It has been estimated that in 2010, over two million patients with end-stage kidney disease may have faced premature death due to a lack of access to affordable renal replacement therapy, mostly dialysis. To address this shortfall in dialytic kidney replacement therapy, researchers propose a novel, cost-effective, and low-complexity hemodialysis method called allo-hemodialysis (alloHD). With alloHD, instead of conventional hemodialysis, the blood of a patient with kidney failure flows through the dialyzer’s dialysate compartment counter-currently to the blood of a healthy subject (referred to as a “buddy”) flowing through the blood compartment. Along the concentration and hydrostatic pressure gradients, uremic solutes and excess fluid are transferred from the patient to the buddy and subsequently excreted by the healthy kidneys of the buddy. Researchers developed a mathematical model of alloHD to systematically explore dialysis adequacy in terms of weekly standard urea Kt/V. Researchers showed that in the case of an anuric child (20 kg), four 4 h alloHD sessions are sufficient to attain a weekly standard Kt/V of >2.0. In the case of an anuric adult patient (70 kg), six 4 h alloHD sessions are necessary. As a next step, researchers designed and built an alloHD machine prototype that comprises off-the-shelf components. Researchers then used this prototype to perform ex vivo experiments to investigate the transport of solutes, including urea, creatinine, and protein-bound uremic retention products, and to quantitate the accuracy and precision of the machine’s ultrafiltration control. These experiments showed that alloHD performed as expected, encouraging future in vivo studies in animals with and without kidney failure.