entry provides an overview of the various terms, briefly describes experimental methods for their determination and puts the data in perspective with respect to electrochemical energy conversion and storage.
  • 4.8K
  • 24 Feb 2023
  • Page
  • of
  • 649
Video Production Service