Topic Review
Microchip Implant (Animal)
A microchip implant is an identifying integrated circuit placed under the skin of an animal. The chip, about the size of a large grain of rice, uses passive radio-frequency identification (RFID) technology, and is also known as a PIT (passive integrated transponder) tag. Standard pet microchips are typically 11–13 mm long (approximately ​1⁄2 inch) and 2 mm in diameter. Externally attached microchips such as RFID ear tags are commonly used to identify farm and ranch animals, with the exception of horses. Some external microchips can be read with the same scanner used with implanted chips. Animal shelters, animal control officers and veterinarians routinely look for microchips to return lost pets quickly to their owners, avoiding expenses for housing, food, medical care, outplacing and euthanasia. Many shelters place chips in all outplaced animals. Microchips are also used by kennels, breeders, brokers, trainers, registries, rescue groups, humane societies, clinics, farms, stables, animal clubs and associations, researchers, and pet stores.
  • 1.4K
  • 12 Oct 2022
Topic Review
Bioethanol Production of Distillery Stillage
Distillery stillage has a high energy potential (13.6 MJ/kg TS, 10.4 MJ/kg COD), which indicates that it can be processed via anaerobic digestion and is a suitable substrate for conversion into energy.
  • 1.4K
  • 16 Nov 2021
Topic Review
Microgrid Operation Mode and Architectures
Energy security and the resilience of electricity networks have gained critical momentum as subjects of research. The challenges of meeting the increasing electrical energy demands and the decarbonisation efforts necessary to mitigate the effects of climate change have highlighted the importance of microgrids for the effective integration of renewable energy sources. Microgrids (MGs) can operate in grid-connected and islanded operation. MG architectures are categorised as alternating current microgrid (ACMG), direct current microgrid (DCMG) and hybrid microgrid (HMG).
  • 1.4K
  • 31 Jan 2023
Topic Review
Stationary Fuel Cell System
Fuel cell technologies have several applications in stationary power production, such as units for primary power generation, grid stabilization, systems adopted to generate backup power, and combined-heat-and-power configurations (CHP). The main sectors where stationary fuel cells have been employed are (a) micro-CHP, (b) large stationary applications, (c) UPS, and IPS. The fuel cell size for stationary applications is strongly related to the power needed from the load. Since this sector ranges from simple backup systems to large facilities, the stationary fuel cell market includes few kWs and less (micro-generation) to larger sizes of MWs. The design parameters for the stationary fuel cell system differ for fuel cell technology (PEM, AFC, PAFC, MCFC, and SOFC), as well as the fuel type and supply.
  • 1.4K
  • 09 Oct 2021
Topic Review
Gravity Recovery and Climate Experiment
File:15 Years of Freshwater Trends Seen by GRACE.webm The Gravity Recovery and Climate Experiment (GRACE) was a joint mission of NASA and the German Aerospace Center. Twin satellites took detailed measurements of Earth's gravity field anomalies from its launch in March 2002 to the end of its science mission in October 2017. By measuring gravity anomalies, GRACE showed how mass is distributed around the planet and how it varies over time. Data from the GRACE satellites is an important tool for studying Earth's ocean, geology, and climate. GRACE was a collaborative endeavor involving the Center for Space Research at the University of Texas at Austin, NASA's Jet Propulsion Laboratory, the German Aerospace Center and Germany's National Research Center for Geosciences, Potsdam. The Jet Propulsion Laboratory was responsible for the overall mission management under the NASA ESSP (Earth System Science Pathfinder) program. The principal investigator is Byron Tapley of the University of Texas Center for Space Research, and the co-principal investigator is Christoph Reigber of the GeoForschungsZentrum (GFZ) Potsdam. The two GRACE satellites (GRACE-1 and GRACE-2) were launched from Plesetsk Cosmodrome, Russia, on a Rockot (SS-19 + Breeze upper stage) launch vehicle on 17 March 2002. The spacecraft were launched to an initial altitude of approximately 500 km at a near-polar inclination of 89°. During normal operations, the satellites were separated by 220 km along their orbit track. This system was able to gather global coverage every 30 days. GRACE far exceeded its 5-year design lifespan, operating for 15 years until the decommissioning of GRACE-2 on 27 October 2017. Its successor, GRACE-FO, was successfully launched on 22 May 2018.
  • 1.4K
  • 06 Oct 2022
Topic Review
Different Power Electronic Topologies of Ultra-Fast Charger
The ultra-fast charging of batteries is a major issue in electric mobility development globally. Research in the area of power electronics for electric vehicle charging applications is focused on new high-power chargers. These chargers will significantly increase the charging power of electric vehicles, which will reduce the charging time. Furthermore, electric vehicles can be deployed to achieve improved efficiency and high-quality power if vehicle to microgrid (V2µG) is applied. 
  • 1.4K
  • 10 Feb 2023
Topic Review
Kīla (Buddhism)
The kīla or phurba (Sanskrit Devanagari: कील; IAST: kīla; Tibetan: ཕུར་པ or ཕུར་བ, Wylie: phur ba, alternate transliterations and English orthographies: phurpa, phurbu, purbha, or phurpu) is a three-sided peg, stake, knife, or nail-like ritual implement traditionally associated with Indo-Tibetan Buddhism, Bön, and Indian Vedic traditions. The kīla is associated with the practice of the yidam (Sanskrit ishtadevata, Tibetan yidam) or meditational deity Vajrakīla (वज्रकील) or Vajrakīlaya (Tibetan Dorje Phurba).
  • 1.4K
  • 23 Nov 2022
Topic Review
Coastal Buffer Zones in Taiwan
The coastal buffer zone is the transition area between land and sea spaces, encompassing lagoons and intertidal zones. 
  • 1.4K
  • 08 Nov 2021
Topic Review
Perylene-Based Non-Fullerene Acceptors
Perylene has had a tremendous impact in the history of material research for the molecular semiconductors. Among numerous derivatives of this polyaromatic hydrocarbon, perylene diimide (PDI) represents a promising class of organic materials envisioned as non-fullerene acceptors (NFAs) for the practical organic photovoltaic (OPV) applications due to their enhanced photo- and thermal stability and remarkably high electron affinity, some of which realize band-like transport properties. The present review guides some of the representative achievements in the development of rationally designed PDI systems, highlighting synthetic methodologies based on bay-functionalization strategies for creating well-designed molecular nanostructures and structure-performance relationship of perylene-based small molecular acceptors (SMAs) for the photovoltaic outcomes.
  • 1.4K
  • 28 Oct 2020
Topic Review
O3b MEO
O3b MEO is a satellite constellation in Medium Earth orbit (MEO) designed to provide low-latency broadband connectivity to remote locations for mobile network operators and internet service providers, maritime, aviation, and government and defence. Originally O3b, the name was changed in September 2020 to more clearly distinguish these satellites from the forthcoming O3b mPOWER constellation. O3b stood for "other three billion", or the other three billion people at the time that did not have stable internet access. The constellation was initially built, owned and operated by O3b Networks, which became a wholly owned subsidiary of SES S.A. in 2016 and ownership and operation of the constellation passed to SES Networks, a division of SES. The O3b MEO constellation began offering service in March 2014.
  • 1.4K
  • 19 Oct 2022
  • Page
  • of
  • 650
ScholarVision Creations