Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Most Viewed Latest Alphabetical (A-Z) Alphabetical (Z-A)
Filter:
All Topic Review Biography Peer Reviewed Entry Video Entry
Topic Review
Algal Food and Its Application in Food Industry
With the rapid development of the economy and productivity, an increasing number of citizens are not only concerned about the nutritional value of algae as a potential new food resource but are also, in particular, paying more attention to the safety of its consumption. Many studies and reports pointed out that analyzing and solving seaweed food safety issues requires holistic and systematic consideration. The three main factors that have been found to affect the food safety of algal are physical, chemical, and microbiological hazards. At the same time, although food safety awareness among food producers and consumers has increased, foodborne diseases caused by algal food safety incidents occur frequently. It threatens the health and lives of consumers and may cause irreversible harm if treatment is not done promptly. A series of studies have also proved the idea that microbial contamination of algae is the main cause of this problem. Therefore, the rapid and efficient detection of toxic and pathogenic microbial contamination in algal products is an urgent issue that needs to be addressed. At the same time, two other factors, such as physical and chemical hazards, cannot be ignored. The detection techniques are mainly focused on three major hazards in traditional methods. However, especially for food microorganisms, the use of traditional microbiological control techniques is time-consuming and has limitations in terms of accuracy. These two evaluations of microbial foodborne pathogens monitoring in the farm-to-table chain have shown more importance, especially during the COVID-19 pandemic. Meanwhile, there are also many new developments in the monitoring of heavy metals, algal toxins, and other pollutants. In the future, algal food safety risk assessment will not only focus on convenient, rapid, low-cost and high-accuracy detection but also be connected with some novel technologies, such as the Internet of Things (artificial intelligence, machine learning), biosensor, and molecular biology, to reach the purpose of simultaneous detection. 
  • 8.2K
  • 20 Oct 2022
Topic Review
Information and Communications Technology
Information and communications technology (ICT) is an extensional term for information technology (IT) that stresses the role of unified communications and the integration of telecommunications (telephone lines and wireless signals) and computers, as well as necessary enterprise software, middleware, storage and audiovisual, that enable users to access, store, transmit, understand and manipulate information. ICT is also used to refer to the convergence of audiovisuals and telephone networks with computer networks through a single cabling or link system. There are large economic incentives to merge the telephone networks with the computer network system using a single unified system of cabling, signal distribution, and management. ICT is an umbrella term that includes any communication device, encompassing radio, televiision, cell phones, computer and network hardware, satellite systems and so on, as well as the various services and appliances with them such as video conferencing and distance learning. ICT also includes analog technology, such as paper communication, and any mode that transmits communication. ICT is a broad subject and the concepts are evolving. It covers any product that will store, retrieve, manipulate, transmit, or receive information electronically in a digital form (e.g., personal computers including smartphones, digital television, email, or robots). Skills Framework for the Information Age is one of many models for describing and managing competencies for ICT professionals for the 21st century.
  • 8.1K
  • 27 Oct 2022
Topic Review
Conjugal Dictatorship
A "conjugal dictatorship" is the unofficial phrase which is used to denote the rule of Philippines president and dictator Ferdinand Marcos and his wife Imelda and it is also used to describe a type of family dictatorship. It originated in a book titled The Conjugal Dictatorship of Ferdinand Marcos and Imelda Marcos by Primitivo Mijares that was written in 1976 within a decade after the proclamation of martial law.
  • 8.1K
  • 04 Nov 2022
Topic Review
Benzodiazepines
The Benzodiazepines (BDZs) are a group of components that receive their name because in their chemical structure have a benzene ring joined to other seven-members heterocyclic ring called Diazepine.
  • 8.1K
  • 13 Apr 2021
Topic Review
Supercapacitor Applications and Developments
The storage of enormous energies is a significant challenge for electrical generation. Researchers have studied energy storage methods and increased efficiency for many years. In recent years, researchers have been exploring new materials and techniques to store more significant amounts of energy more efficiently. In particular, renewable energy sources and electric vehicle technologies are triggering these scientific studies. Scientists and manufacturers recently proposed the supercapacitor (SC) as an alternating or hybrid storage device.
  • 8.1K
  • 28 Mar 2022
Topic Review
Protein dynamics
Protein dynamics is a highly complex phenomenon comprising numerous contributions from motions with different mechanisms of action and happening with diverse timescales and amplitudes that highly depend on the system and the local environment.
  • 8.1K
  • 01 Nov 2020
Topic Review
Transcendence
In philosophy, transcendence is the basic ground concept from the word's literal meaning (from Latin), of climbing or going beyond, albeit with varying connotations in its different historical and cultural stages. It includes philosophies, systems, and approaches that describe the fundamental structures of being, not as an ontology (theory of being), but as the framework of emergence and validation of knowledge of being. "Transcendental" is a word derived from the scholastic, designating the extra-categorical attributes of beings.
  • 8.1K
  • 10 Nov 2022
Topic Review
Concept of Human Flourishing
Human flourishing is a thriving concept, whose use has greatly increased among academic researchers from a variety of fields, from the arts and humanities and psychology to the social and environmental sciences and economics. The rise of the concept was sparked by the positive psychology movement, which based it primarily on subjective and individual well-being; however, it was soon taken up by other currents, such as capabilities theory, reaching many social and collective concerns. Since 2016, the philosophical roots have especially energized the concept, maintaining the expansion of its use in fields related to the application of knowledge and management. 
  • 8.1K
  • 01 Mar 2022
Topic Review
Extraction of Oil from Nigella sativa Seeds
Many extraction methods, such as cold pressing, supercritical fluid extraction, Soxhlet extraction, hydro distillation (HD) method, microwave-assisted extraction (MAE), ultrasound-assisted extraction, steam distillation, and accelerated solvent extraction (ASE) have been used to extract the oils from black seeds under optimal conditions. Black seed oil contains essential fatty acids, in which the major fatty acids are linoleic, oleic, and palmitic acids.
  • 8.1K
  • 21 Sep 2022
Topic Review
Angle-Resolved Photoemission Spectroscopy (ARPES)
Angle-resolved photoemission spectroscopy (ARPES) is a vital technique in which spectra are collected from both the energy and momentum of photoemitted electrons and is indispensable for investigating the electronic band structure of solids. 
  • 8.1K
  • 08 Dec 2020
Topic Review
Antenna Gain
In electromagnetics, an antenna's power gain or simply gain is a key performance number which combines the antenna's directivity and electrical efficiency. In a transmitting antenna, the gain describes how well the antenna converts input power into radio waves headed in a specified direction. In a receiving antenna, the gain describes how well the antenna converts radio waves arriving from a specified direction into electrical power. When no direction is specified, gain is understood to refer to the peak value of the gain, the gain in the direction of the antenna's main lobe. A plot of the gain as a function of direction is called the gain pattern or radiation pattern. Antenna gain is usually defined as the ratio of the power produced by the antenna from a far-field source on the antenna's beam axis to the power produced by a hypothetical lossless isotropic antenna, which is equally sensitive to signals from all directions. Usually this ratio is expressed in decibels, and these units are referred to as decibels-isotropic (dBi). An alternative definition compares the received power to the power received by a lossless half-wave dipole antenna, in which case the units are written as dBd. Since a lossless dipole antenna has a gain of 2.15 dBi, the relation between these units is [math]\displaystyle{ \mathrm{Gain(dBd)} = \mathrm{Gain(dBi)} - 2.15 }[/math]. For a given frequency, the antenna's effective area is proportional to the power gain. An antenna's effective length is proportional to the square root of the antenna's gain for a particular frequency and radiation resistance. Due to reciprocity, the gain of any reciprocal antenna when receiving is equal to its gain when transmitting. Directive gain or directivity is a different measure which does not take an antenna's electrical efficiency into account. This term is sometimes more relevant in the case of a receiving antenna where one is concerned mainly with the ability of an antenna to receive signals from one direction while rejecting interfering signals coming from a different direction.
  • 8.0K
  • 10 Oct 2022
Topic Review
Power (International Relations)
Power in international relations is defined in several different ways. Modern discourse generally speaks in terms of state power, indicating both economic and military power. Those states that have significant amounts of power within the international system are referred to as small powers, middle powers, regional powers, great powers, superpowers, or hegemons, although there is no commonly accepted standard for what defines a powerful state. NATO Quint, the G7, the BRICS nations and the G20 are seen by academics as forms of governments that exercise varying degrees of influence within the international system. Entities other than states can also be relevant in power acquisition in international relations. Such entities can include multilateral international organizations, military alliance organizations like NATO, multinational corporations like Wal-Mart, non-governmental organizations such as the Roman Catholic Church, or other institutions such as the Hanseatic League and technology companies like Facebook and Google.
  • 8.0K
  • 11 Oct 2022
Topic Review
Bryophyllum Pinnatum
Bryophyllum pinnatum, also known as the air plant, cathedral bells, life plant, miracle leaf, and Goethe plant is a succulent plant native to Madagascar , which is a popular houseplant and has become naturalized in tropical and subtropical areas. It is distinctive for the profusion of miniature plantlets that form on the margins of its phylloclades, a trait it has in common with some other members of its genus. Many people also currently call this plant Kalanchoe pinnata. It is a succulent, perennial plant, about 1 m (39 in) tall, with a fleshy cylindrical stem and a reddish color for the youngest and it flowers most of the year. The specific epithet "pinnata" is the feminine form of the Latin adjective pinnatus, meaning "winged, pinnate".
  • 8.0K
  • 30 Nov 2022
Topic Review
Control Techniques in Photovoltaic Systems
Complex control structures are required for the operation of photovoltaic electrical energy systems. In this paper, a general review of the controllers used for photovoltaic systems is presented. This entry is based on the most recent papers presented in the literature. The control architectures considered are complex hybrid systems that combine classical and modern techniques, such as artificial intelligence and statistical models. The main contribution of this paper is the synthesis of a generalized control structure and the identification of the latest trends. The main findings are summarized in the development of increasingly robust controllers for operation with improved efficiency, power quality, stability, safety, and economics.
  • 8.0K
  • 19 Feb 2021
Topic Review
Information and Communication Technology (ICT) in Construction
Information and communication technology (ICT) is one of the important factors that support construction project performance. 
  • 8.0K
  • 28 Mar 2022
Topic Review
Mooning
Mooning is the act of displaying one's bare buttocks by removing clothing, e.g., by lowering the backside of one's trousers and underpants, usually bending over, whether also exposing the genitals or not. Mooning is used in the English-speaking world to express protest, scorn, disrespect, or provocation, or can be done for shock value, fun, or as a form of exhibitionism. Some jurisdictions regard mooning to be indecent exposure, sometimes depending on the context.
  • 8.0K
  • 27 Oct 2022
Topic Review
Ecological Urban Planning and Design
Urbanization is a defining feature of the modern age, yet the current model of urban development profoundly alters the natural environment, often reducing biodiversity and ultimately threatening human wellbeing. An ecologically based urban planning and design paradigm should consider a more harmonious relationship. Through a systematic literature review of 57 papers, this research identified relevant concepts and theories that could underpin this new paradigm. It revealed a noticeable increase in academic interest in this subject since 2013 and the development of concepts and theories that reflect a more holistic socio-ecological systems approach to urban planning and design based on a transdisciplinary integration and synthesis of research. Seven main themes underpin the academic literature: ecosystem services, socio-ecological systems, resilience, biodiversity, landscape, green infrastructure, as well as integrated and holistic approaches. Six of these can be organised into either a sustainability stream or a spatial stream, representing the foundations of a potential new ecological urban planning and design paradigm that applies sustainability-related concepts in a spatial setting. The final theme, integrated and holistic, includes concepts that reflect the fundamental characteristics of this new paradigm, which can be termed ‘urban consonance’
  • 8.0K
  • 29 Oct 2020
Topic Review
Customer Centricity
Firms are increasingly organized around the client. At the same time, there is customer pressure on green and sustainable organizations. This entry joint this two stand points in a sustainable view.
  • 8.0K
  • 03 Mar 2023
Topic Review Peer Reviewed
Prefabricated Building Systems—Design and Construction
Modern Methods of Construction with Offsite Manufacturing is an advancement from prefabricated technologies that existed for decades in the construction industry, and is a platform to integrate various disciplines into providing a more holistic solution. Due to the rapid speed of construction, reduced requirement of labour and minimised work on site, offsite manufacturing and prefabricated building systems are becoming more popular, and perhaps a necessity for the future of the global construction industry. The approach to the design and construction of prefab building systems demands a thorough understanding of their unique characteristics.
  • 8.0K
  • 13 Apr 2022
Topic Review
Alternating Current Loss of Superconductors
Alternating current (AC) loss is generated due to the movement of magnetic vortices within the superconductor when experiencing time-varying currents or magnetic fields (or both). AC loss can be categorized into transport current loss and magnetization loss based on the AC source. Particularly, when a superconductor carries a direct current (DC) and is simultaneously exposed to an AC field, dynamic resistance occurs and leads to dynamic loss. Quantification and minimization of AC loss are crucial because the produced heat can not only present severe challenges to the cryogenic systems but also impair the reliability of superconducting devices, leaving a safety hazard. To quantify the AC loss of superconductors, analytical formulae, numerical models, and experimental measurements have been widely adopted. Concerning AC loss minimization techniques, the modification of superconductor structures (filamentation and twisting), flux diverters, as well as winding techniques have been widely exploited. This entry serves to clarify the characteristics and quantification methods of AC loss as well as its minimization techniques in superconductors. It is believed to help deepen the understanding of AC loss and deliver a helpful guideline for future research efforts.
  • 7.9K
  • 14 Sep 2021
  • Page
  • of
  • 2753
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
ScholarVision Creations
Feedback