Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Membrane Fabrication Using Recycled Waste
Polymeric membranes are generally manufactured using a variety of monomers/polymers, including polystyrene, polysulfone (PSF), polyether sulfone (PES), polyaniline, polyvinylidene fluoride (PVDF), and others. The industrial manufacturing of these chemical compounds causes significant greenhouse gas emissions. In addition, the application of these monomer/polymer compounds in daily necessities has been posing a massive burden for their post-utilization disposal. The emergence of waste and its recycling potential has attracted attention to its application in membrane fabrication. The utilization of recycled waste for fabricating the membranes can help in reducing the environmental impact by 2× amount (i.e., eliminate the use of polymer for membrane fabrication and its associated environmental impact and mitigating the effect of waste on the environment via its utilization), thus helping in maintaining environmental sustainability.
  • 534
  • 19 Feb 2024
Topic Review
Pharmaceuticals in Wastewater Treatment Plants
Pharmaceuticals (PRs) can be only partly metabolised during therapeutic use, resulting in the excretion and release of residual fractions into the sewer. Then, unchanged or in the form of metabolites or conjugates, PRs reach local municipal wastewater treatment plants (WWTPs). Indeed, most medications, designed to maintain their chemical structure during the course of the therapeutic treatment, may remain active in treatment facilities for a long time. Many studies have shown that most drugs are significantly recalcitrant, and conventional treatment solutions for wastewater (WW) are not designed to eliminate these compounds. Consequently, a consistent flow of pharmaceuticals and their metabolites reach the aquatic environment, disturbing the ecological balance of rivers, lakes and other habitats and polluting groundwater, surface water and drinking water.
  • 533
  • 10 Sep 2021
Topic Review
Hydrogels and Graphene Quantum Dots
The graphene quantum dot (GQD), unlike the other graphene derivatives, is known to have distinctive optical properties showing size and edge-dependent fluorescence properties
  • 533
  • 15 Oct 2021
Topic Review
Structural Changes of Hydroxylapatite during Plasma Spraying
Functional osseoconductive coatings based on hydroxylapatite (HAp) and applied preferentially by atmospheric plasma spraying to medical implant surfaces are a mainstay of modern implantology. During contact with the hot plasma jet, HAp particles melt incongruently and undergo complex dehydration and decomposition reactions that alter their phase composition and crystallographic symmetry, and thus, the physical and biological properties of the coatings. Surface analytical methods such as laser-Raman and nuclear magnetic resonance (NMR) spectroscopies are useful tools to assess the structural changes of HAp imposed by heat treatment during their flight along the hot plasma jet. 
  • 533
  • 11 Mar 2022
Topic Review
Paper-Based Humidity Sensors
Paper, especially nanopaper, is a very promising material for the development of low-cost flexible humidity sensors suitable for a wide range of applications.
  • 533
  • 12 Apr 2023
Topic Review
Incorporation of Cellulose-Based Aerogels into Textile Structures
Given their exceptional attributes, aerogels are viewed as a material with immense potential. Being a natural polymer, cellulose offers the advantage of being both replenishable and capable of breaking down naturally. Cellulose-derived aerogels encompass the replenish ability, biocompatible nature, and ability to degrade naturally inherent in cellulose, along with additional benefits like minimal weight, extensive porosity, and expansive specific surface area.
  • 533
  • 28 Dec 2023
Topic Review
Nanoimprint Lithography
Optical spectrometers and sensors have gained enormous importance in metrology and information technology, frequently involving the question of size, resolution, sensitivity, spectral range, efficiency, reliability, and cost. Nanomaterials and nanotechnological fabrication technologies have huge potential to enable an optimization between these demands, which in some cases are counteracting each other. This paper focuses on the visible and near infrared spectral range and on five types of optical sensors (optical spectrometers): classical grating-based miniaturized spectrometers, arrayed waveguide grating devices, static Fabry–Pérot (FP) filter arrays on sensor arrays, tunable microelectromechanical systems (MEMS) FP filter arrays, and MEMS tunable photonic crystal filters. The comparison between this selection of concepts concentrates on (i) linewidth and resolution, (ii) required space for a selected spectral range, (iii) efficiency in using available light, and (iv) potential of nanoimprint for cost reduction and yield increase. 
  • 532
  • 16 Mar 2021
Topic Review
Biopolymeric Materials as Nonviral Vectors
Bacterial transformation and gene transfection can be understood as being the results of introducing specific genetic material into cells, resulting in gene expression, and adding a new genetic trait to the host cell. Many studies have been carried out to investigate different types of lipids and cationic polymers as promising nonviral vectors for DNA transfer. The present study focused on the use of biopolymeric materials as nonviral vectors. The methodology was carried out based on searches of scientific articles and applications for patents published or deposited from 2006 to 2020 in different databases for patents (EPO, USPTO, and INPI) and articles (Scopus, Web of Science, and Scielo). The results showed that there are some deposits of patents regarding the use of chitosan as a gene carrier. The 16 analyzed articles allowed us to infer that the use of biopolymers as nonviral vectors is limited due to the low diversity of biopolymers used for these purposes. It was also observed that the use of different materials as nonviral vectors is based on chemical structure modifications of the material, mainly by the addition of cationic groups. Thus, the use of biopolymers as nonviral vectors is still limited to only a few polysaccharide types, emphasizing the need for further studies involving the use of different biopolymers in processes of gene transfer.
  • 532
  • 05 Apr 2021
Topic Review
Diabetes and Cancer
Cancer is considered the second leading cause of death worldwide and in 2018 it was responsible for approximately 9.6 million deaths. Globally, about one in six deaths are caused by cancer. A strong correlation was found between diabetes mellitus and carcinogenesis with the most evident correlation was with type 2 diabetes mellitus (T2DM). Research has proven that elevated blood glucose levels take part in cell proliferation and cancer cell progression.
  • 532
  • 23 Apr 2021
Topic Review
Blue Diamond
Blue diamond is a type of diamond which exhibits all of the same inherent properties of the mineral except with the additional element of blue color in the stone. They are colored blue by trace amounts of boron that contaminate the crystalline lattice structure. Blue diamonds belong to a subcategory of diamonds called fancy color diamonds, the generic name for diamonds that exhibit intense color. Blue diamonds range in grade from Flawless to Included, just as in the case of white diamonds.
  • 532
  • 04 Nov 2022
  • Page
  • of
  • 467
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback