Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Most Viewed Latest Alphabetical (A-Z) Alphabetical (Z-A)
Filter:
All Topic Review Biography Peer Reviewed Entry Video Entry
Topic Review
SBA-15 synthesis variables
SBA-15 synthetized at different values of time and temperature of the hydrothermal treatment were mixture with tobacco in order to determine the capacity of reduction of toxic and carcirogenic compounds on tobacco smoke. The effect of temperature is not significative but time presents a remarked effect. And a parameter not frequently studied, the aparent density, has been shown the most relevant relation with the results on smoking experimentos. Finally, the effect of reduce the supernatant liquor also has been studied and the results have shown that the material properties remain practically unchanged.
  • 930
  • 01 Nov 2020
Topic Review
Bond standard test alternative procedures
Alternative procedure to the Bond standard test is based on determining the grindability of an unknown ore by comparing it to the grindability behaviour of a reference ore. It can be performed in any laboratory ball mill, but it requires a reference sample ore for which wi is known.
  • 925
  • 22 Jul 2021
Topic Review
Plate Heat Exchangers and Their Types of Construction
A plate heat exchanger (PHE) is a modern, effective type of heat transfer equipment capable of increasing heat recuperation and energy efficiency. For PHEs, enhanced methods of heat transfer intensification can be further applied using the analysis and knowledge already available in the literature.
  • 906
  • 19 Jul 2023
Topic Review
Embedded Sensors with 3D Printing Technology
Embedded sensors (ESs) are used in smart materials to enable continuous and permanent measurements of their structural integrity, while sensing technology involves developing sensors, sensory systems, or smart materials that monitor a wide range of properties of materials. Incorporating 3D-printed sensors into hosting structures has grown in popularity because of improved assembly processes, reduced system complexity, and lower fabrication costs. 3D-printed sensors can be embedded into structures and attached to surfaces through two methods: attaching to surfaces or embedding in 3D-printed sensors.
  • 891
  • 11 Jun 2024
Topic Review
Edge Computing in Manufacturing Industry
The primary goal of edge computing (EC) is to reduce the time required to transfer large amounts of data. With the ability to analyze data at the edge, it is possible to obtain immediate feedback and use it in the decision-making process. However, the implementation of EC requires investments not only in infrastructure, but also in the development of employee knowledge related to modern computing methods based on artificial intelligence. Future research in EC should particularly cover areas where actions require immediate decision making and the processing of big data, such as autonomous control of robots, vehicles, or entire factories. The second area of research should be technologies related to mobile edge computing, for example, telecommunications and all issues related to 5G technology.
  • 872
  • 11 Apr 2022
Topic Review
Smart Manufacturing and Tactile Internet Based on 5G
For many applications deployed in manufacturing networks, communication latency has been a significant barrier. Despite the constant development of improved communication protocols and standards during Industry 4.0, the latency problem persists, lowering quality of services (QoS) and quality of experience (QoE). Tactile internet (TI), with its high availability, security, and ultra-low latency, will add a new dimension to human-machine interaction (HMI) by enabling haptic and tactile sensations. The tactile internet (TI) is a cutting-edge technology that uses 5G and beyond (B5G) communications to enable real-time interaction of haptic data over the internet between tactile ends. This emerging TI technology is regarded as the next evolutionary step for the Internet of Things (IoT) and is expected to bring about massive changes towards Society 5.0 and to address complex issues in current society. To that end, the 5G mobile communication systems will support the TI at the wireless edge. As a result, TI can be used as a backbone for delay mitigation in conjunction with 5G networks, allowing for ultra-reliable low latency applications like Smart Manufacturing, virtual reality, and augmented reality. Consequently, the purpose of this paper is to present the current state of 5G and TI, as well as the challenges and future trends for 5G networks beyond 2021, as well as a conceptual framework for integrating 5G and TI into existing industrial case studies, with a focus on the design aspects and layers of TI, such as the master, network, and slave layers. Finally, the key publications focused on the key enabling technologies of TI are summarized and the beyond 5G era towards Society 5.0 based on cyber-physical systems is discussed.
  • 867
  • 29 Dec 2021
Topic Review
Journal Acoustics
Acoustics (ISSN 2624-599X) is a peer-reviewed, open access journal of acoustics science and engineering published quarterly online by MDPI. It is indexed by the Emerging Sources Citation Index (ESCI) in Web of Science. Manuscripts are peer-reviewed and a first decision provided to authors approximately 11.7 days after submission; acceptance to publication is undertaken in 2.9 days (median values for papers published in this journal in the second half of 2020).
  • 866
  • 26 Sep 2021
Topic Review
Enhancing the Decision-Making Process through Industry 4.0 Technologies
In order to meet the increasingly complex expectations of customers, many companies must increase efficiency and agility. In this sense, Industry 4.0 technologies offer significant opportunities for improving both operational and decision-making processes. These developments make it possible to consider an increase in the level of operational systems and teams’ autonomy. However, the potential for strengthening the decision-making process by means of these new technologies remains unclear in the current literature. To fill this gap, a Delphi study using the Régnier Abacus technique was conducted with a representative panel of 24 experts. The novelty of this study was to identify and characterize the potential for enhancing the overall decision-making process with the main Industry 4.0 groups of technologies. Our results show that cloud computing appears as a backbone to enhance the entire decision-making process. However, certain technologies, such as IoT and simulation, have a strong potential for only specific steps within the decision-making process. This research also provides a first vision of the manager’s perspectives, expectations, and risks associated with implementing new modes of decision-making and cyber-autonomy supported by Industry 4.0 technologies.
  • 859
  • 20 Jan 2022
Topic Review
I4.0, Servitisation, and Circular Economy
Industry 4.0 (I4.0) technologies have been highlighted in recent literature as enablers of servitisation. Simultaneously, businesses are advised to implement a circular economy (CE) to bring new opportunities. However, it is pertinent to mention that little attention has been given to assess the role of I4.0 in adopting the CE and servitisation in a fully integrated manner. This research fills this gap by developing a conceptual framework through a systematic literature review of 139 studies investigating the relationship between the I4.0, CE, and servitisation. This study identifies the impact of these variables on a firm’s operational and financial performance (revenue stream, growth, and profitability). Our research findings advocate that adopting I4.0 technologies to the business and manufacturing model enables sustainability, energy and resource efficiency while enhancing performance and offering innovative products through smart services. Thus, firms must systematically adopt I4.0 technologies to support a CE model that creates value through servitisation. This study identifies the research gaps that are unexplored for practitioners and future researchers while providing insight into the role of I4.0 in implementing CE in the servitisation business model.
  • 851
  • 23 Jun 2021
Topic Review
Order-Picking System
Companies have been trying continuously to reduce their logistics costs in the current competitive markets. Warehouses are important components of the logistics systems and they must be managed effectively and efficiently to reduce the production cost as well as maintain customer satisfaction. Order-picking is the core of warehouse operations and an order-picking system (OPS) is essential to meet customer needs and orders. Failure to perform the OPS process properly results in high costs and customer dissatisfaction. 
  • 845
  • 13 Dec 2021
Topic Review
Optimal Interpolation for infrared satellite data
Thermal infrared remote sensing measurements are blinded to surface emissions under cloudiness because infrared sensors cannot penetrate thick cloud layers. Therefore, surface and atmospheric parameters can be retrieved only in clear sky conditions giving origin to spatial fields flagged with missing pieces of information. Motivated by this we present a methodology to retrieve missing values of some interesting geophysical variables retrieved from spatially scattered infrared satellite observations in order to yield level 3 (L3), regularly gridded, data. The technique is based on a 2-Dimensional (2D) Optimal Interpolation (OI) scheme. The goodness of the approach has been tested on 15-min temporal resolution Spinning Enhanced Visible and Infrared Imager (SEVIRI) emissivity and surface temperature (ST) products over South Italy (land and sea), on Infrared Atmospheric Sounding Interferometer (IASI) atmospheric ammonia (NH3) concentration over North Italy and carbon monoxide (CO), sulfur dioxide (SO2) and NH3 concentrations over China. Sea surface temperature (SST) retrievals have been compared with gridded data from MODIS (Moderate-resolution Imaging Spectroradiometer) observations. For gases concentration, we have considered data from 3 different emission inventories, that is, Emissions Database for Global Atmospheric Research v3.4.2 (EDGARv3.4.2), the Regional Emission inventory in ASiav3.1 (REASv3.1) and MarcoPolov0.1, plus an independent study.
  • 845
  • 30 Oct 2020
Topic Review
Textile Development of Czech Republic
The textile branch includes mainly the processing of textile fibers, the production of yarns and various fabrics (fabrics, knitwear nonwovens and nano assmblies) and their use for clothing purposes and technical applications. This branch belonged, belongs and will probably continue to belong to fields using new technical solutions very quickly.The major factors involved in developement of textile branch are discussed.
  • 843
  • 28 Oct 2021
Topic Review
High-Voltage Film Capacitors
High-voltage capacitors are key components for circuit breakers and monitoring and protection devices, and are important elements used to improve the efficiency and reliability of the grid. Different technologies are used in high-voltage capacitor manufacturing process, and at all stages of this process polymeric films must be used, along with an encapsulating material, which can be either liquid, solid or gaseous.
  • 842
  • 24 Mar 2021
Topic Review
Waste-to-Energy Technologies for Slum/Informal Settlements in Nigeria
Slum/informal settlements are an integral part of a city, with a population projected to reach 3 billion by 2030. It is also expected that the rate of waste generation will more than triple by 2050 in the cities of low-income countries of sub-Saharan Africa. At this rate, the risk to the environment and health of inhabitants are enormous, because the current waste management practices are not guided by legislation on proper use and disposal.
  • 842
  • 21 Jun 2022
Topic Review
Technology Transfer in the Industry 4.0 Era
Modern innovative models have the possibility of transferring research and development (R&D) output through technology transfer from scientific and research institutions or other enterprises. The complex process of technology transfer is significantly dependent on cooperation among academia, industry, and governments in response to the technological developments driven together through Industry 4.0 (I4.0). As a result, numerous technology transfer factors must be addressed for I4.0 to become a reality. However, the abundance of literature on I4.0 and associated technologies, the key ingredients, and insights for effectively executing I4.0 technology transfer are fairly limited.
  • 841
  • 31 Jan 2023
Topic Review
Respirator Assigned Protection Factors
The respiratory protective devices (RPD) can protect workers only if their protective properties are adequate to the conditions in the workplace. Therefore, specialists have developed criteria for the selection of proper, adequate respirators, including the Assigned Protection Factors (APF) - the decrease of the concentration of harmful substances in the inhaled air, which (is expected) to be provided with timely and proper use of a certified respirator of certain types (design) by taught and trained workers (after individual selection with a tight-fitting mask and fit testing), when the employer performs an effective respiratory protective device programme.
  • 831
  • 25 Oct 2022
Topic Review
Mobile Augmented Reality Maintenance Assistant
The integration of exponential technologies in the traditional manufacturing processes constitutes a noteworthy trend of the past two decades, aiming to reshape the industrial environment. This kind of digital transformation, which is driven by the Industry 4.0 initiative, not only affects the individual manufacturing assets, but the involved human workforce, as well. Since human operators should be placed in the centre of this revolution, they ought to be endowed with onew tools and through-engineering solutions that improve their efficiency. In addition, vivid visualization techniques must be utilized, in order to support them during their daily operations in an auxiliary and comprehensive way. Towards this end, we describe a user-centered methodology, which utilizes augmented reality (AR) and computer vision (CV) techniques, supporting low-skilled operators in the maintenance procedures. The described mobile augmented reality maintenance assistant (MARMA) makes use of the handheld’s camera and locates the asset on the shop floor and generates AR maintenance instructions. 
  • 824
  • 01 Feb 2021
Topic Review
Live Cell Imaging
Live cell imaging is the study of living cells using time-lapse microscopy. It is used by scientists to obtain a better understanding of biological function through the study of cellular dynamics. Live cell imaging was pioneered in first decade of the 21th century. One of the first time-lapse microcinematographic films of cells ever made was made by Julius Ries, showing the fertilization and development of the sea urchin egg. Since then, several microscopy methods have been developed which allow researchers to study living cells in greater detail with less effort. A newer type of imaging utilizing quantum dots have been used as they are shown to be more stable. The development of holotomographic microscopy has disregarded phototoxicity and other staining-derived disadvantages by implementing digital staining based on cells’ refractive index.
  • 824
  • 27 Oct 2022
Topic Review
Snorkeling
Snorkeling (British and Commonwealth English spelling: snorkelling) is the practice of swimming on or through a body of water while equipped with a diving mask, a shaped breathing tube called a snorkel, and usually swimfins. In cooler waters, a wetsuit may also be worn. Use of this equipment allows the snorkeler to observe underwater attractions for extended periods with relatively little effort and to breathe while face-down at the surface. Snorkeling is a popular recreational activity, particularly at tropical resort locations. The primary appeal is the opportunity to observe underwater life in a natural setting without the complicated equipment and training required for scuba diving. It appeals to all ages because of how little effort there is, and without the exhaled bubbles of scuba-diving equipment. It is the basis of the two surface disciplines of the underwater sport of finswimming. Snorkeling is also used by scuba divers when on the surface, in underwater sports such as underwater hockey and underwater rugby, and as part of water-based searches conducted by search and rescue teams.
  • 820
  • 10 Oct 2022
Topic Review
Predictive Maintenance Solutions for SMEs
Small- and medium-sized enterprises (SMEs) play an important role in the economy of societies. Although environmental factors, such as COVID-19, as well as non-environmental factors, such as equipment failure, make these industries more vulnerable, they can be minimized by better understanding the concerns and threats these industries face. Only a few SMEs have the capacity to implement the innovative manufacturing technologies of Industry 4.0.
  • 812
  • 29 Oct 2021
  • Page
  • of
  • 15
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback