Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Qin Wang
 + 5206 word(s) 5206 2021-12-09 04:17:58 |
2 format correction
Peter Tang
 Meta information modification 5206 2021-12-22 02:45:04 |

Video Upload Options

We provide professional Video Production Services to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Wang, Q. Food-Grade Nanoemulsions. Encyclopedia. Available online: https://encyclopedia.pub/entry/17405 (accessed on 24 December 2024).
Wang Q. Food-Grade Nanoemulsions. Encyclopedia. Available at: https://encyclopedia.pub/entry/17405. Accessed December 24, 2024.
Wang, Qin. "Food-Grade Nanoemulsions" Encyclopedia, https://encyclopedia.pub/entry/17405 (accessed December 24, 2024).
Wang, Q. (2021, December 21). Food-Grade Nanoemulsions. In Encyclopedia. https://encyclopedia.pub/entry/17405
Wang, Qin. "Food-Grade Nanoemulsions." Encyclopedia. Web. 21 December, 2021.
Food-Grade Nanoemulsions
Edit
This entry is adapted from the peer-reviewed paper 10.3390/molecules24234242

Nanoemulsions, exhibiting droplet sizes of <200 nm, represent liquid-in-liquid dispersions that are kinetically stable. Water and oil are the two incompatible liquids most extensively applied in commercial environments. Because of their small size, characteristics such as visible transparency, high surface area per unit volume, sound stability and tunable rheology are often observed. Additionally, large-scale nanoemulsions’ preparation is easily achievable in industrial conditions. Therefore, nanoemulsions are especially suitable for commercial applications.

nanoemulsions preparation stability application encapsulation

1. Introduction

Nanoemulsions, exhibiting droplet sizes of <200 nm, represent liquid-in-liquid dispersions that are kinetically stable. Water and oil are the two incompatible liquids most extensively applied in commercial environments. Because of their small size, characteristics such as visible transparency, high surface area per unit volume, sound stability and tunable rheology are often observed. Additionally, large-scale nanoemulsions’ preparation is easily achievable in industrial conditions. Therefore, nanoemulsions are especially suitable for commercial applications [1][2][3].
Since the oil and water phases are distributed relatively spatially, simple nanoemulsions can be divided into oil-in-water (O/W) nanoemulsions denoting the dispersion of small oil droplets in an aqueous medium, and water-in-oil (W/O) nanoemulsions signifying small water droplets distributed in an oil medium [3]. Additionally, utilizing a two-step procedure, it is also possible to produce two types of multiple nanoemulsions, namely water-in-oil-in-water (W/O/W) or oil-in-water-in-oil (O/W/O) [4]. For instance, the preparation of W/O/W nanoemulsions is achieved by assimilating the oil phase comprising lipophilic surfactant with the water phase to form the initial W1/O nanoemulsions, which are then homogenized with an additional water phase (W2) comprising hydrophilic surfactant [5].
The methods used for nanoemulsions’ preparation can be divided into two principal groups namely low-energy and high-energy techniques. When environmental factors (e.g., composition or temperature) or nanoemulsions’ compositions are modified, small droplets are generated, providing the basis necessary for the successful operation of the low-energy methods [3][6][7][8]. High-energy methods usually consume significant energy (~108–1010 W/kg) to form small droplets. Furthermore, in the utilization of high-energy methods, the oil and water phases are breached and blended using the powerful cavitational, shear and turbulent flow profiles created by the specifically designed devices [9][10].
Nanoemulsions are thermo-dynamically unstable since the free energy required to separate the oil phases from the water phases is lower than what is necessary for emulsification. Therefore, nanoemulsions typically break down during storage due to various mechanisms, such as gravitational separation (creaming or sedimentation), flocculation, coalescence and Ostwald ripening [11]. Moreover, various chemical and biochemical reactions such as flavor loss, biopolymer hydrolysis, color fading and lipid oxidation can adversely affect nanoemulsions, causing them to degrade during storage or lose their acceptable quality characteristics. Among the chemical deterioration phenomena mentioned above, lipid oxidation occurs the most frequently in nanoemulsions [12].
For several commercial uses, it is crucial that nanoemulsions-based products remain physiochemically stable when exposed to unfavorable environmental conditions (including temperature, mechanical forces, and ionic strength) during their production, storage, transportation and application [3][6]. The addition of suitable stabilizers, including emulsifiers, weighting agents, texture modifiers and ripening inhibitors can improve the physical stability of nanoemulsions [6][13]. Given that, three methods are commonly used to improve the nanoemulsions’ chemical stability, including the manipulation of interfacial characteristics (e.g., thickness, charge, and chemical reactivity), the addition of chelating agents or antioxidants, as well as controlling environmental elements (e.g., temperature, light, pH, and oxygen levels) [3][6].
So far, a number of food ingredients and additives, including bioactive lipids, vitamins, flavorings, acidulants, preservatives, colorings, antioxidants and so on, have been encapsulated by nanoemulsions and some of them are already available in the market [1][3][14]. A larger droplet surface area, as well as a decline in particle size of the nanoemulsions may lead to increased functionality of the bioactive compounds contained within them. The majority of the bioactive compounds are characteristically lipophilic. Thus, O/W nanoemulsions are commonly used to improve the solubility and dispersibility of lipophilic substance in aqueous media, enhance stability, appearance, taste or texture, increase uptake absorption and bioavailability, and reduce the off-flavor (such as bitterness or astringency) [14][15][16].

2. Preparation

A number of methods were developed to facilitate nanoemulsions, which include high-energy as well as low-energy techniques [17]. Selecting an appropriate method for the preparation of nanoemulsions rely on the characteristics of the compounds needing homogenization (specifically the surfactant and oil phases), as well as the required physicochemical attributes and operational qualities of the ultimate product (including rheological, optical, release, and stability properties) [6]. Understanding the various fabrication methods is crucial for relevant personnel to choose the most suitable preparation technique and fabricate nanoemulsions for special application.

2.1. Low-Energy Methods

Low-energy methods are denoted by changes in environmental conditions, as well as the composition of the mixture influencing the development of oil nanodroplets within the mixed systems containing surfactants, oil, and water. The most frequently used low-energy techniques are spontaneous emulsion (SE), emulsion phase inversion (EPI) (including phase inversion composition (PIC), and phase inversion temperature (PIT)) [8][18]. The principles of the characteristic low-energy techniques used to O/W nanoemulsions were shown in Figure 1.
/media/item_content/202112/61c282ca5db88molecules-24-04242-g001.png
Figure 1. Schematic depiction of the characteristic low-energy techniques used to create O/W nanoemulsions, including phase inversion temperature (PIT), phase inversion composition (PIC) and spontaneous emulsion (SE) [19].
The low-energy methods for nanoemulsions’ preparation and their application in encapsulation of bioactive compounds are summarized in Table 1.
Table 1. Examples of application of low-energy methods for nanoemulsions’ preparation.

Emulsification Method

Optimal Processing Conditions

Bioactive Compound Encapsulated

Droplet Diameter (nm)

Reference

SE

(1) titration of organic phase into aqueous phase, (2) constant stirring, 600 rpm, (3) room temperature

Peppermint

essential

oil

≈50

[20]

(1) titration of organic phase into the aqueous phase, (2) constant stirring, 1000 rpm/10 min, (3) room temperature

Citrus oil

10–30

[21]

(1) titration of organic phase into aqueous phase, (2) constant stirring, 750 rpm, (3) room temperature

Citrus oil

≈100

[22]

(1) titration of organic phase into aqueous phase, (2) constant stirring, 600 rpm/15 min, (3) room temperature

Cinnamaldehyde

<100

[23]

(1) stirred, 1000 rpm/1 h, (2) room temperature

Capsaicin

13–14

[24]

(1) deprotonated eugenol in hot alkaline added to surfactant mixtures, (2) the mixtures were acidified to pH 7.0, stirred, 600 rpm

Eugenol

≈ 109–139

[25]

PIC

(1) mixed oil and surfactant, (2) oil phase added to aqueous phase, (3) phase inversion occurred at a certain oil-to water ratio, (4) stirred, 30 min

Docosahexaenoic acid

Eicosapentaenoic acid

<200

[26]

(1) aqueous phase (water, glycerol) added to organic phase (sunflower oil, polysorbate 80, curcumin), (2) stirred, 300 rpm/30 min

Curcumin

≈200

[27][28]

(1) mixed organic phase and aqueous phase, (2) continuing stirred, (3) ambient temperature

Essential

Oils

Blend*

29.55–37.12

[29]

PIT

(1) all components were stirred, 30 min, (2) heated to 15 °C above the PIT, (3) the temperature was reduced to the PIT

Cinnamon oil

101

[30][31]

(1) coarse emulsions were heated, 21–98 °C /0–3 h, (2) immediately quenching in ice/water with hand shaking

Lemon oil

≈100

[32]

(1) mixing all components, (2) 3 temperature cycles (90–60–90–60–90–75 °C)

Curcuminoids

20–100

[33]

Note: essential oils blend* containing cape jasmine absolute, wan saw long oil, lemongrass oil and basil oil.

2.2. High-Energy Methods

High-energy methods, denote mechanical techniques, employing mechanical equipment to separate the dispersed phase into droplets inside the continuous phase to generate forces that are highly disruptive [10]. Since high-energy methods permit the utilization of non-toxic/natural emulsifiers at lower concentration levels, they are more appropriate for food-related nanoemulsions preparation, while they are also expedient for production at an industrial scale and the necessary equipment is available commercially [14]. Usually, two steps are involved when producing O/W nanoemulsions using high-energy methods. Firstly, the coarse O/W emulsions were formed by mixing of the components using a high-speed mixer or stirrer. Later on, the coarse emulsions are exposed to disruptive forces to facilitate a reduction in the droplet diameter to 200~500 nm [10]. Based on the devices used, high-energy methods include rotor-stator emulsification (RSE), high-pressure homogenization (HPH), high-pressure microfluidic homogenization (HPMH) and ultrasonic homogenization (USH) [9][34]. The principles of high-energy techniques used to create O/W nanoemulsions were shown in Figure 2./media/item_content/202112/61c282e6caed4molecules-24-04242-g002.png
Figure 2. Schematic portrayal of high-energy techniques utilized for the preparation of O/W nanoemulsions. (A) traditional high-speed mixers are usually employed to form a coarse O/W emulsions before emulsification by (B) high-pressure homogenization (HPH), (C) ultrasonic homogenization (USH), (D) high-pressure microfluidic homogenization (HPMH) [10].
The high-energy methods for nanoemulsions’ preparation and their application in encapsulation of bioactive compounds are summarized in Table 2.
Table 2. Examples of application of high-energy methods for nanoemulsions’ preparation.

Emulsification Method

Optimal Processing Conditions

Bioactive Compound Encapsulated

Droplet Diameter (nm)

Reference

RSE

24000 rpm/25 min

docosahexaenoic acid

87

[35]

HPH

800 bar/8 cycles

docosahexaenoic acid

11.17

[35]
 

103 M Pa/10 cycles

pepper extract

132 ± 2.0-145 ± 1.0

[36]
 

60 MPa/3 cycles

curcumin

203.6-260.6

[37]
 

40 kpsi/10 cycles

fish oil

89.7 ± 27.7

[38]

HPMH

137.9 MPa/10 cycles

rosemary essential oil

2.88

[39]

1000 bar/5 cycles

docosahexaenoic acid

148

[40]

350 bar/5 cycles

curcumin

275.5

[41]

13 kpsi/1 cycle

fish oil

<160

[42]

USH

350 W/5 min

Resveratrol

20.41 ± 3.41

[43]

resveratrol cyclodextrin inclusion complex

24.48 ± 5.70
 

20.5 kHz/400 W for 15 min

thymus daenensis oil

171.88 ± 1.57

[44]

Combined method

HPH (24,000 rpm/15 min) + HSP (800 bar/8 cycles)

docosahexaenoic acid

11.31

[35]

3. Stability

3.1. Physical Stability

The undesirable molecular interactions at the oil-water interface as a result of the hydrophobic effect induces thermodynamic instability in nanoemulsions [45]. Nanoemulsions will eventually degrade as a result of several mechanisms such as flocculation, gravitational separation, coalescence, phase separation, and Ostwald ripening, as shown in Figure 3 [3][6]. Understanding the essential mechanisms responsible for nanoemulsions’ instability is crucial in developing systems exhibiting adequate stability qualities.
/media/item_content/202112/61c2830d7b2d2molecules-24-04242-g003.png
Figure 3. Schematic representation of the mechanisms responsible for nanoemulsion physical instability (phase separation): gravitational separation, flocculation, coalescence and Ostwald ripening.

3.1.1. Gravitational Separation

The process in which nanoemulsion droplets move downward (sedimentation) or upward (creaming) due to their density exceeding or being lower than that of the liquid surrounding it, is known as gravitational separation. Water tends to move in a downward direction, while oil migrates upward since most liquid oils are less dense than water in a liquid state. Therefore, sedimentation is common in W/O nanoemulsions, while O/W exhibit more cases of creaming [3][6]. An increase in droplet size, density contrast in conjunction with a decline in the aqueous phase viscosity, influence the motion speed of the droplets induced by gravitational separation [6].
According to Arancibia et al., the inferior stability of nanoemulsions containing 15% avocado oil and 8% starch could be ascribed to gravitational separation of phases caused by fat droplet flocculation/coalescence and starch precipitation/aggregation [46]. According to Chen et al., due to gravitational separation (sedimentation), pure cinnamaldehyde could not produce stable nano-emulsions. The oil droplets moved downwards in the pure cinnamaldehyde system due to the higher density of cinnamaldehyde (1050 kg m-3) than that of room temperature water (997 kg m-3) [47].

3.1.2. Flocculation and Coalescence

The colloidal interaction between the droplets determines two types of droplet accumulation namely coalescence and flocculation [6].
The process by which two or more droplets attract each other to form clusters is known as flocculation [6]. As reported by Bai et al., utilizing amphiphilic polysaccharides above a certain level as emulsifiers could promote emulsion instability, which was attributed to exhausted flocculation mechanism, could diminish the stability of some nanoemulsion products in the long run [48]. As reported by Li et al., D-limonene nanoemulsions became unstable and tended to flocculate and coalesce, which caused a variation in zeta-potential at the storage temperatures [49]. As reported by Bai et al., a cream layer was evident for saponin-coated droplets when salt concentrations exceeded 300 mM, suggesting that the accumulation of droplets primarily resulted from flocculation instead of coalescence [50].
The process by which a larger droplet is formed when several droplets collide and amalgamate is known as coalescence [6]. As reported by Bai et al., rhamnolipids were able to stabilize O/W nanoemulsions. The droplets coated with rhamnolipids displayed stability following thermal treatments between 30 °C to 90 °C, with salt concentrations below 100 mM NaCl, pH levels between 5 and 9, as well as storage for at least two weeks at room temperature. However, nanoemulsions were unstable when subjected to storage conditions that were extremely acidic (pH 2–4) or in the presence of high ionic strength (200–500 mM NaCl). These results were ascribed to coalescence caused by a decline in the electrostatic repulsion among the droplets in the range and magnitude at high salt and low pH levels [50]. Wooster et al. prepared triglyceride nanoemulsions by the HPMH method, using a combination of Span 80 and Tween 80 as emulsifiers and n-alcohol as a co-solvent. However, addition of an excess of n-alcohol led to nanoemulsion destabilization, coalescence was found to be the primary destabilization mechanism [51]. According to Shu et al., nanoemulsions containing astaxanthin stabilized by saponins displayed an extremely high sensitivity and were predisposed to droplet coalescence when high salt concentrations were present. These results could be ascribed to a decline in the electrostatic repulsion among the negatively charged droplets facilitated by the presence of Na+ cations, and inducing the coalescence and instability of the droplets [52].

3.1.3. Ostwald Ripening

Driven by the curvature differences of the particles, dispersed phase molecules diffuse through the continuous phase causing the expansion of larger droplets and the shrinkage of smaller droplets in a process known as Ostwald ripening, which is the primary instability mechanism for such nanoemulsions. Ostwald ripening occurs when the dispersed phase solubility in large droplets (small curvature) is lower than in small droplets (large curvature), which prompts droplet growth due to the appearance of a concentration gradient [53].
According to Ryu et al., nanoemulsions containing essential oil are especially susceptible to Ostwald ripening because of a significant oil phase solubility in the aqueous phase even though its predominantly hydrophobic nature [54]. According to Walker et al., during or soon after homogenization, nanoemulsions containing thyme oil experienced swift droplet growth when low levels of fish oil (<75%) were present. The reason was that the relatively high water-solubility of thyme oil induced expeditious droplet growth as a result of Ostwald ripening [55].

3.2. Chemical Stability

Various biochemical and chemical reactions such as flavor loss, lipid oxidation, biopolymer hydrolysis and color fading occur in nanoemulsions leading them to lose their favorable characteristics. Of these, lipid oxidation is considered as one of the most significant types of chemical degradation [12]. The interfacial areas of nanoemulsions are relatively large, leading to accelerated lipid oxidation due to water-soluble pro-oxidants (e.g., transition metals) coming into contact with oil-soluble reactants (e.g., polyunsaturated lipids and hydroperoxides) [56]. Park et al. suggested that the long-term stability of nanoemulsions might exhibit a more significant association with the chemical stability instead of the physical stability in the case of O/W nanoemulsions with retinol [57].

3.3. Correlative Instability Mechanism

Each instability mechanism is always associated with others or they appear simultaneously [8]. Powell et al. prepared nanoemulsions using Pluronic F68 and various oils generally utilized for pharmaceutical and cosmetic applications, and explored their stability mechanisms. The eventual destabilization appeared due to the rising of large drops which formed through coalescence and Ostwald ripening and coalescence were responsible for the formation of large drops, which rose to cause the ultimate destabilization [58]. According to Chen et al., for pure cinnamaldehyde, a transparent layer was evident at the top of the nanoemulsion samples, showing that storage prompted the oil droplets to sink to the bottom of the test tube, and might be attributed to both the physical and chemical effects, such as chemical interaction, coalescence, Ostwald ripening, and sedimentation. In detail, cinnamaldehyde displays relatively high water-solubility, inducing droplet expansion via Ostwald ripening. Consequently, the mean particle size of the nanoemulsions expands, resulting in accelerated droplet coalescence and sedimentation [47].

4. Nanoemulsion Stabilizer

In order to satisfy the specific requirements of commercial applications, nanoemulsions should be designed to improve their kinetic stability, which is achieved through meticulous structure and composition control. Particularly, it is critical to select adequate aqueous and oil phases, as well as the most suitable additives, such as emulsifier, weighting agent, texture modifier, and ripening inhibitor [6]. The stabilization mechanism usually refers to the physicochemical properties of nanoemulsion such as composition, interfacial composition, electric charge, droplet size, physical state, aggregation state, rheology property and so on [3][6].
For instance, apart from decreasing the droplet size, gravitational separation can also be reduced by adding thickeners to improve the viscosity of the aqueous phase, or adding weighting agents to decrease the density contrast. Droplet aggregation due to flocculation and coalescence can be restricted by making sure that the repellent interactions (e.g., steric and electrostatic) of droplets exceed their attractive interactions (e.g., hydrophobic, van der Waals, and depletion). This is often accomplished by changing the aqueous phase composition or the nature of the emulsifier used [6]. The addition of ripening inhibitors or the utilization of an oil phase displaying low water-solubility, can restrict Ostwald ripening [6][59].

5. Applications in Encapsulation of Bioactive Compounds

The use of many bioactive compounds, such as bioactive lipids, essential oils, flavor compounds, vitamins, polyphenols, carotenoids and so on in the food industry remain challenging due to their inadequate solubility in water as well as their stability in food preparations [14][60]. Generally, nanoemulsions are usually designed to retain bioactive compounds during storage within a food product but control their release when they encounter specific environmental conditions, such as the mouth for flavors or the gastrointestinal tract for pharmaceuticals or nutraceuticals [61]. Additionally, the delivery and slow release of hydrophobic bioactive compounds in O/W conventional emulsions or nanoemulsions are beneficial to enhance their bioaccessibility by improving their solubility and the incorporation of them into mixed micelles of the simulated gastrointestinal tract (GIT) system [62][63].

5.1. Bioactive Lipids

Essential polyunsaturated fatty acids (PUFAs), especially omega-3 oils, e.g., eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), α-linoleic acid and α-linolenic acid, are the main bioactive lipids [64][65]. PUFAs reportedly have substantial health benefits, such as the neuroplasticity of nerve membranes, nervous system activity, memory-related learning, cognitive development, synaptic transmission, and synaptogenesis [66]. However, bioactive lipids are highly unstable against oxidation and presented low odor thresholds. Therefore, exceedingly low concentrations affected the sensory parameters. Encapsulation of bioactive lipids in nanoemulsions is beneficial in reducing autoxidation, displaying compatibility with various food products, enhancing functional properties, solubilizing flavor or volatile compounds in lipids, while masking bitter or astringent tastes [67].
According to Zhang et al., stable DHA and EPA nanoemulsions were prepared by EPI method. Within 20 days, the best nanoemulsions have good physical stability under different storage conditions, and the retention rate of DHA/EPA can be stabilized at >60% [26]. Dey et al., suggested that nanoemulsions demonstrated a considerably higher uptake rate of PUFAs in three small intestinal regions, compared to conventional emulsions. Meanwhile, nanoemulsions showed a stronger resistance to lipopolysaccharide-induced nitric oxide production in the peripheral blood mononuclear cells of rats [38]. As reported by Karthik et al., DHA O/W nanoemulsions were fabricated by microfluidization using Tween 40, SC or SL as emulsifiers. Among them, Tween 40 stabilized nanoemulsions showed improved stability and extent of lipid digestibility [40].

5.2. Essential Oils and Flavor Compounds

Essential oils, in the form of aromatic volatile liquids, as well as semi-liquids, are commonly derived from the seeds, flowers, leaves, buds, fruits, bark, resins, and roots of plants. The antimicrobial activity provided by essential oils is beneficial against several types of fungi, Gram-positive bacteria, and Gram-negative bacteria [68]. The nature of essential oils, including hydrophobic, volatile and reactive, limits the incorporation of them into food matrices directly [69]. The significant application challenges regarding the incorporation of essential oils into food could be negated by their encapsulation in nanoemulsions. Essential oils loaded within nanoemulsions can be formed by two methods.
One method is homogenizing essential oils in the aqueous solutions containing emlsifier. According to Xue et al. and Ma et al., nanoemulsions containing essential oils (e.g., thyme oil, eugenol) were fabricated by directly homogenizing the essential oils in the aqueous solutions containing CS and lecithin, indicating that the antimicrobial characteristics were similar or exceeded those of the free essential oils [70][71]. As reported by Wang et al., eugenol (2-methoxy-4-(2-propenyl)-phenol), which forms a major part of clove essential oil, presents a wide range of antibacterial and antifungal activity. Eugenol-loaded nanoemulsions stabilized by the mixture of zein and SC were prepared by SE method. The results showed that the entrapment efficiency of eugenol was 84.24% when 1% (v/v) of eugenol and 2% (m/v) of SC/zein (1:1 mass ratio) were used. The obtained nanoemulsions demonstrated the most restricted size distribution, and retained remarkable stability throughout a storage period at ambient temperatures (22 °C, 30 days), while exhibiting exceptional redispersibility following freeze-drying or spray-drying [25]. According to Sharma et al., a synergistic O/W nanoemulsion containing clove and lemongrass oil was developed and its potential as antifungal agents was explored. The antifungal activity of clove and lemongrass oil was enhanced by formulation in nanoemulsions [72]. According to Moghimi et al., stable nanoemulsion of Thymus daenensis oil was produced by utilizing lecithin and Tween 80 as emulsifiers, with droplet size of 171.88 ± 1.57 nm. The nanoemulsions showed stronger antibacterial activity than pure oil against Acinetobacter baumannii, which is notoriously resistant to multiple drugs. This result is evidenced by the minimum inhibitory concentration of nanoemulsion and pure oil being 30–45 μg/mL and 62.5–87.5 μg/mL, respectively. Additionally, after incubation for 24 h, the nanoemulsions exhibited remarkable anti-biofilm activity at a sub-lethal dose (56.43% inhibition in 1/2 minimum inhibitory concentration) [44].
Another method is to pre-dissolve essential oils in commonly used oils and then emulsified in the aqueous phase. As reported by Yang et al., nanoemulsions containing the mixtures of citrus oils (e.g., bergamot oil and sweet orange oil) and common triacylglycerol oils (e.g., corn oil and MCT oil) with different mixing ratios were produced. The subsequent results suggested that the stability of nanoemulsions that contain mixed oil significantly exceeded that of nanoemulsions containing pure citrus oil [73]. As reported by Tian et al., it was difficult using pure cinnamaldehyde as the oil phase to form stable nanoemulsions. Stable nanoemulsions containing cinnamaldehyde were obtained with the addition of MCT. Additionally, nanoemulsions containing cinnamaldehyde and MCT could provide an enhanced long-term inhibition on the bacterial growth of Escherichia coli compared with pure cinnamaldehyde [23].
Recently, essential oil nanoemulsion-containing films have been produced and used for active food packaging. However, this aspect has been extensively described elsewhere [10] and is not repeated in the present review.

5.3. Vitamins

As essential micronutrients, vitamins form a crucial part of human health. There are two types of vitamins: fat-soluble (lipophilic) and water-soluble (hydrophilic). Vitamins A, E, D, and K are grouped as the lipophilic vitamins, while vitamins B and C are hydrophilic.
Lipophilic vitamins are biologically sensitive material, displaying marginal chemical stability and water solubility [74]. For instance, Vitamins A, and Vitamins E are easily oxidized, particularly when exposed to light, heat, light, and metal ions. Furthermore, visible and fluorescent light possessed the ability to alter the vitamin K structure dramatically. Vitamin D is the only element that was not significantly affected by the processing and storage environments [75]. Nanoemulsions are usually fabricated to improve their chemical stability, solubility and oral bioavailability.
Park et al. examined the stability of O/W nanoemulsions containing retinol (vitamin A) when exposed to ultraviolet (UV) light and subjected to a storage period at varying temperatures (4 °C, 25 °C, and 40 °C). The results suggested that UV light reduced the residual retinol in the emulsion systems that utilized low oil concentrations during preparation compared to bulk oil. However, oil concentrations exceeding 10 wt% caused residual retinol levels to be higher than in the bulk oil due to elevated emulsion turbidity [57]. According to Ji et al., the vitamin A palmitate retention ration in the nanoemulsion exceeded 93% following a storage period of three months at room temperature [76]. As reported by Kadappan et al., the nanoemulsions-based delivery system increased in vitro bioaccessibility of vitamin D3 by 3.94 folds, as evidenced by the significantly higher concentration of vitamin D3 in micelles. An animal study showed that the nanoemulsions significantly increased the serum 25(OH)D3 by 73% [77]. According to Schoener et al., the type of carrier oil (corn oil, fish oil and flaxseed oil) significantly affected the preparation, simulated gastrointestinal performance and stability of vitamins D3 nanoemulsions stabilized by pea protein. The results showed that the three lipids were all digested in the small intestinal simulation model within the first few minutes. Additionally, for the different carrier oils, both the digestion rate in simulated gastrointestinal and vitamin bioaccessibility declined in the following order: corn oil > fish oil ≈ flaxseed oil [78]. As reported by Lv et al., nanoemulsions containing vitamin E were fabricated by dual-channel microfluidizer, using corn oil as a carrier oil and using QS as an emulsifier. The optimized nanoemulsions resulted in a relatively high vitamin bioaccessibility (53.9%) [79]. According to Moradi et al., the cellular uptake of a-tocopherol in nanoemulsions displayed a rise of up to 12 times higher than microsized a-tocopherol [80]. As reported by Campani et al., nanoemulsions containing vitamin K1 have been prepared to overcome some difficulties associated to the incorporation of semi-solid vitamin K1 into food formulations. The results showed that nanoemulsions could offer an option for the commercial development of a liquid and aqueous formulation to deliver vitamin K1 [81].

5.4. Phenolic Compounds

Phenolic compounds displaying significant antioxidant properties can be employed in biological preparations and various food products such as anti-microbial, anti-atherogenic, anti-inflammatory, anti-thrombotic, and anti-allergenic agents [82]. Phenolic compounds are classified into lipophilic and hydrophilic compounds.
Lipophilic phenolic compounds were usually encapsulated by O/W nanoemulsions. O/W nano-emulsification, can reportedly improve the bioavailability of lipophilic phenolic compounds due to higher absorption, solubility, and permeation into the body, as well as the safeguarding of the lipophilic phenolic compounds in nanoemulsions within food preparations [67]. According to Kumar et al., curcumin nanoemulsions with sodium caseinate were prepared. The cellular uptake of curcumin was improved by nanoemulsification because that the slow release of curcumin in the intestine is beneficial to incorporate it into mixed micelles of the bile salts or phospholipids [83]. Zheng et al. prepared curcumin nanoemulsions by three different methods (e.g., pH-driven, conventional, and heat-driven) and compared them with three curcumin supplements that are currently widely available. The results showed that the bioaccessibility of all curcumin obtained nanoemulsions compared well to even the most superior commercial formulation. Additionally, the nanoemulsions produced using the pH-driven technique denoted the highest concentrations of curcumin in the mixed micelles phase following exposure to a simulation of a gastrointestinal tract [84]. Sugasini et al. prepared a phospholipid-stabilized nanoemulsion containing curcumin and carrier oil (sunflower oil, coconut oil, or linseed oil) and explored the possibility of nanoemulsions to enhancing the curcumin bioavailability and DHA levels in rats. The results indicated the presence of high DHA levels in tissue and serum lipids, as well as elevated curcumin levels in the serum, heart, liver, and brain of rats given feed nanoemulsions containing linseed oil and curcumin [85]. According to Silva et al., compared with WPI-nanoemulsions, nanoemulsions stabilized by WPI-chitosan mixture showed the improved apparent permeability coefficient of curcumin via Caco-2 cells, as well as the improved bioaccessibility and antioxidant ability [86]. According to Singh et al., the rate and extent of bioavailability of t-resveratrol was significantly enhanced by loading in nanoemulsions rather than that of free t-resveratrol. Alongside this, the results of an in situ single pass intestinal perfusion study showed a remarkable enhancement in the absorptivity and permeability parameters of nanoemulsions [87]. Son et al. prepared quercetin-loaded O/W nanoemulsions containing Tween 80, caprylic/capric triglyceride (Captex® 355), soy lecithin, and sodium alginate using the SE method. The nanoemulsion polydispersity index and particle size were <0.47 and 207–289 nm, respectively. The nanoemulsions were stable at pH levels ranging from 6.5–9.0 during a storage period of three months at 21 °C and 37 °C. Additionally, in rats that received a diet high in cholesterol, the nanoemulsion containing quercetin displayed a more substantial efficacy in decreasing the level of serum and hepatic cholesterol, with higher release of bile acid into feces, compared to free quercetin [88]. As reported by Carli et al., nanoemulsion-encapsulated quercetin was created with the EIP method and using two separate surfactants, namely Brij 30, and Tween 80. Nanoemulsions were obtained with mean particle size of 180–200 nm. The retention of quercetin was around 70% in nanoemulsions that contained 0.30% quercetin (w/w) and were stored for 90 d. Additionally, the incorporation of quercetin-loaded nanoemulsions in chicken patés can improve their oxidative stability in a considerably more efficient manner than synthetic antioxidants. Sensory information suggested that the quercetin encapsulation in nanoemulsions enhances consumer acceptability of the products [89].
Hydrophilic phenolics or the mixture of hydrophilic and lipophilic phenolics were usually encapsulated by W/O nanoemulsions. According to Rabelo et al., stable W/O nanoemulsions containing açaí berry extracts (ABE, rich in anthocyanins) were successfully formulated. All W/O nanoemulsions containing different concentrations of ABE exhibited high antioxidant activity and retention rates of anthocyanins after 30 days of storage. When 2% of anthocyanins was encapsulated in a 30 wt% ϕd (weight fraction of the dispersed phase) W/O nanoemulsions, they had an estimated half-life of 385 days [90]. Moreover, hydrophilic phenolics can also be encapsulated by O/W nanoemulsions. As reported by Peng et al., The O/W tea polyphenols (TP) nanoemulsion were prepared with polysorbate 80 and corn oil using the HPH method. The TP nanoemulsions with particle sizes of 99.42 ± 1.25 nm were stable during a 20-day storage period at 4 °C, 25 °C, or 40 °C. The results of in vitro assay of the simulated digestion model displayed a higher degree of bioaccessibility with regard to (−)-epigallocatechin gallate (EGCG), while (−)-epicatechin (EC), (−)-epigallocatechin (EGC), and (−)-gallocatechin gallate (GCG) exhibited lower bioaccessibility in the nanoemulsions compared to the aqueous solutions [91].

5.5. Carotenoids

Carotenoids represent natural lipophilic pigments that provide various health advantages such as safeguarding the eyes and reducing certain cancers. Increasing carotenoid bioavailability can be achieved when they are ingested with dietary lipids since the micelles derived from digested products are beneficial to solubilization and transportation of carotenoids to the epithelial cells [67][92][93]. Encapsulation of hydrophobic carotenoids into O/W nnaoemulsions could protect them from external stress factors. Additionally, the bioavailability of carotenoids can be increased after nano-emulsification.
As reported by Fan et al., O/W nanoemulsions containing β-carotene (BC) were prepared using WPI and WPI-dextran as emulsifiers. Following a 30-day storage period at 25 °C and 50 °C, the highest BC retention rate was evident in nanoemulsions that were stabilized with WPI-DT (5 kDa) conjugate due to the relatively high scavenging ability of diphenyl-1-picryl-hydrazil (DPPH). Additionally, the encapsulation in nanoemulsions stabilized by WPI-dextran (70 kDa) significantly impeded the lipolysis and release of BC [94]. According to Yi et al., BC retention of lactalbumin-catechin conjugate-stabilized nanoemulsions was significantly greater than that of lactalbumin-stabilized ones, which was attributed to the increased radical-scavenging and binding ability with free metal ion of lactalbumin after grafting with catechin [95]. Meng et al. prepared nanoemulsions containing TP and BC and found that the addition of TP was effective in enhancing the oral bioavailability and storage stability of BC. During storage at varying temperatures of 4 °C, 25 °C, and 35 °C, the stability and the BC retention of nanoemulsions containing TP and BC was higher than those of nanoemulsions containing only BC. Additionally, as shown by the in vitro simulated digestion assay and the in vivo absorption study, comparing with nanoemulsions containing only BC, the nanoemulsions containing TP and BC exhibited the higher recovery rates of BC at digestion phases I and II and the higher conversion efficiency of BC to vitamin A [96]. As reported by Sotomayor-Gerding et al., carotenoid (astaxanthin or lycopene) nanoemulsions were obtained by the HPH method. Nanoemulsions were stable to environmental conditions and storage time. The nanoemulsion oxidative stability was improved by trolox and the stability of lycopene nanoemulsions was improved by the synergistic effect of trolox and butylated hydroxytoluene (BHT). Additionally, carotenoid nanoemulsions were partially (66%) digested and highly bioaccessible (70–93%) [97]. As reported by Liu et al., the bioaccessibility of astaxanthin in nanoemulsions containing different carrier oils (olive oil, flaxseed oil and corn oil) was much higher than that in nanoemulsions containing no lipid, due to that the hydrophobic carotenoids could be solubilized by the mixed micelles formed from the carrier oils. The final free fatty acid release, as well as the bioaccessibility of astaxanthin exhibited a decrease in the following order: olive oil > flaxseed oil > corn oil [98]. As reported by Shen et al., the nanoemulsions stabilized with WPI had the highest cellular uptake of astaxanthin, followed, in order, by PWP, WPI–lecithin mixture, PWP–lecithin mixture (5.05 ± 0.1%), lecithin, and Tween 20 [99].

References

  1. Dasgupta, N.; Ranjan, S.; Gandhi, M. Nanoemulsion ingredients and components. Environ. Chem. Lett. 2018, 17, 917–928.
  2. Maali, A.; Mosavian, M.T.H. Preparation and Application of Nanoemulsions in the Last Decade (2000–2010). J. Dispers. Sci. Technol. 2013, 34, 92–105.
  3. McClements, D.J.; Jafari, S.M. Nanoemulsions: Formulation, Applications, Characterization; Elsevier Science: Amsterdam, Netherlands, 2018; General Aspects of Nanoemulsions and Their Formulation.
  4. McClements, D.J. Advances in fabrication of emulsions with enhanced functionality using structural design principles. Curr. Opin. Colloid Interface Sci. 2012, 17, 235–245.
  5. Delfanian, M.; Razavi, S.M.A.; Khodaparast, M.H.H.; Kenari, R.E.; Golmohamma-dzadeh, S. Influence of main emulsion components on the physicochemical and functional properties of W/O/W nano-emulsion: Effect of polyphenols, Hi-Cap, basil seed gum, soy and whey protein isolates. Food Res. Int. 2018, 108, 136–143.
  6. Zhang, Z.; McClements, D.J. Nanoemulsions: Formulation, Applications, Characterization; Elsevier Science: Amsterdam, Netherlands, 2018; Overview of Nanoemulsion Properties: Stability, Rheology, and Appearance.
  7. Gupta, A.; Eral, H.B.; Hatton, T.A.; Doyle, P.S. Nanoemulsions: Formation, properties and applications. Soft Matter 2016, 12, 2826–2841.
  8. Komaiko, J.S.; McClements, D.J. Formation of Food-Grade Nanoemulsions Using Low-Energy Preparation Methods: A Review of Available Methods. Compr. Rev. Food Sci. Food Saf. 2016, 15, 331–352.
  9. Håkansson, A.; Rayner, M. Nanoemulsions: Formulation, Applications, Characterization; Elsevier Science: Amsterdam, Netherlands, 2018; General Principles of Nanoemulsion Formation by High-Energy Mechanical Methods.
  10. Espitia, P.J.P.; Fuenmayor, C.A.; Otoni, C.G. Nanoemulsions: Synthesis, Characterization, and Application in Bio-Based Active Food Packaging. Compr. Rev. Food Sci. Food Saf. 2019, 18, 264–285.
  11. McClements, D.J.; Rao, J. Food-grade nanoemulsions: Formulation, fabrication, properties, performance, biological fate, and potential toxicity. Crit. Rev. Food Sci. Nutr. 2011, 51, 285–330.
  12. Walker, R.; Decker, E.A.; McClements, D.J. Development of food-grade nanoemulsions and emulsions for delivery of omega-3 fatty acids: Opportunities and obstacles in the food industry. Food Funct. 2015, 6, 42–55.
  13. Zeeb, B.; Herz, E.; McClements, D.J.; Weiss, J. Impact of alcohols on the formation and stability of protein-stabilized nanoemulsions. J. Colloid Interface Sci. 2014, 433, 196–203.
  14. Salvia-Trujillo, L.; Soliva-Fortuny, R.; Rojas-Graü, M.A.; McClements, D.J.; Martín-Belloso, O. Edible Nanoemulsions as Carriers of Active Ingredients: A Review. Annu. Rev. Food Sci. Technol. 2017, 8, 439–466.
  15. Seibert, J.B.; Bautista-Silva, J.P.; Amparo, T.R.; Petit, A.; Pervier, P.; Almeida, J.C.D.S.; Azevedo, M.C.; Silveira, B.M.; Brandao, G.C.; de Souza, G.H.B.; et al. Development of propolis nanoemulsion with antioxidant and antimicrobial activity for use as a potential natural preservative. Food Chem. 2019, 287, 61–67.
  16. Tian, H.; Li, D.; Xu, T.; Hu, J.; Rong, Y.; Zhao, B. Citral stabilization and characterization of nanoemulsions stabilized by a mixture of gelatin and Tween 20 in an acidic system. J. Sci. Food Agric. 2017, 97, 2991–2998.
  17. Shams, N.; Sahari, M.A. Nanoemulsions: Preparation, structure, functional properties and their antimicrobial effects. Appl. Food Biotechnol. 2016, 3, 138–149.
  18. Sagitani, H.; Nabeta, K.; Nagai, M. A new preparing method for fine O/W emulsions by D phase emulsification and their application to cosmetic industry. J. Jpn. Oil Chem. Soc. 1991, 40, 988–994.
  19. Rai, V.K.; Mishra, N.; Yadav, K.S.; Yadav, N.P. Nanoemulsion as pharmaceutical carrier for dermal and transdermal drug delivery: Formulation development, stability issues, basic considerations and applications. J. Control. Release 2018, 270, 203–225.
  20. Barzegar, H.; Mehrnia, M.A.; Nasehi, B.; Alipour, M. Fabrication of peppermint essential oil nanoemulsions by spontaneous method: Effect of preparing conditions on droplet size. Flavour Fragr. J. 2018, 33, 351–356.
  21. Zhao, S.; Tian, G.; Zhao, C.; Li, C.; Bao, Y.; DiMarco-Crook, C.; Tang, Z.; Li, C.; McClements, D.J.; Xiao, H.; et al. The stability of three different citrus oil-in-water emulsions fabricated by spontaneous emulsification. Food Chem. 2018, 269, 577–587.
  22. Yildirim, S.T.; Oztop, M.H.; Soyer, Y. Cinnamon oil nanoemulsions by spontaneous emulsification: Formulation, characterization and antimicrobial activity. LWT Food Sci. Technol. 2017, 84, 122–128.
  23. Tian, W.-L.; Lei, L.-L.; Zhang, Q.; Li, Y. Physical Stability and Antimicrobial Activity of Encapsulated Cinnamaldehyde by Self-Emulsifying Nanoemulsion. J. Food Process Eng. 2016, 39, 462–471.
  24. Ghiasi, Z.; Esmaeli, F.; Aghajani, M.; Ghazi-Khansari, M.; Faramarzi, M.A.; Amani, A. Enhancing analgesic and anti-inflammatory effects of capsaicin when loaded into olive oil nanoemulsion: An in vivo study. Int. J. Pharm. 2019, 559, 341–347.
  25. Wang, L.; Zhang, Y. Eugenol Nanoemulsion Stabilized with Zein and Sodium Caseinate by Self-Assembly. J. Agric. Food. Chem. 2017, 65, 2990–2998.
  26. Zhang, L.; Zhang, F.; Fan, Z.; Liu, B.; Liu, C.; Meng, X. DHA and EPA nanoemulsions prepared by the low-energy emulsification method: Process factors influencing droplet size and physicochemical stability. Food Res. Int. 2019, 121, 359–366.
  27. Borrin, T.R.; Georges, E.L.; Brito-Oliveira, T.C.; Moraes, I.C.; Pinho, S.C. Technological and sensory evaluation of pineapple ice creams incorporating curcumin-loaded nanoemulsions obtained by the emulsion inversion point method. Int. J. Dairy Technol. 2018, 71, 491–500.
  28. Borrin, T.R.; Georges, E.L.; Moraes, I.C.F.; Pinho, S.C. Curcumin-loaded nanoemulsions produced by the emulsion inversion point (EIP) method: An evaluation of process parameters and physico-chemical stability. J. Food Eng. 2016, 169, 1–9.
  29. Nantarat, T.; Chansakaow, S.; Leelapornpisid, P. Optimization, characterization and stability of essential oils blend loaded nanoemulsions by PIC technique for anti-tyrosinase activity. Int. J. Pharm. Pharm. Sci. 2015, 7, 308–312.
  30. Chuesiang, P.; Siripatrawan, U.; Sanguandeekul, R.; Yang, J.S.; McClements, D.J.; McLandsborough, L. Antimicrobial activity and chemical stability of cinnamon oil in oil-in-water nanoemulsions fabricated using the phase inversion temperature method. LWT Food Sci. Technol. 2019, 110, 190–196.
  31. Chuesiang, P.; Siripatrawan, U.; Sanguandeekul, R.; McLandsborough, L.; McClements, D.J. Optimization of cinnamon oil nanoemulsions using phase inversion temperature method: Impact of oil phase composition and surfactant concentration. J. Colloid Interface Sci. 2018, 514, 208–216.
  32. Su, D.; Zhong, Q. Lemon oil nanoemulsions fabricated with sodium caseinate and Tween 20 using phase inversion temperature method. J. Food Eng. 2016, 171, 214–221.
  33. Jintapattanakit, A.; Hasan, H.M.; Junyaprasert, V.B. Vegetable oil-based nanoemulsions containing curcuminoids: Formation optimization by phase inversion temperature method. J. Drug Deliv. Sci. Technol. 2018, 44, 289–297.
  34. Akhavan, S.; Assadpour, E.; Katouzian, I.; Jafari, S.M. Lipid nano scale cargos for the protection and delivery of food bioactive ingredients and nutraceuticals. Trends Food Sci. Technol. 2018, 74, 132–146.
  35. Karthik, P.; Anandharamakrishnan, C. Fabrication of a nutrient delivery system of docosahexaenoic acid nanoemulsions via high energy techniques. RSC Adv. 2016, 6, 3501–3513.
  36. Galvão, K.C.S.; Vicente, A.A.; Sobral, P.J.A. Development, Characterization, and Stability of O/W Pepper Nanoemulsions Produced by High-Pressure Homogenization. Food Bioprocess Technol. 2017, 11, 355–367.
  37. Ma, P.; Zeng, Q.; Tai, K.; He, X.; Yao, Y.; Hong, X.; Yuan, F. Preparation of curcumin-loaded emulsion using high pressure homogenization: Impact of oil phase and concentration on physicochemical stability. LWT Food Sci. Technol. 2017, 84, 34–46.
  38. Dey, T.K.; Koley, H.; Ghosh, M.; Dey, S.; Dhar, P. Effects of nano-sizing on lipid bioaccessibility and ex vivo bioavailability from EPA-DHA rich oil in water nanoemulsion. Food Chem. 2019, 275, 135–142.
  39. Llinares, R.; Santos, J.; Trujillo-Cayado, L.A.; Ramírez, P.; Muñoz, J. Enhancing rosemary oil-in-water microfluidized nanoemulsion properties through formulation optimization by response surface methodology. LWT Food Sci. Technol. 2018, 97, 370–375.
  40. Karthik, P.; Anandharamakrishnan, C. Enhancing omega-3 fatty acids nanoemulsion stability and in-vitro digestibility through emulsifiers. J. Food Eng. 2016, 187, 92–105.
  41. Raviadaran, R.; Chandran, D.; Shin, L.H.; Manickam, S. Optimization of palm oil in water nano-emulsion with curcumin using microfluidizer and response surface methodology. LWT Food Sci. Technol. 2018, 96, 58–65.
  42. Liu, F.; Zhu, Z.; Ma, C.; Luo, X.; Bai, L.; Decker, E.A.; Gao, Y.; McClements, D.J. Fabrication of Concentrated Fish Oil Emulsions Using Dual-Channel Microfluidization: Impact of Droplet Concentration on Physical Properties and Lipid Oxidation. J. Agric. Food. Chem. 2016, 64, 9532–9541.
  43. Kumar, R.; Kaur, K.; Uppal, S.; Mehta, S.K. Ultrasound processed nanoemulsion: A comparative approach between resveratrol and resveratrol cyclodextrin inclusion complex to study its binding interactions, antioxidant activity and UV light stability. Ultrason. Sonochem. 2017, 37, 478–489.
  44. Moghimi, R.; Aliahmadi, A.; Rafati, H.; Abtahi, H.R.; Amini, S.; Feizabadi, M.M. Antibacterial and anti-biofilm activity of nanoemulsion of Thymus daenensis oil against multi-drug resistant Acinetobacter baumannii. J. Mol. Liq. 2018, 265, 765–770.
  45. McClements, D.J. Edible nanoemulsions: Fabrication, properties, and functional performance. Soft Matter 2011, 7, 2297–2316.
  46. Arancibia, C.; Miranda, M.; Matiacevich, S.; Troncoso, E. Physical properties and lipid bioavailability of nanoemulsion-based matrices with different thickening agents. Food Hydrocoll. 2017, 73, 243–254.
  47. Chen, E.; Cao, L.; McClements, D.J.; Liu, S.; Li, B.; Li, Y. Enhancement of physicochemical properties of whey protein-stabilized nanoemulsions by interfacial cross-linking using cinnamaldehyde. Food Hydrocoll. 2018, 77, 976–985.
  48. Bai, L.; Liu, F.; Xu, X.; Huan, S.; Gu, J.; McClements, D.J. Impact of polysaccharide molecular characteristics on viscosity enhancement and depletion flocculation. J. Food Eng. 2017, 207, 35–45.
  49. Li, P.-H.; Lu, W.-C. Effects of storage conditions on the physical stability of d-limonene nanoemulsion. Food Hydrocoll. 2016, 53, 218–224.
  50. Bai, L.; McClements, D.J. Formation and stabilization of nanoemulsions using biosurfactants: Rhamnolipids. J. Colloid Interface Sci. 2016, 479, 71–79.
  51. Wooster, T.J.; Labbett, D.; Sanguansri, P.; Andrews, H. Impact of microemulsion inspired approaches on the formation and destabilisation mechanisms of triglyceride nanoemulsions. Soft Matter 2016, 12, 1425–1435.
  52. Shu, G.; Khalid, N.; Chen, Z.; Neves, M.A.; Barrow, C.J.; Nakajima, M. Formulation and characterization of astaxanthin-enriched nanoemulsions stabilized using ginseng saponins as natural emulsifiers. Food Chem. 2018, 255, 67–74.
  53. Thompson, K.L.; Derry, M.J.; Hatton, F.L.; Armes, S.P. Long-Term Stability of n-Alkane-in-Water Pickering Nanoemulsions: Effect of Aqueous Solubility of Droplet Phase on Ostwald Ripening. Langmuir 2018, 34, 9289–9297.
  54. Ryu, V.; McClements, D.J.; Corradini, M.G.; McLandsborough, L. Effect of ripening inhibitor type on formation, stability, and antimicrobial activity of thyme oil nanoemulsion. Food Chem. 2018, 245, 104–111.
  55. Walker, R.M.; Gumus, C.E.; Decker, E.A.; McClements, D.J. Improvements in the formation and stability of fish oil-in-water nanoemulsions using carrier oils: MCT, thyme oil, & lemon oil. J. Food Eng. 2017, 211, 60–68.
  56. McClements, D.; Decker, E. Lipid oxidation in oil-in-water emulsions: Impact of molecular environment on chemical reactions in heterogeneous food systems. J. Food Sci. 2000, 65, 1270–1282.
  57. Park, H.; Mun, S.; Kim, Y.R. UV and storage stability of retinol contained in oil-in-water nanoemulsions. Food Chem. 2019, 272, 404–410.
  58. Powell, K.C.; Damitz, R.; Chauhan, A. Relating emulsion stability to interfacial properties for pharmaceutical emulsions stabilized by Pluronic F68 surfactant. Int. J. Pharm. 2017, 521, 8–18.
  59. Wooster, T.J.; Golding, M.; Sanguansri, P. Impact of oil type on nanoemulsion formation and Ostwald ripening stability. Langmuir 2008, 24, 12758–12765.
  60. Weiss, J.; Takhistov, P.; McClements, D.J. Functional Materials in Food Nanotechnology. J. Food Sci. 2006, 71, R107–R116.
  61. Soukoulis, C.; Tsevdou, M.; Andre, C.M.; Cambier, S.; Yonekura, L.; Taoukis, P.S.; Hoffmann, L. Modulation of chemical stability and in vitro bioaccessibility of beta-carotene loaded in kappa-carrageenan oil-in-gel emulsions. Food Chem. 2017, 220, 208–218.
  62. Grossmann, R.E.; Tangpricha, V. Evaluation of vehicle substances on vitamin D bioavailability: A systematic review. Mol. Nutr. Food Res. 2010, 54, 1055–1061.
  63. Ziani, K.; Fang, Y.; McClements, D.J. Encapsulation of functional lipophilic components in surfactant-based colloidal delivery systems: Vitamin E, vitamin D, and lemon oil. Food Chem. 2012, 134, 1106–1112.
  64. Akanbi, T.O.; Barrow, C.J. Candida antarctica lipase A effectively concentrates DHA from fish and thraustochytrid oils. Food Chem. 2017, 229, 509–516.
  65. Lane, K.E.; Li, W.; Smith, C.J.; Derbyshire, E.J. The development of vegetarian omega-3 oil in water nanoemulsions suitable for integration into functional food products. J. Funct. Foods 2016, 23, 306–314.
  66. Mazza, M.; Pomponi, M.; Janiri, L.; Bria, P.; Mazza, S. Omega-3 fatty acids and antioxidants in neurological and psychiatric diseases: An overview. Prog. Neuropsychopharmacol. Biol. Psychiatry 2007, 31, 12–26.
  67. Lohith Kumar, D.H.; Sarkar, P. Encapsulation of bioactive compounds using nanoemulsions. Environ. Chem. Lett. 2017, 16, 59–70.
  68. Burt, S. Essential oils: Their antibacterial properties and potential applications in foods—A review. Int. J. Food Microbiol. 2004, 94, 223–253.
  69. Hyldgaard, M.; Mygind, T.; Meyer, R.L. Essential Oils in Food Preservation: Mode of Action, Synergies, and Interactions with Food Matrix Components. Front. Microbiol. 2012, 3, 12.
  70. Xue, J.; Davidson, P.M.; Zhong, Q. Antimicrobial activity of thyme oil co-nanoemulsified with sodium caseinate and lecithin. Int. J. Food Microbiol. 2015, 210, 1–8.
  71. Ma, Q.; Davidson, P.M.; Zhong, Q. Nanoemulsions of thymol and eugenol co-emulsified by lauric arginate and lecithin. Food Chem. 2016, 206, 167–173.
  72. Sharma, A.; Sharma, N.K.; Srivastava, A.; Kataria, A.; Dubey, S.; Sharma, S.; Kundu, B. Clove and lemongrass oil based non-ionic nanoemulsion for suppressing the growth of plant pathogenic Fusarium oxysporum f.sp. lycopersici. Ind. Crops Prod. 2018, 123, 353–362.
  73. Yang, Y.; Zhao, C.; Tian, G.; Lu, C.; Li, C.; Bao, Y.; Tang, Z.; McClements, D.J.; Xiao, H.; Zheng, J. Characterization of physical properties and electronic sensory analyses of citrus oil-based nanoemulsions. Food Res. Int. 2018, 109, 149–158.
  74. Öztürk, B. Nanoemulsions for food fortification with lipophilic vitamins: Production challenges, stability, and bioavailability. Eur. J. Lipid Sci. Technol. 2017, 119, 1500539.
  75. Katouzian, I.; Esfanjani, A.F.; Jafari, S.M.; Akhavan, S. Formulation and application of a new generation of lipid nano-carriers for the food bioactive ingredients. Trends Food Sci. Technol. 2017, 68, 14–25.
  76. Ji, J.; Zhang, J.; Chen, J.; Wang, Y.; Dong, N.; Hu, C.; Chen, H.; Li, G.; Pan, X.; Wu, C. Preparation and stabilization of emulsions stabilized by mixed sodium caseinate and soy protein isolate. Food Hydrocoll. 2015, 51, 156–165.
  77. Kadappan, A.S.; Guo, C.; Gumus, C.E.; Bessey, A.; Wood, R.J.; McClements, D.J.; Liu, Z. The Efficacy of Nanoemulsion-Based Delivery to Improve Vitamin D Absorption: Comparison of In Vitro and In Vivo Studies. Mol. Nutr. Food Res. 2018, 62, 1700836.
  78. Schoener, A.L.; Zhang, R.; Lv, S.; Weiss, J.; McClements, D.J. Fabrication of plant-based vitamin D3-fortified nanoemulsions: Influence of carrier oil type on vitamin bioaccessibility. Food Funct. 2019, 10, 1826–1835.
  79. Lv, S.; Gu, J.; Zhang, R.; Zhang, Y.; Tan, H.; McClements, D.J. Vitamin E Encapsulation in Plant-Based Nanoemulsions Fabricated Using Dual-Channel Microfluidization: Formation, Stability, and Bioaccessibility. J. Agric. Food. Chem. 2018, 66, 10532–10542.
  80. Moradi, S.; Anarjan, N. Preparation and characterization of alpha-tocopherol nanocapsules based on gum Arabic-stabilized nanoemulsions. Food Sci. Biotechnol. 2019, 28, 413–421.
  81. Campani, V.; Biondi, M.; Mayol, L.; Cilurzo, F.; Pitaro, M.; de Rosa, G. Development of nanoemulsions for topical delivery of vitamin K1. Int. J. Pharm. 2016, 511, 170–177.
  82. Assadpour, E.; Jafari, S.M. A systematic review on nanoencapsulation of food bioactive ingredients and nutraceuticals by various nanocarriers. Crit. Rev. Food Sci. Nutr. 2018, 59, 3129–3151.
  83. Kumar, D.D.; Mann, B.; Pothuraju, R.; Sharma, R.; Bajaj, R.; Minaxi, M. Formulation and characterization of nanoencapsulated curcumin using sodium caseinate and its incorporation in ice cream. Food Funct. 2016, 7, 417–424.
  84. Zheng, B.; Peng, S.; Zhang, X.; McClements, D.J. Impact of Delivery System Type on Curcumin Bioaccessibility: Comparison of Curcumin-Loaded Nanoemulsions with Commercial Curcumin Supplements. J. Agric. Food. Chem. 2018, 66, 10816–10826.
  85. Sugasini, D.; Lokesh, B.R. Curcumin and linseed oil co-delivered in phospholipid nanoemulsions enhances the levels of docosahexaenoic acid in serum and tissue lipids of rats. Prostaglandins Leukot. Essent. Fat. Acids 2017, 119, 45–52.
  86. Silva, H.D.; Beldíková, E.; Poejo, J.; Abrunhosa, L.; Serra, A.T.; Duarte, C.M.M.; Brányik, T.; Cerqueira, M.A.; Pinheiro, A.C.; Vicente, A.A. Evaluating the effect of chitosan layer on bioaccessibility and cellular uptake of curcumin nanoemulsions. J. Food Eng. 2019, 243, 89–100.
  87. Singh, G.; Pai, R.S. Trans-resveratrol self-nano-emulsifying drug delivery system (SNEDDS) with enhanced bioavailability potential: Optimization, pharmacokinetics and in situ single pass intestinal perfusion (SPIP) studies. Drug Deliv. 2015, 22, 522–530.
  88. Son, H.-Y.; Lee, M.-S.; Chang, E.; Kim, S.-Y.; Kang, B.; Ko, H.; Kim, I.-H.; Zhong, Q.; Jo, Y.-H.; Kim, C.-T. Formulation and Characterization of Quercetin-loaded Oil in Water Nanoemulsion and Evaluation of Hypocholesterolemic Activity in Rats. Nutrients 2019, 11, 244.
  89. De Carli, C.; Moraes-Lovison, M.; Pinho, S.C. Production, physicochemical stability of quercetin-loaded nanoemulsions and evaluation of antioxidant activity in spreadable chicken pâtés. LWT Food Sci. Technol. 2018, 98, 154–161.
  90. Rabelo, C.A.S.; Taarji, N.; Khalid, N.; Kobayashi, I.; Nakajima, M.; Neves, M.A. Formulation and characterization of water-in-oil nanoemulsions loaded with acai berry anthocyanins: Insights of degradation kinetics and stability evaluation of anthocyanins and nanoemulsions. Food Res. Int. 2018, 106, 542–548.
  91. Peng, Y.; Meng, Q.; Zhou, J.; Chen, B.; Xi, J.; Long, P.; Zhang, L.; Hou, R. Nanoemulsion delivery system of tea polyphenols enhanced the bioavailability of catechins in rats. Food Chem. 2018, 242, 527–532.
  92. Santos, D.T.; Meireles, M.A.A. Carotenoid pigments encapsulation: Fundamentals, techniques and recent trends. Open Chem. Eng. J. 2010, 4, 42–50.
  93. Palafox-Carlos, H.; Ayala-Zavala, J.F.; González-Aguilar, G.A. The Role of Dietary Fiber in the Bioaccessibility and Bioavailability of Fruit and Vegetable Antioxidants. J. Food Sci. 2011, 76, R6–R15.
  94. Fan, Y.; Yi, J.; Zhang, Y.; Wen, Z.; Zhao, L. Physicochemical stability and in vitro bioaccessibility of β-carotene nanoemulsions stabilized with whey protein-dextran conjugates. Food Hydrocoll. 2017, 63, 256–264.
  95. Yi, J.; Zhang, Y.; Liang, R.; Zhong, F.; Ma, J. Beta-Carotene Chemical Stability in Nanoemulsions Was Improved by Stabilized with Beta-Lactoglobulin–Catechin Conjugates through Free Radical Method. J. Agric. Food. Chem. 2014, 63, 297–303.
  96. Meng, Q.; Long, P.; Zhou, J.; Ho, C.T.; Zou, X.; Chen, B.; Zhang, L. Improved absorption of beta-carotene by encapsulation in an oil-in-water nanoemulsion containing tea polyphenols in the aqueous phase. Food Res. Int. 2019, 116, 731–736.
  97. Sotomayor-Gerding, D.; Oomah, B.D.; Acevedo, F.; Morales, E.; Bustamante, M.; Shene, C.; Rubilar, M. High carotenoid bioaccessibility through linseed oil nanoemulsions with enhanced physical and oxidative stability. Food Chem. 2016, 199, 463–470.
  98. Liu, X.; Zhang, R.; McClements, D.J.; Li, F.; Liu, H.; Cao, Y.; Xiao, H. Nanoemulsion-Based Delivery Systems for Nutraceuticals: Influence of Long-Chain Triglyceride (LCT) Type on In Vitro Digestion and Astaxanthin Bioaccessibility. Food Biophys. 2018, 13, 412–421.
  99. Zhong, J.; Wang, Q.; Qin, X. Improving the stability of phosphatidylcholine-enhanced nanoemulsions using octenyl succinic anhydride-modified starch. Int. J. Biol. Macromol. 2018, 120, 1500–1507.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Nanoscience & Nanotechnology
Contributor MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Qin Wang
View Times: 1.4K
Revisions: 2 times (View History)
Update Date: 22 Dec 2021
Table of Contents
    1000/1000
    Hot Most Recent
    Video Production Service
    Feedback