Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 -- 3720 2023-04-09 19:39:19 |
2 layout Meta information modification 3720 2023-04-10 03:03:40 |

Video Upload Options

Do you have a full video?

Confirm

Are you sure to Delete?
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
García-Fernández, P.D.; Coto-Cid, J.M.; De Gonzalo, G. Oxidative Catalytic Processes for APIs and Precursors Preparation. Encyclopedia. Available online: https://encyclopedia.pub/entry/42887 (accessed on 29 March 2024).
García-Fernández PD, Coto-Cid JM, De Gonzalo G. Oxidative Catalytic Processes for APIs and Precursors Preparation. Encyclopedia. Available at: https://encyclopedia.pub/entry/42887. Accessed March 29, 2024.
García-Fernández, Pedro D., Juan M. Coto-Cid, Gonzalo De Gonzalo. "Oxidative Catalytic Processes for APIs and Precursors Preparation" Encyclopedia, https://encyclopedia.pub/entry/42887 (accessed March 29, 2024).
García-Fernández, P.D., Coto-Cid, J.M., & De Gonzalo, G. (2023, April 09). Oxidative Catalytic Processes for APIs and Precursors Preparation. In Encyclopedia. https://encyclopedia.pub/entry/42887
García-Fernández, Pedro D., et al. "Oxidative Catalytic Processes for APIs and Precursors Preparation." Encyclopedia. Web. 09 April, 2023.
Oxidative Catalytic Processes for APIs and Precursors Preparation
Edit

Active pharmaceutical ingredients (APIs) can be defined as those biological compounds used for the detection, prevention, and treatment of different types of diseases. Asymmetric oxidation processes have constituted a valuable tool for the synthesis of APIs, especially for the preparation of optically active sulfoxides, compounds with interesting biological properties. Biocatalyzed reactions usually occur with high efficiency, excellent selectivity, good yields, environmental sustainability, and lower costs, which make them more attractive from an industrial perspective. However, it must be taken into account that these procedures also present some drawbacks, such as the (relatively) high substrate specificity of biocatalysts or the low substrate loadings required due to their generally low solubility in water.

active pharmaceutical ingredients oxidations biocatalysis Green Chemistry

1. Introduction

Active pharmaceutical ingredients (APIs) can be defined as those biological compounds used for the detection, prevention, and treatment of different types of diseases [1]. Due to the current diseases and the continuous emerging ones, the API production sector is continually growing within the global market, comprising almost 190 million dollars in 2020 and assuming an increase of 6.6% expected per year [2]. Factors such as high production costs and environmental sustainability are taken with more awareness and the recent COVID-19 pandemic have produced a change in the manufacture of APIs, promoting their importation from foreign countries. To return to local manufacturing, numerous state agencies are developing various initiatives that promote the production of APIs by following the principles of Green Chemistry with the aim of not harming the environment and complying with environmental regulations.
In the final years of the last century, it became clear that chemistry required an evolution, adapting the classical concepts of efficiency and selectivity to more sustainable procedures in which novel parameters were considered, including the use of raw starting materials, the application of more sustainable and non-hazard compounds, and the reduction of the raw disposals [3][4][5]. Thus, in early 90’s, the Green Chemistry concept was developed, but it was not until 1998 that Anastas and Warner established the Twelve Principles of this concept (Scheme 1) at the United Estates Environmental Protection Agency (US-EPA) [6][7]. In 2015, the United Nation members adopted the seventeen United Nation Sustainable Development Goals (UN SDG) [8], whose objective number 3 ensured the healthy life and the promotion of wellness for all ages. Likewise, objective number 12, which ensured sustainable consumption and productions patterns, led to industrial chemical and pharmaceutical companies to look for more sustainable procedures. These objectives, in addition to the Green Chemistry’s principles, provide a reflection on the pharmaceutical production conditions [9][10][11]. Taking as reference the Green Chemistry Principles, laboratory and industrial habits can begin to be modified for the development of novel reagents, catalysts, and solvents. The solvent in which chemical transformations are performed is of fundamental importance [12][13]. One of the principles of Green Chemistry states that “solvents should be avoided whenever possible”. However, chemical reactions generally require the presence of solvents, not only as a medium used to perform the reactions but also to develop the separation and/or purification of the reaction products, representing more or less 80% of the material used in a reaction. The most typical green solvent is obviously water, but its use presents some drawbacks in organic synthesis due to the low solubility in water of several organic molecules and the intrinsic reactivity that water can present with some functional groups. Therefore, novel solvents such as ionic liquids (ILs) and eutectic liquids (DESs) have been developed [14][15]. In addition, the use of so-called biobased solvents, that is, those organic solvents obtained from renewable sources, present interest in the field of chemical synthesis [16][17]. These biobased solvents show valuable physicochemical properties that result in a low environmental impact, so their use instead of classic organic solvents is of great interest for the implementation of green procedures.
Scheme 1. The Twelve Principles of Green Chemistry.
Another aspect in which chemists can develop greener procedures consists in the application of more efficient chemical syntheses, for instance, by presenting a lower number of steps than the classical procedures. The preparation of the well-known drug Ibuprofen, commonly used as a pain killer, is a good example. This API was first patented by the Boots company in the 1960s in a six-step procedure as shown in Scheme 2 [18].
Scheme 2. Established protocols for the preparation of ibuprofen by (a) the Classical six-step procedure and (b) the Greener three-step synthesis including a palladium-catalyzed oxidation.
After the patent ran out, the Boots-Hoechst-Celanese (BHC) company developed a novel synthetic methodology for producing ibuprofen from the same starting material and remarkably reduced the number of steps from six to three [19]. The last step consists of a palladium-catalyzed oxidation performed in water as the “green” solvent that affords the desired compound [20]. This latter protocol led to a more sustainable procedure by reducing the amount of waste and the number of purification steps in the process. In terms of atom economy [21], in the classical approach, the overall atoms used were around 40%, while the three-catalytic-step green procedure results in 77% atom utilization, representing a great improvement and a more sustainable procedure for the synthesis of this valuable API.

2. Biocatalytic Approaches for the Oxidative Preparation of APIs and Precursors

There are different types of catalysts employed in chemical synthesis, but enzymes in different preparations (well as free biocatalysts, cells free extracts, or whole cells systems) have attracted great interest since the last years of the past century [22][23][24][25]. In the mid-1980s, the development of cloning and overexpression techniques, the advances in immobilization procedures, and the application of enzymes in non-aqueous systems have allowed the development of several enzymatic methodologies for the synthesis of high added-value compounds, including the preparation of APIs [26][27][28][29][30]. Biocatalyzed reactions usually occur with high efficiency, excellent selectivity, good yields, environmental sustainability, and lower costs, which make them more attractive from an industrial perspective. However, it must be taken into account that these procedures also present some drawbacks, such as the (relatively) high substrate specificity of biocatalysts or the low substrate loadings required due to their generally low solubility in water.
Oxidations carried out by biological systems present several advantages regarding classical methodologies [31][32]. Thus, biodegradable, non-toxic, and non-hazard catalysts are employed, whereas mild reaction conditions and molecular oxygen or hydrogen peroxide as mild oxidants are used. Oxidoreductases (E.C. 1.x.x.x) can perform the biocatalytic oxidation of different functional groups, including alcohols, amines, carbonyl compounds, and heteroatoms. This class of enzymes comprises different groups of biocatalysts, including dehydrogenases, oxidases, peroxidases, and oxygenases (both mono- and di-), presenting different properties and catalytic activities.

2.1. Oxidations Catalyzed by Monooxygenases

Monooxygenases can catalyze the insertion of one atom from molecular oxygen into different molecules, whereas the other oxygen atom is released as water [33]. Among these enzymes, Baeyer-Villiger monooxygenases (BVMOs) are monooxygenases that contain flavin as prosthetic group and are able to catalyze the Baeyer-Villiger reaction and boron atom oxidation, as well as the oxygenation of different heteroatoms (sulfur, nitrogen, or phosphorous). BVMOs require nicotinamides (generally NADPH) as electron source for carrying out their activity. Due to its high price and instability, this cofactor must be recycled through a secondary enzymatic system as formate dehydrogenase (FDH), glucose or glucose-6-phosphate dehydrogenase (GDH or G6PDH), phosphite dehydrogenase (PTDH), or a ketoreductase (KRED). BVMOs have been employed for the preparation of optically active sulfoxides from prochiral sulfides in oxidative processes under mild and environmentally friendly conditions [34][35][36].
One example has been recently shown in the BVMO-catalyzed sulfoxidation step in the synthesis of AZD6738 (3), a candidate drug for the treatment of colon and hematological cancers [37]. This drug presents a chiral sulfoximine moiety in its structure, which is obtained from sulfoxide (R,R)–2. The initial synthesis of 2 from its prochiral sulfide 1 is carried out by employing m-chloroperbenzoic acid, which requires a chromatographic separation of the diasteromers obtained, yielding 50% of the desired sulfoxide as the highest yield. The application of the Kagan procedure in the presence of a titanium catalyst, afforded 2 in low yields, with degradation products. For these reasons, the biocatalytic approach for the oxidation of 1 was applied [38]. Reaction optimization was carried out using the design of experiments (DOE), analyzing the effect of substrate and enzyme concentrations, cosolvent charge, the type of buffer, and enzyme type. After analyzing more than 100 BVMOs, the best results were obtained with BVMO P1/D08 from the company Codexis in triethanolamine (TEA) buffer at pH 9.0, obtaining a 94% conversion starting from a sulfide concentration of 40 g/L and a BVMO loading of 24% weight (Scheme 3). The reaction was scaled up to the kilogram scale, analyzing all the parameters that could affect the process. Thus, an efficient agitation (500 rpm) and gas-liquid mass transfer (stream of air to supply O2 to the reaction) were required, as well as successive additions of iso-propanol (IPA), which was employed as cosolvent and cosubstrate to regenerate the cofactor NADPH in combination with the KRED CDX-019 to offset evaporation. Enzyme loading could be optimized up to 5% weight, achieving a 77% isolated yield after a one-day reaction. A further development in the biocatalyzed process was performed by carrying out the oxidations at higher scale (60 kg batches), leading to a 74% yield of the chiral sulfoxide with >99% enantiomeric excess (ee), which improves to a great extent the precedent chemical-synthesis protocols and increases the sustainability of the process.
Scheme 3. Biocatalyzed synthesis of sulfoxide (R,R)–2 employing a BVMO.
Esomeprazole, the most valuable compound from the family of prazoles, is the (S) enantiomer of omeprazole (5), the first drug of the class of proton-pump inhibitors (PPIs), which mechanistically inhibit gastric-acid secretion and are thus used as antiulcer agents [39][40]. This drug is commercialized as Nexium®, as the key step in its preparation is the selective oxidation of the prochiral sulfide pyrmetazole (thioether-5-methoxy-2-[((4-methoxy-3,5-dimethyl-2-pyridinyl)methyl)thio]–1H–benzimidzole, 4). The classical methodology for this oxidation required a modification of the Kagan method [41], employing a titanium-catalyzed procedure in the presence of cumene hydroperoxide. This methodology presents some drawbacks, such as the formation of the sulfone overoxidation product or the use of harsh reagents and conditions. For these reasons, a biocatalytic approach for the preparation of esomeprazole from pyrmetazole at a high scale was developed in 2018 by Codexis Inc. [42], employing the cyclohexane monooxygenase from Acinetobacter calcoaceticus NCIMB 9871 (CHMO), the most versatile BVMO, capable of catalyzing the oxidation of a wide set of ketones, sulfides, and other compounds [43].
Wild-type CHMO was able to catalyze the pyrmetazole oxidation with very low conversion. Directed evolution was performed on this biocatalyst to obtain an improved CHMO mutant with higher enzymatic productivity and an excellent enantioselectivity with no sulfone overoxidation-product formation. Thus, several thousands of variants were produced over 19 rounds of evolution. After combining the beneficial mutations in the subsequent rounds, it was possible to achieve a CHMO variant that improved the wild-type enzyme 140,000 times over. After finding the best biocatalyst for this process, other critical oxidation parameters, including the oxygen supply, substrate concentration, the addition of catalase to remove the hydrogen peroxide formed in the unspecific oxidation, and the presence of IPA and a KRED for the cofactor regeneration, were analyzed to find a suitable procedure for the preparation of (S)–5. Thus, the reaction was carried out in a 30-g scale (50 g/L pyrmetazole) in buffer phosphate of pH 9.0 containing 4% v/v IPA, the BVMO, KRED CDX-019, catalase, NADP+, and esomeprazole seed. The final product was recovered after extraction using isobutyl methyl ketone with 99% purity in 87% isolated yield and 99.9% ee. This result represents a good alternative to the Kagan procedure in terms of productivity, cost, and environmental impact, but it is still insufficient for developing an effective high-scale process.
One year later, a set of mutants from a CHMO from Acinetobacter calcoaceticus (a BVMO with 70% identity regarding the NCIMB 9871 variant) were prepared by modifying the biocatalyst’s active sites close to the substrate tunnel. The use of a structure-based protein-engineering approach made possible the preparation of a CHMO mutant (CHMOM6) that presented a 5611-fold increased activity on omeprazole respecting the starting biocatalyst (Scheme 4) [44]. After 22 h, this variant was able to convert a 96% or starting 4 (3.0 g/L), making it a promising candidate for applications at an industrial scale.
Scheme 4. General method for the biocatalytic synthesis of (S)-omeprazole employing BVMOs.
This novel variant, also called prazole sulfide monooxygenase (AcPSMO), was later employed in the (S)-omeprazole synthesis at a 300 L scale. The reaction was carried out in a buffer of pH 8.0 containing a 5% v/v methanol to ensure a proper substrate solubilization in the reaction medium. NADPH-cofactor regeneration was carried out by employing sodium formate and FDH, as the formate oxidation afforded CO2 in an irreversible process. Since the oxygen supply is another critical factor of the process, pressurized air was employed to increase the volumetric transfer coefficient and the saturation concentration. The biooxidation was carried out starting from 600 g of pyrmetazole, and once completed, NaOH was added to the reaction to yield the omeprazole sodium salt, which was removed from the crude mixture by membrane filtration, resulting in a great reduction of the ethyl acetate employed in the product downstream. After drying, 380 g of esomeprazole (58% yield) were recovered with a 99.1% purity and more than 99% enantiomeric excess [45]. This procedure represents the first green-by-design system for the large-scale production of esomeprazole and other PPIs, but it still requires optimization, especially regarding the biocatalyst activity.
(R)-Lansoprazole (7) is also a valuable PPI, but the different attempts to obtain this enantiomerically pure API through biocatalytic methods were unsuccessful. In 2018, two Baeyer-Villiger monooxygenases, one from Bradyrhizobium oligotrophicum (BoBVMO) and the other from Aeromicrobium marinum (AmBVMO), were employed to catalyze its formation starting from the lansoprazole sulfide with high selectivity [46]. These biocatalysts were also able to catalyze the formation of other prazoles, including omeprazole, rabeprazole, pantoprazole, and ibaprazole. A further improvement in the biocatalytic preparation of (R)-lansoprazole from its prochiral sulfide 6 was established in 2022 [47]. After analyzing different biocatalysts, the BVMO form Cupriavidus basilensis (CbBVMO) showed the highest activity and selectivity in this oxidative procedure. This BVMO can convert 10 mM of the starting material to (R)-lansoprazole completely and with 99% ee after 35 h of employing the sodium formate/FDH system for the regeneration of the NADPH cofactor (Scheme 5). The excellent selectivity featured by the catalyst and complete conversion in the reaction were also observed for the formation of other prazoles, including (R)-omeprazole, (R)-pantoprazole, and (R)-raboprazole, but the biocatalyst is still being improved in order to achieve higher catalytic efficiencies that will allow the application of this process at an industrial level.
Scheme 5. Synthesis of (R)-lansoprazole catalyzed by CbBVMO.
Apart from those monooxygenases containing flavin as a prosthetic group, heme-dependent monooxygenases are also valuable biocatalysts, catalyzing a wide set of oxidative processes. Cytochrome P450 (CYPs) enzymes belong to this family and are employed as versatile enzymes for the regio- and/or stereoselective functionalization of non-activated carbon atoms while using mild and environmentally friendly reaction conditions [48]. The main problem for these enzymes is that they usually present low activity and thermostability, which makes difficult its application at the industrial scale, making it necessary to prepare improved mutants with enhanced properties [49]. Some of these biocatalysts have been employed for the selective hydroxylation of steroids, compounds with high biological activity widely employed in pharmaceutical industry. CYP102A1, obtained from Bacillus megaterium (P450BM3), is considered one of the most active CYPs [50], but the wild-type catalyst is not active on steroids. In 2018, two P450BM3 mutants, W1F1-WC and WWV-QRS, were found to selectively oxidize testosterone (8) at the C16 position, recovering the final products 16α- (9) and 16β-hydroxytestosterone (10) with a selectivity higher than 92% (Scheme 6a) [51]. CYP106A2, another P450 also found in Bacillus megaterium [52], was able to catalyze the oxidation of progesterone (11) to 6β-hydroprogesterone (12), but with a low selectivity (Scheme 6b). Mutagenesis studies found that the A243S mutant was able to perform this oxidation with a high selectivity, up to 86% [53]. Finally, CYP260B1 from Soranghium cellulosum catalyzed the hydroxylation of cortodoxone (13) with 95% conversion [54]; 6β-hydroxycortodoxone was the main product with 94% selectivity (Scheme 6c). The T224A mutant showed an improved selectivity in the hydroxylation of 11-deoxycorticosterone, recovering 75% of 9α-hydroxy-11-deoxycoricosterone (14) [55].
Scheme 6. CYP-catalyzed hydroxylations of steroids. (a) Selective oxidation of testosterone (8); (b) Biooxidation of progesterone (11), and (c) Biocatalyzed hydroxylation of cortodoxone (13).

2.2. Other Biocatalyzed Oxidations

Islatravir (17) is a nucleoside analogue with high anti-HIV activity [56]. Several synthetic routes have been proposed for its preparation, but most of them require several steps with multiple protection/deprotection procedures. The biocatalytic approach proposed for the synthesis of 17 reduced the number of steps, making it possible to achieve the final product using a nine-enzyme system when starting from ethynyl glycerol 15 (Scheme 7) [57]. The initial step of this process consists in the selective oxidation of 15 to an aldehyde 16 catalyzed by a galactose oxidase from Fusarium graminearum. Oxidases are a class of oxidoreductases able to catalyze different oxidative reactions by employing molecular oxygen at mild reaction conditions [58][59][60]. The substrate oxidation and the reduction of molecular oxygen occur in the same active site, forming hydrogen peroxide as a byproduct and not requiring any cofactor for their activity. These enzymes have been employed in different types of oxidative procedures. Initial experiments were carried out with a galactose oxidase variant, which catalyzed the formation of the undesired (S)-enantiomer of compound 16 with moderate conversion, so several rounds of evolution were required to obtain mutants with improved activity, lower product inhibition, and a reversal on the enantioselectivity by mutating the positions W290 and F464. Oxidations were carried out in the presence of two additional enzymes: catalase, which was used to eliminate the hydrogen peroxide formed in the medium, and peroxidase, used to maintain the proper copper-oxidation state. Once the reaction conditions were optimized, it was possible to achieve (R)-16 with 97% enantiomeric excess and a high conversion.
Scheme 7. Galactose oxidase enantioselective oxidation of islatravir precursor 15.
Furthermore, the manufacture of APIs on an industrial scale has been recently improved by employing continuous flow synthesis. This allows a larger scale production with better atomic efficiency, in addition to facilitating the automation of the synthetic process [61][62][63][64]. One example has been recently shown in the preparation of captopril (20), an angiotensin-converting enzyme inhibitor employed for the treatment of hypertension [65]. This API was discovered and developed at E. R. Squibb & Sons Pharmaceuticals in the 1970s and is still prescribed [66]. In 2021, Romano et al. designed a synthetic route under continuous flow for captopril synthesis in which the first reaction was a biocatalytic oxidation followed by three chemical transformations until the enantiomerically pure active ingredient was obtained, as shown in Scheme 8 [67]. The oxidation of commercially available diol 18 was carried out using a continuous flow of 1.0 g/L of starting diol in an acetate buffer of pH 6.0 catalyzed by Acetobacter aceti MIM 2000/28, an acetic acid bacterium. These types of bacteria can perform the chemo-, regio-, and stereo-selective oxidation of primary alcohols, affording the corresponding carboxylic acids with good yields, while aldehydes were not normally isolated [68]. The biocatalyst was immobilized by entrapment in dry cells of alginate. After this, it was packed into a glass column with an inner diameter of 15 mm and swelled by passing buffer through the column. The air supply was maintained using an air-liquid flow stream. After 10 min, carboxylic acid 19 was recovered with 95% conversion and 97% enantiomeric excess. By employing 400 mg of the immobilized enzyme, around 50 mL was collected, achieving the highest conversion rate in the first 35 mL. In order to recover the final product, a catch-and-release system was employed using an Ambersep 900 OH resin-packed column in which the acid was entrapped, and afterwards, eluted by treatment with HCl 1.0 N.
Scheme 8. Flow synthesis of carboxylic acid precursor of captopril by enzymatic oxidation catalyzed by Acetobacter aceti MIM 2000/8.
Vanillin (4-hydroxy-3-methoxybenzaldehyde) is one of the most used flavors in the world, but apart from this use, it has been also employed in the pharmaceutical and medical industries as it displays antioxidant, neuroprotective, and anticancer activities [69]. In 2017, different Deep Eutectic Solvents (DESs) were employed as cosolvents (1% v/v) in the conversion of isoeugenol (21) into vanillin (22) in a process catalyzed by Lysinibacillus fusiformis CGMCC1347 cells [70]. DESs are liquids prepared by mixing a hydrogen-bond donor with a hydrogen-bond acceptor (generally a quaternary amine) at a precise molar ratio at about 80 °C. The liquid formed maintains its state, presenting valuable properties as (co)solvents in catalysis. These compounds are prepared with a complete atom economy, being biodegradable, cheap, and having high thermal stability [71][72].
For almost all of the cosolvents tested, higher conversions were achieved than when employing only an aqueous buffer. Researchers claimed that this improvement was due to higher cell permeability due to the DESs effect, which facilitates the entrance of the hydrophobic substrate. When the oxidations were performed at a higher DES content (20% v/v), higher yields were achieved with several of these compounds than in only buffer. The use of Lysinibacillus fusiformis cells immobilized on poly(vinylalcohol)-alginate allowed the recycling of the biocatalyst 13 times within 72 h at 30 °C in buffer of pH 7.0 containing 20% v/v choline chloride:galactose as DES, while maintaining the enzymatic activity (Scheme 9).
Scheme 9. Synthesis of vanillin (22) by oxidation catalyzed by employing immobilized cells of Lysinbacillys fusiformis in the presence of Deep Eutectic Solvents.
Armodafinil is a potent drug used as a treatment for fatigue in narcolepsy, sleep apnea, and sleep disorders [73][74]. It is the isomer (R) of the racemic compound, modafinil (24), which has the longest duration of both enantiomers due to a slower metabolism and excretion, resulting in a longer time of action. The group, Jiang et al., reported an enantioselective synthesis of (R)-modafinil using a chloroperoxidase (CPO) in an oxidative process (Scheme 10) [75]. These heme-dependent enzymes are capable of catalyzing halogenation reactions of organic compounds by generating reactive hypohalites in the presence of halides and hydrogen peroxide; while in the absence of the corresponding halides, CPOs are able to participate in several oxidative procedures, including hydroxylations, epoxidations, or sulfoxidations [76]. Thus, the sulfoxidation of 2-(diphenylmethylthio)acetamide (23) using CPO from Caldariomyces fumago as a oxidative catalyst and tert-butyl hydrogen peroxide (TBPH) as oxidizing agent in an aqueous buffer of pH 5.5 afforded (R)-modafinil with an 11% yield and 97% ee. This low yield is due to the low solubility of the compound 23 in an aqueous medium. For this reason, ionic liquids (ILs), quaternary ammonium salts (QAS), and polyhydroxylated compounds were employed as additives to increase the substrate solubility [77]. All of these compounds had a positive effect on the biocatalyzed system, making it possible to achieve a 41% (R)–24 when employing the ionic liquid, 1-ethyl-3-methylimidazolium bromide ([emim]Br), while maintaining the sulfoxide’s optical purity.
Scheme 10. CPO-catalyzed synthesis of (R)-modafinil by asymmetric sulfoxidation.

References

  1. U.S. Food & Drug Administration Glossary of Terms. Available online: https://www.fda.gov/drugs/drug-approvals-and-databases/drugsfda-glossary-terms (accessed on 22 January 2023).
  2. Park, J.; Kelly, M.A.; Kang, J.X.; Seemakurti, S.S.; Ramirez, J.L.; Hatzell, M.C.; Sievers, C.; Bommarius, A.S. Production of active pharmaceutical ingredients (APIs) from lignin-derived phenol and catechol. Green Chem. 2021, 23, 7488–7498.
  3. Horvath, I.T.; Anastas, P.T. Innovations and Green Chemistry. Chem. Rev. 2007, 107, 2169–2173.
  4. Anastas, P.; Eghbali, N. Green Chemistry: Principles and practice. Chem. Soc. Rev. 2010, 39, 301–312.
  5. Sheldon, R.A. Fundamentals in Green Chemistry: Efficiency in reaction design. Chem. Soc. Rev. 2012, 41, 1437–1451.
  6. Anastas, P.T.; Williamson, T.C. Green Chemistry: Frontiers in Benign Chemical Syntheses and Processes; Oxford University Press: Oxford, UK, 1998.
  7. Anastas, P.T.; Warner, J.C. Green Chemistry: Theory and Practice; Oxford University Press: New York, NY, USA, 1998.
  8. United Nation Sustainable Development Goals. Available online: https://sdgs.un.org/goals (accessed on 22 January 2023).
  9. Campos, K.R.; Coleman, P.J.; Alvárez, J.C.; Dreher, S.D.; Garbaccio, R.M.; Terrett, N.K.; Tillyer, R.D.; Truppo, M.D.; Parmee, E.R. The importance of synthetic chemistry in the pharmaceutical industry. Science 2019, 363, eaat0805.
  10. Sharma, S.; Das, J.; Braje, W.M.; Dash, A.K.; Handa, S. A glimpse into Green Chemistry practices in the pharmaceutical industry. ChemSusChem 2020, 13, 2859–2875.
  11. Kar, S.; Sanderson, H.; Roy, K.; Benfenati, E.; Leszczynski, J. Green chemistry in the synthesis of pharmaceuticals. Chem. Rev. 2022, 122, 3637–3710.
  12. Constable, D.J.C.; Jimenez-Gonzalez, C.; Henderson, R.K. Perspective on solvent use in the pharmaceutical industry. Org. Process Res. Dev. 2007, 11, 133–137.
  13. Prat, D.; Pardigon, O.; Flemming, H.-W.; Letestu, S.; Ducandas, V.; Isnard, P.; Guntrum, E.; Senac, T.; Ruisseau, S.; Cruciani, P.; et al. Sanofi’s solvent selection guide: A step toward more sustainable processes. Org. Process Res. Dev. 2013, 17, 1517–1525.
  14. Plechkova, N.V.; Seddon, K.R. Application of ionic liquids in the chemical industry. Chem. Soc. Rev. 2008, 37, 123–150.
  15. Liu, Y.; Friesen, J.B.; Lankin, J.B.; Chen, S.-N.; Pauli, G.F. Natural deep eutectic solvents: Properties, applications, and perspectives. J. Nat. Prod. 2018, 81, 679–690.
  16. Miele, M.; Pillari, V.; Pace, V.; Alcántara, A.R.; de Gonzalo, G. Application of biobased solvents in asymmetric catalysis. Molecules 2022, 27, 6701.
  17. Miele, M.; Ielo, L.; Pillari, V.; Fernández, M.; Alcántara, A.R.; Pace, V. Biomass-Derived Solvents in Sustainable Organic Synthesis: Tools and Strategies; Protti, S., Palmieri, A., Eds.; Royal Society of Chemistry: Croydon, UK, 2022; pp. 239–279.
  18. Stuart, N.J.; Sanders, A.S. Phenyl Propionic Acids. US Patent 3385886, 2 February 1961.
  19. Andraos, J. Designing a green organic chemistry lecture course. In Green Organic Chemistry in Lecture and Laboratory; Dicks, A.P., Ed.; CRC Press: Boca Raton, FL, USA, 2016; Chapter 2; pp. 29–68.
  20. Papadogianakis, G.; Maat, L.; Sheldon, R.A. Catalytic conversions in water. Part 5: Carbonylation of 1-(4-isobutylphenyl)- ethanol to ibuprofen catalysed by water-soluble palladium-phosphine complexes in a two-phase system. J. Chem. Technol. Biotechnol. 1997, 70, 83–91.
  21. Trost, B.M. Atom Economy: A challenge for organic synthesis. Angew. Chem. Int. Ed. 1995, 34, 259–281.
  22. Sheldon, R.A.; Woodley, J.M. Role of biocatalysis in sustainable chemistry. Chem. Rev. 2018, 108, 801–838.
  23. Domínguez de María, P.; de Gonzalo, G.; Alcántara, A.R. Biocatalysis as useful tool in asymmetric synthesis: An assessment of recently granted patents (2014–2019). Catalysts 2019, 9, 802.
  24. Wu, S.; Snajdrova, R.; Moore, J.C.; Baldenius, K.; Bornscheuer, U.T. Biocatalysis: Enzymatic synthesis for industrial applications. Angew. Chem. Int. Ed. 2021, 60, 88–119.
  25. Domínguez de María, P. Biocatalysis, sustainability, and industrial applications: Show me the metrics. Curr. Opin. Green Sustain. Chem. 2021, 31, 100514.
  26. Patel, R.N. Biocatalysis for synthesis of pharmaceuticals. Bioorg. Med. Chem. 2018, 26, 1252–1274.
  27. Simíc, S.; Zukíc, E.; Schmermund, L.; Faber, K.; Winkler, C.K.; Kroutil, W. Shortening synthetic routes to small molecule active pharmaceutical ingredients employing biocatalytic methods. Chem. Rev. 2022, 122, 1052–1126.
  28. Rossini, G.; Robescu, M.S.; Licastro, E.; Tedesco, C.; Martello, I.; Maffei, L.; Vincenti, G.; Bavaro, T.; Collina, S. Biocatalysis: A smart and green tool for the preparation of chiral drugs. Chirality 2022, 34, 1403–1418.
  29. De Gonzalo, G.; Alcántara, A.R.; Domínguez de María, P.; Sánchez-Montero, J.M. Biocatalysis for the asymmetric synthesis of Active Pharmaceutical Ingredients (APIs): This time is for real. Expert Opin. Drug Discover. 2022, 17, 1159–1171.
  30. Zawodny, W.; Montgomery, S.L. Evolving new chemistry: Biocatalysis for the synthesis of amine-containing pharmaceuticals. Catalysts 2022, 12, 595.
  31. Colonna, S.; Del Sordo, S.; Gaggero, N.; Carrea, G.; Pasta, P. Enzyme-mediated catalytic asymmetric oxidations. Heteroat. Chem. 2002, 13, 467–473.
  32. Dong, J.J.; Fernández-Fueyo, E.; Hollmann, F.; Paul, C.E.; Pesic, M.; Schmidt, S.; Wang, Y.; Younes, S.; Zhang, W. Biocatalytic oxidation reactions: A chemist’s perspective. Angew. Chem. Int. Ed. 2018, 57, 9238–9261.
  33. Torres-Pazmiño, D.E.; Winkler, M.; Glieder, A.; Fraaije, M.W. Monooxygenases as biocatalysts: Classification, mechanistic aspects, and biotechnological applications. J. Biotechnol. 2010, 146, 9–24.
  34. Leisch, H.; Morley, K.; Lau, P.C.K. Baeyer-Villiger monooxygenases: More than just green chemistry. Chem. Rev. 2011, 111, 4165–4222.
  35. Fürst, M.J.L.J.; Gran-Scheuch, A.; Aalbers, F.S.; Fraaije, M.W. Baeyer–Villiger monooxygenases: Tunable oxidative biocatalysts. ACS Catal. 2019, 9, 11207–11241.
  36. De Gonzalo, G.; Alcántara, A.R. Multienzymatic processes involving Baeyer–Villiger monooxygenases. Catalysts 2021, 11, 605.
  37. Foote, K.M.; Nissink, J.W.M.; Turner, P. Morpholinio Pyrimidines and Their Use in Therapy. Patent WO2011154737A, 11 June 2011.
  38. Goundry, W.R.F.; Adams, B.; Benson, H.; Demeritt, J.; McKown, S.; Mullholland, K.; Robertson, A.; Siedlecki, P.; Tomlin, P.; Vare, K. Development and scale-up of a biocatalytic process to form a chiral sulfoxide. Org. Process Res. Develop. 2017, 21, 107–113.
  39. Lindberg, P.; Brändström, A.; Wallmark, B.; Mattsson, H.; Rikner, L.; Hoffman, K.-J. Omeprazole: The first proton pump inhibitor. Med. Res. Rev. 1990, 10, 1–54.
  40. Baker, D.E. Esomeprazole magnesium (Nexium). Rev. Gastroenterol. Disord. 2001, 1, 32–41.
  41. Cotton, H.; Elebring, T.; Larsson, M.; Li, L.; Sörensen, H.; von Unge, S. Asymmetric synthesis of esomeprazole. Tetrahedron: Asymmetry 2000, 11, 3819–3825.
  42. Bong, Y.K.; Song, S.; Nazor, J.; Vogel, M.; Widegren, M.; Smith, D.; Collier, S.J.; Wilson, R.; Palanivel, S.M.; Narayanaswamy, K.; et al. Baeyer-Villiger monooxygenase-mediated synthesis of esomeprazole as an alternative for Kagan sulfoxidation. J. Org. Chem. 2018, 83, 7453–7458.
  43. Stewart, J.D. Cyclohexanone monooxygenase: A useful reagent for asymmetric Baeyer-Villiger reactions. Curr. Org. Chem. 1998, 2, 195–216.
  44. Zhang, Y.; Wu, Y.-Q.; Xu, N.; Zhao, Q.; Yu, H.-L.; Xu, J.-H. Engineering of cyclohexanone monooxygenase for the enantioselective synthesis of (S)-omeprazole. ACS Sustain. Chem. Eng. 2019, 7, 7218–7226.
  45. Xu, N.; Zhu, J.; Wu, Y.-Q.; Zhang, Y.; Xia, J.-Y.; Zhao, Q.; Lin, G.-Q.; Yu, H.-L. Enzymatic preparation of the chiral (S)-sulfoxide drug esomeprazole at pilot-scale levels. Org. Process Res. Develop. 2020, 24, 1124–1130.
  46. Zhang, Y.; Liu, F.; Xu, N.; Wu, Y.-Q.; Zheng, Y.C.; Zhao, Q.; Lin, G.-Q.; Yu, H.-L.; Xu, J.-H. Discovery of two native Baeyer-Villiger monooxygenases for asymmetric synthesis of bulky chiral sulfoxides. Appl. Environ. Microbiol. 2018, 84, e00638-18.
  47. Liu, F.; Shou, C.; Geng, Q.; Zhao, C.; Xu, J.; Yu, H. A Baeyer-Villiger monooxygenase from Cupriavidus basilensis catalyzes asymmetric synthesis of (R)-lansoprazole and other pharmaco-sulfoxides. Appl. Microbiol. Biotechnol. 2021, 105, 3169–3180.
  48. Urlacher, V.; Girhard, M. Cytochrome P450 monooxygenases: An update on perspectives for synthetic applications. Trends Biotechnol. 2012, 30, 26–36.
  49. Zhang, X.; Peng, Y.; Zhao, J.; Li, Q.; Yu, X.; Acevedo-Rocha, C.G.; Li, A. Bacterial cytochrome P450-catalyzed regio and stereoselective steroid hydroxylation enabled by directed evolution and rational design. Bioresur. Bioprocess. 2020, 7, 2.
  50. Nahri, L.O.; Fulco, A.J. Characterization of a catalytically self-sufficient 119,000 dalton cytochrome P450 monooxygenase induced by barbiturates in Bacillus megaterium. J. Biol. Chem. 1986, 26, 7160–7169.
  51. Acevedo-Rocha, C.G.; Gamble, C.; Lonsdale, R.; Li, A.; Nett, N.; Hoebenreich, S.; Deege, A. P450-catalyzed regio- and diastereoselective steroid hydroxylation: Efficient directed evolution enabled by mutability landscaping. ACS Catal. 2018, 8, 3395–3410.
  52. Schmitz, D.; Janocha, S.; Kiss, F.M.; Bernhardt, R. CYP106A2—A versatile biocatalyst with high potential for biotechnological production of selectively hydroxylated steroid and terpenoid compounds. BBA-Proteins Proteom. 2018, 1866, 11–22.
  53. Nikolaus, J.; Nguyen, K.T.; Virus, C.; Riehm, J.L.; Hutter, M.; Bernhardt, R. Engineering of CYP106A2 for steroid 9α- and 6β-hydroxylation. Steroids 2017, 120, 41–48.
  54. Litzenburger, M.; Kern, F.; Khatri, Y.; Bernhardt, R. Conversions of tricyclic antidepressants and antipsychotics with selected P450s from Sorangium cellulosum So ce56. Drug Metab. Dispos. 2015, 43, 392–399.
  55. Litzenburger, M.; Bernhardt, R. CYP260B1 acts as 9α-hydroxylase for 11-deoxycorticosterone. Steroids 2017, 127, 40–45.
  56. Ohrui, H.; Kohgo, S.; Hayakawa, H.; Kodama, E.; Matsuoka, M.; Nakata, T.; Mitsuya, H. 2′-Deoxy-4′-C-ethynyl-2-fluoroadenosine: A nucleoside reverse transcriptase inhibitor with highly potent activity against wide spectrum of HIV-1 strains, favorable toxic profiles, and stability in plasma. Nucl. Nucl. Nucleic Acids 2007, 26, 1543–1546.
  57. Huffman, M.A.; Fryszkowska, A.; Alvizo, O.; Borra-Garske, M.; Campos, K.R.; Canada, K.A.; Devine, P.N.; Duan, D.; Forstater, J.H.; Grosser, S.T.; et al. Design of an in vitro biocatalytic cascade for the manufacture of islatravir. Science 2019, 366, 1255–1259.
  58. Dijkman, W.P.; de Gonzalo, G.; Mattevi, A.; Fraaije, M.W. Flavoprotein oxidases: Classification and applications. Appl. Microbiol. Biotechnol. 2013, 97, 5177–5188.
  59. Pickl, M.; Fuchs, M.; Glueck, S.M.; Faber, K. The substrate tolerance of alcohol oxidases. Appl. Microbiol. Biotechnol. 2015, 16, 6617–6642.
  60. Wahart, A.J.C.; Staniland, J.; Miller, G.J.; Cosgrove, S.C. Oxidase enzymes as sustainable oxidation catalysts. R. Soc. Open Sci. 2022, 9, 211572.
  61. Wiles, C.; Watts, P. Improving chemical synthesis using flow reactors. Expert Opin. Drug Discover. 2007, 2, 1487–1503.
  62. De Santis, P.; Meyer, L.-E.; Kara, S. The rise of continuous flow biocatalysis—Fundamentals, very recent developments and future perspectives. React. Chem. Eng. 2020, 5, 2155–2184.
  63. Ötvos, S.B.; Kappe, O. Continuous flow asymmetric synthesis of chiral active pharmaceutical ingredients and their advance interemediates. Green Chem. 2021, 23, 6117–6138.
  64. Santi, M.; Sancineto, L.; Nascimento, V.; Braun Azeredo, J.; Orozco, E.V.M.; Andrade, L.H.; Gröger, H.; Santi, C. Flow biocatalysis: A challenging alternative for the synthesis of APIs and natural compounds. Int. J. Mol. Sci. 2021, 22, 990.
  65. Cushman, D.W.; Cheung, H.S.; Sabo, E.F.; Ondetti, M.A. Design of potent competitive inhibitors of angiotensin-converting enzyme. Carboxyalkanoyl and mercaptoalkanoyl amino acids. Biochemistry 1977, 16, 5484–5491.
  66. Ondetti, M.A.; Cushman, D.W. Azetidine-2-carboxylic Acid Derivatives. US Patent 4046889, 6 September 1977.
  67. De Vitis, V.; Dall’Oglio, F.; Pinto, A.; De Micheli, C.; Molinari, F.; Conti, P.; Romano, D.; Tamborini, L. Chemoenzymatic synthesis in flow reactors: A rapid and convenient preparation of captopril. ChemistryOpen 2017, 6, 668–673.
  68. Romano, A.; Gandolfi, R.; Nitti, P.; Rollini, M.; Molinari, F. Acetic acid bacetria as enantioselective biocatalysts. J. Mol. Catal. B: Enzym. 2002, 17, 235–240.
  69. Kaur, B.; Chakraborty, D. Biotechnological and molecular approaches for vanillin production: A review. Appl. Biochem. Biotechnol. 2013, 169, 1353–1372.
  70. Yang, T.-X.; Zhao, L.-Q.; Wang, J.; Song, G.-L.; Liu, H.-M.; Cheng, H.; Yang, Z. Improving whole-cell biocatalysis by addition of deep eutectic solvents and natural deep eutectic solvents. ACS Sustain. Chem. Eng. 2017, 5, 5713–5722.
  71. Domínguez de María, P.; Guajardo, N.; Kara, S. Enzyme catalysis: In DES. In Deep Eutectic Solvents: Synthesis, Properties and Applications; Ramón, D.J., Guillena, G., Eds.; Wiley-VCH: Weinheim, Germany, 2019; pp. 257–272.
  72. Hasani, F.Z.I.M.; Amzazi, S.; Lavandera, I. The versatile applications of DES and their influence on oxidoreductase-mediated transformations. Molecules 2019, 24, 2190.
  73. Czeisler, C.A.; Walsh, J.K.; Roth, T.; Hughes, R.J.; Wright, K.P.; Kingsbury, L.; Arora, S.; Schwartz, J.R.L.; Niebler, G.E.; Dinges, D.F. Modafinil for excessive sleepiness associated with shift-work sleep disorder. N. Engl. J. Med. 2005, 353, 476–486.
  74. Pliszka, A.G. Modafinil: A review and its potential use in the treatment of long COVID fatigue and neurocognitive deficits. Am. J. Psychiatry Res. J. 2022, 17, 5–7.
  75. Gao, F.; Wang, L.; Liu, Y.; Wang, S.; Jiang, Y.; Hu, M.; Li, S.; Zhai, Q. Enzymatic synthesis of (R)-modafinil by chloroperoxidase-catalyzed enantioselective sulfoxidation of 2-(diphenylmethylthio) acetamide. Biochem. Eng. J. 2015, 93, 243–249.
  76. Torres-Duarte, C.; Vazquez-Duhalt, R. Applications and prospective of peroxidase biocatalysis in the environmental field. In Biocatalysis Based on Heme Peroxidases; Torres, E., Ayala, M., Eds.; Springer: Berlin, Germany, 2010.
  77. Itoh, T. Ionic Liquids as tool to improve enzymatic organic synthesis. Chem. Rev. 2017, 117, 10567–10607.
More
Information
Subjects: Chemistry, Organic
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register : , ,
View Times: 520
Entry Collection: Organic Synthesis
Revisions: 2 times (View History)
Update Date: 10 Apr 2023
1000/1000