Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Ammonium Nitrate Disasters
When heated, ammonium nitrate decomposes non-explosively into gases including oxygen; however, it can be induced to decompose explosively by detonation. Large stockpiles of the material can be a major fire risk due to their supporting oxidation, and may also detonate, as happened in the Texas City disaster of 1947, which led to major changes in the regulations for storage and handling. There are two major classes of incidents resulting in explosions: In the first case, the explosion happens by the mechanism of shock to detonation transition. The initiation happens by an explosive charge going off in the mass, by the detonation of a shell thrown into the mass, or by detonation of an explosive mixture in contact with the mass. The examples are Kriewald, Morgan, Oppau, Tessenderlo, and Traskwood. In the second case, the explosion results from a fire that spreads into the ammonium nitrate (AN) itself (Texas City, Brest, Tianjin), or to a mixture of an ammonium nitrate with a combustible material during the fire. The fire must be confined at least to a degree for successful transition from a fire to an explosion (a phenomenon known as "deflagration to detonation transition", or DDT). Pure, compact AN is stable and very difficult to initiate. However, there are numerous cases when even impure AN did not explode in a fire. Ammonium nitrate decomposes in temperatures above 210 °C (410 °F). Pure AN is stable and will stop decomposing once the heat source is removed, but when catalysts are present, the reaction can become self-sustaining (known as self-sustaining decomposition, or SSD). This is a well-known hazard with some types of NPK fertilizers and is responsible for the loss of several cargo ships.
  • 787
  • 28 Oct 2022
Topic Review
Oligothiophene-Naphthalimide Hybrids Synthetic Approaches
Different variables were tuned in a series of organic semiconductors synthesized in the group of José L. Segura, such as the planarity and the length of their π-conjugated backbones, the topology and energy levels of the frontier molecular orbitals (HOMO and LUMO) and their molecular dipole moments. Studies carried out in the group of Rocío Ponce-Ortiz show that the tuning of these properties can be connected with the microstructure properties observed by atomic force microscopy (AFM) and X-ray diffraction (XRD) in thin films as well as with the performances in organic field-effect transistors (OFETs).
  • 788
  • 11 Jun 2021
Topic Review
Bioactive Glasses in Bone Regeneration
Mesoporous bioactive glasses (MBGs) is a category of bioceramics that, as will be explained, can be considered intermediate between traditional bioactive glasses—obtained by quenching of a melt or by the sol-gel method—and silica mesoporous materials. These bioactive glasses can be considered a spin-off of silica mesoporous materials because they are designed with a similar technical approach. Mesoporous glasses in addition to SiO2 contain significant amounts of other oxides, particularly CaO and P2O5 and therefore, they exhibit quite different properties and clinical applications than mesoporous silica compounds. Both materials exhibit ordered mesoporous structures with a very narrow pore size distribution that are achieved by using surfactants during their synthesis. The characteristics of mesoporous glasses made them suitable to be enriched with various osteogenic agents, namely inorganic ions and biopeptides as well as mesenchymal cells. 
  • 788
  • 19 Apr 2022
Topic Review
Membranes Used as Separators in Microbial Fuel Cells
Microbial fuel cells (MFCs) are electrochemical devices focused on bioenergy generation and organic matter removal carried out by microorganisms under anoxic environments. In these types of systems, the anodic oxidation reaction is catalyzed by anaerobic microorganisms, while the cathodic reduction reaction can be carried out biotically or abiotically. Membranes as separators in MFCs are the primary requirements for optimal electrochemical and microbiological performance.
  • 787
  • 29 Nov 2021
Topic Review
Wind Energy based on Triboelectric Nanogenerators
The utilization of various distributed energy is becoming a prominent research topic due to the rapid development of the Internet of Things and wireless condition monitoring systems. Among the various distributed energy sources, wind energy has the advantages of being widely distributed, renewable and pollution-free, and is a very promising mechanical energy for power supply. Traditional wind energy harvesting methods based on electromagnetic and piezoelectric effects have issues with complex structure, large size, severe mechanical structures, and high installation costs. The low frequency and irregular nature of ambient mechanical energy makes these methods generally inefficient and inevitably hinders the further exploitation of wind energy. The triboelectric nanogenerators (TENGs) based on frictional charging and electrostatic effects can also be used for wind power generation and are increasingly favored by researchers as TENGs are easier to be miniaturized and assembled, and can realize large-scale manufacturing in comparison.
  • 787
  • 28 Sep 2022
Topic Review
Aggregation-Induced Emission Properties in Polymers
Aggregation-Induced Emission (AIE) is a phenomenon that consists of the appearance of fluorescence in solid state or aggregation greater than that of molecules in solution and has recently attracted the attention of the scientific community because of their potential applications in different fields. Compared to small molecules, little attention has been paid to polymers and oligomers that exhibit AIE, despite having excellent properties such as high emission efficiency in aggregate and solid states, signal amplification effect, good processability and the availability of multiple functionalization sites. In addition to these features, if the molecular structure is fully conjugated, intramolecular electronic interactions between the composing chromophores may appear, thus giving rise to a wealth of new photophysical properties. In this review, we focus on selected fully conjugated oligomers, dendrimers and polymers, and briefly summarize their synthetic routes, fluorescence properties and potential applications. An exhaustive comparison between spectroscopic results in solution and aggregates or in solid state has been collected in almost all examples, and an opinion on the future direction of the field is briefly stated.
  • 787
  • 02 Feb 2021
Topic Review
Methods for Protein Crystallization
Proteins are biopolymers consisting of amino acids linked by peptide bonds. A peptide bond is a type of amide bond that occurs during the formation of proteins and peptides as a result of the interaction of the α-amino group (-NH2) of one amino acid with the α-carboxyl group (-COOH) of another amino acid. The main method for determining the spatial structure of a protein is X-ray structural analysis of protein crystals. The main difficulty in applying this method is in obtaining a perfect protein-crystal. 
  • 786
  • 28 Jan 2023
Topic Review
Medical and Dental Applications of Titania Nanoparticles
Titanium oxide (TiO2) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO2 NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO2 NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).
  • 786
  • 02 Nov 2022
Topic Review
Bis-Chalcone-Based Photoinitiators of Polymerization
Over the past several decades, photopolymerization has become an active research field, and the ongoing efforts to develop new photoinitiating systems are supported by the different applications in which this polymerization technique is involved—including dentistry, 3D and 4D printing, adhesives, and laser writing.
  • 786
  • 23 Jun 2021
Topic Review
Gadolinium-Based Oxide and Oxysulfide Particles
Gadolinium-Based Oxide and Oxysulfide Particles in the biomedical field
  • 785
  • 14 Oct 2021
  • Page
  • of
  • 467
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback