Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Pentacene and Its Derivatives Deposition Methods
Pentacene is a well-known conjugated organic molecule with high mobility and a sensitive photo response. It is widely used in electronic devices, such as in organic thin-film transistors (OTFTs), organic light-emitting diodes (OLEDs), photodetectors, and smart sensors. With the development of flexible and wearable electronics, the deposition of good-quality pentacene films in large-scale organic electronics at the industrial level has drawn more research attention. Several methods are used to deposit pentacene thin films. The thermal evaporation technique is the most frequently used method for depositing thin films, as it has low contamination rates and a well-controlled deposition rate. Solution-processable methods such as spin coating, dip coating, and inkjet printing have also been widely studied because they enable large-scale deposition and low-cost fabrication of devices. 
  • 1.4K
  • 18 Apr 2022
Topic Review
Mid-infrared Ultrashort Pulse
Mid-infrared (MIR) ultrashort laser pulses, with wavebands ranging from 2 to 20 µm, have a wide range of applications in the fields of environmental monitoring, laser medicine, food quality control, strong-field physics, attosecond science, and some other aspects. There are various technologies for MIR ultrashort pulse generation towards different wavebands.
  • 1.4K
  • 01 Jun 2022
Topic Review
Solid Oxide Electrolysis Cells and SOFCs Components
Solid oxide electrolysis cells (SOECs) and solid oxide fuel cells (SOFCs) are the leading high-temperature devices to realize the global “Hydrogen Economy”. These devices are inherently multi-material (ceramic and cermets). They have multi-scale, multilayer configurations (a few microns to hundreds of microns) and different morphology (porosity and densification) requirements for each layer. Adjacent layers should exhibit chemical and thermal compatibility and high-temperature mechanical stability. 
  • 1.4K
  • 20 Oct 2022
Topic Review
Natural Convection
Convection is single or multiphase fluid flow that occurs spontaneously due to the combined effects of material property heterogeneity and body forces on a fluid, most commonly density and gravity (see buoyancy). When the cause of the convection is unspecified, convection due to the effects of thermal expansion and buoyancy can be assumed. Convection may also take place in soft solids or mixtures where particles can flow. Convective flow may be transient (such as when a multiphase mixture of oil and water separates) or steady state (see Convection cell). The convection may be due to gravitational, electromagnetic or fictitious body forces. Heat transfer by natural convection plays a role in the structure of Earth's atmosphere, its oceans, and its mantle. Discrete convective cells in the atmosphere can be identified by clouds, with stronger convection resulting in thunderstorms. Natural convection also plays a role in stellar physics. Convection is often categorised or described by the main effect causing the convective flow, e.g. Thermal convection. Convection cannot take place in most solids because neither bulk current flows nor significant diffusion of matter can take place.
  • 1.4K
  • 10 Oct 2022
Topic Review
Biaxial Tensile Test
Biaxial tensile test is a tensile testing in which the sample is stretched in two distinct directions. This technique is used to obtain the mechanical characteristics of anisotropic materials, such as composite materials, textiles, and soft biological tissues. There are three main types of biaxial tensile testing: Bursting test, based on a circular specimen clamped along the edge and inflated by air or water under pressure until the specimen bursts; Cylinder test, based on a hollow cylinder subjected to internal pressure and axial pressure or tension; Plane biaxial test, which offers the best result because of the independent force introduction in the two main directions.
  • 1.4K
  • 28 Oct 2022
Topic Review
Ion-selective Electrodes
An Ion-selective electrode (ISE) is a transducer (sensor) which converts the activity of a specific ion dissolved in a solution into an electrical potential which can be measured by a voltmeter or pH meter. The voltage is theoretically dependent on the logarithm of the ionic activity, according to the Nernst equation. The sensing part of the electrode is usually made as an ion-specific membrane, along with a reference electrode. Ion-selective electrodes are used in biochemical and biophysical research, where measurements of ionic concentration in an aqueous solution are required, usually on a real time basis.
  • 1.4K
  • 10 Oct 2022
Topic Review
Timoshenko Beam Theory
The Timoshenko beam theory was developed by Stephen Timoshenko early in the 20th century. The model takes into account shear deformation and rotational bending effects, making it suitable for describing the behaviour of thick beams, sandwich composite beams, or beams subject to high-frequency excitation when the wavelength approaches the thickness of the beam. The resulting equation is of 4th order but, unlike Euler–Bernoulli beam theory, there is also a second-order partial derivative present. Physically, taking into account the added mechanisms of deformation effectively lowers the stiffness of the beam, while the result is a larger deflection under a static load and lower predicted eigenfrequencies for a given set of boundary conditions. The latter effect is more noticeable for higher frequencies as the wavelength becomes shorter (in principle comparable to the height of the beam or shorter), and thus the distance between opposing shear forces decreases. If the shear modulus of the beam material approaches infinity—and thus the beam becomes rigid in shear—and if rotational inertia effects are neglected, Timoshenko beam theory converges towards ordinary beam theory.
  • 1.3K
  • 15 Nov 2022
Topic Review
Cosmogenic Activation
       The cosmogenic activation of materials is the production of radioactive isotopes due to the exposure to cosmic rays. On the Earth's surface, spallation induced by cosmic neutrons is responsible of most of the activation, but other reactions and cosmic ray components must be considered too in other conditions, like if materials are flown at high altitudes or stored deep underground.        Cosmogenic activation is relevant in different contexts; for example, together with primordial or anthropogenic radioactivity, it s a background source in experiments devoted to the investigation of rare event phenomena, like the direct detection of dark matter particles or the nuclear double beta decay. 
  • 1.3K
  • 26 Oct 2020
Topic Review
88 Modern Constellations
In contemporary astronomy, the sky is divided into 88 regions called constellations, generally based on the asterisms (which are also called "constellations") of Greek and Roman mythology. The number of 88, along with the contemporary scientific notion of "constellation", was conventioned in 1922 by the International Astronomical Union in order to establish a universal pattern for professional astronomers, who defined constellations from then on as regions of the sky separated by arcs of right ascensions and declinations and grouped by asterisms of their historically most important stars, which cover the entire celestial sphere. The constellations along the ecliptic are called the zodiac. The ancient Sumerians, and later the Greeks (as recorded by Ptolemy), established most of the northern constellations in international use today. When explorers mapped the stars of the southern skies, European and American astronomers proposed new constellations for that region, as well as ones to fill gaps between the traditional constellations. Not all of these proposals caught on, but in 1922, the International Astronomical Union (IAU) adopted the modern list of 88 constellations. After this, Eugène Joseph Delporte drew up precise boundaries for each constellation, so that every point in the sky belonged to exactly one constellation.
  • 1.3K
  • 08 Oct 2022
Topic Review
LSPR Gas Sensors
The localized surface plasmon resonance (LSPR) phenomenon is known to be responsible for the unique colour effects observed in the ancient Roman Lycurgus Cup and at the windows of the medieval cathedrals. In both cases, the optical effects result from the interaction of the visible light (scattering and absorption) with the conduction band electrons of noble metal nanoparticles (gold, silver, and gold–silver alloys). These nanoparticles are dispersed in a dielectric matrix with a relatively high refractive index in order to push the resonance to the visible spectral range. At the same time, they have to be located at the surface to make LSPR sensitive to changes in the local dielectric environment, the property that is very attractive for sensing applications.
  • 1.3K
  • 29 Jun 2021
  • Page
  • of
  • 118
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback