Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Twin-Related Grain Boundary Engineering and Its Applications
The main idea of grain boundary engineering (GBE) evolves from the concept of “grain boundaries (GBs) design and control” proposed by Watanabe. In addition, after nearly 50 years of development, GBE has emerged as a mature method that can be applied to a variety of metallic materials, such as copper alloys, nickel-based alloys, austenitic stainless steels, and lead alloys.
  • 465
  • 03 Feb 2023
Topic Review
Twin Transition through Implementation of Industry 4.0 Technologies
Key Enabling Technologies (KET) support the adoption of Industry 4.0 (I4.0) and are also considered the main drivers of the Circular Economy (CE) transition. In this respect, the guidelines and real use cases to inspire enterprises and industry to lead the twin digital and green transition are still poor.
  • 662
  • 14 Dec 2021
Topic Review
Twelve Principles of Green Tribology
Sustainability has become of paramount importance, as evidenced by the increasing number of norms and regulations concerning various sectors. Due to its intrinsic trans-sectorial nature, tribology has drawn the attention of the supporters of sustainability. This discipline allows the environmental, economic, and social impacts to be decreased in a wide range of applications following the same strategies. In 2010, Nosonovsky and Bhushan drew up 12 approaches based on the 12 principles of green chemistry and the 12 principles of green engineering, defining the “12 principles of green tribology.”
  • 641
  • 01 Jul 2022
Topic Review
Tutedhara
A tutedhara (Nepali) or jahru (Newari) is a traditional drinking fountain found in Nepal. It is a water reservoir built out of stone with a tap that can be opened and closed. These structures are either free-standing or integrated into the wall of another building. They depend on a water well or a dhunge dhara to be filled. Only a few of them are in use today, but some of the stone parts have been put to other uses, and there are contemporary equivalents. The best known tutedhara is the one built into a wall in the royal palace on Kathmandu Durbar Square. It is inscribed with a poem dedicated to the goddess Kali, written in fifteen different languages.
  • 505
  • 02 Nov 2022
Topic Review
Turning and Sensing System for Pressure Ulcers Prevention
Pressure ulcers (PU) are one of the most frequent hazards of long-term bedridden patients. With the continuous increase of aging, the number of long-term bedridden disabled and semi-disabled elderly people is increasing. At the same time, there is a serious shortage of professional pressure ulcer nursing staff.
  • 320
  • 20 Dec 2021
Topic Review
Turbulence Simulation Approaches
Turbulent flow can be numerically resolved with different levels of accuracy. Many numerical approaches for solving turbulence have been proposed, such as the Reynolds-Averaged Navier–Stokes (RANS), the Large Eddy Simulation (LES), and Direct Numerical Simulation (DNS) approaches. Among these numerical methods, the RANS approach, specifically the Eddy Viscosity Model (EVM), is widely used for calculating turbulent flows thanks to its relatively high accuracy in predicting the mean flow features and its more limited computational demands. However, this approach suffers from several weaknesses, e.g., compromised accuracy and uncertainties due to assumptions in the model construction and insufficient incorporation of the fluid physics. In the LES approach, the whole eddy range is separated into two parts, namely, the large-scale eddy and subgrid-scale (SGS) eddy. The former can be directly resolved, while the latter is computed using the SGS model. As the computing power rapidly increases, this approach is extensively used to study turbulence physics and to resolve low-to-medium Reynolds number flows.
  • 1.7K
  • 13 Sep 2021
Topic Review
Turbocharged Direct Injection
Turbocharged direct injection or TDI is a design of turbodiesel engines featuring turbocharging and cylinder-direct fuel injection that was developed and produced by the Volkswagen Group (VW AG). These TDI engines are widely used in all mainstream Volkswagen Group marques of passenger cars and light commercial vehicles made by the company (particularly those sold in Europe). They are also used as marine engines in Volkswagen Marine and Volkswagen Industrial Motor applications. TDI engines installed in 2009 to 2015 model year Volkswagen Group cars sold through 18 September 2015 had an emissions defeat device, which activated emissions controls only during emissions testing. The emissions controls were suppressed otherwise, allowing the TDI engines to exceed legal limits on emissions. VW has admitted to using the illegal device in its TDI diesel cars. In many countries, TDI is a registered trademark of Volkswagen AG. The TDI designation has also been used on vehicles powered by Land Rover-designed diesel engines. These are unrelated to Volkswagen Group engines.
  • 4.4K
  • 08 Nov 2022
Topic Review
Tungsten Inert Gas Welding Process of Dissimilar Metals
Special attention is required when joining two materials with distinct chemical, physical and thermal properties in order to make the joint bond robust and rigid. Welded samples employing ER-309L filler wires had a microstructure consisting of a delta ferrite network in an austenite matrix. The tensile strength experimental results revealed that welding current, followed by GFR, was a highly influential parameter on tensile strength. Weld metals had higher hardness and flexural strength than stainless steel and carbon steel base metals. 
  • 886
  • 15 Jul 2022
Topic Review
Tumor-Specific MRI Biomarkers
Machine learning (ML) and artificial intelligence (AI) have enabled the identification of highly predictive, disease-specific biomarkers. 
  • 423
  • 10 Dec 2021
Topic Review
Tumbling Mills
Tumbling mills have been widely implemented in many industrial sectors for the grinding of bulk materials. They have been used for decades in the production of fines and in the final stages of ore comminution, where optimal levels for the enrichment particles’ sizes are obtained. Even though these ubiquitous machines of relatively simple construction have been subjected to extensive studies, the industry still struggles with a very low energy efficiency of the comminution process. Moreover, obtaining an optimal size for the grinding product particles is crucial for the effectiveness of the following processes and waste production reduction. New, innovative processing methods and machines are being developed to tackle the problem; however, tumbling mills are still most commonly used in all ranges of the industry. Since heavy equipment retrofitting is the most costly approach, process optimization with dedicated models and control systems is the most preferable solution for energy consumption reduction. While the classic technological measurements in mineral processing are well adopted by the industry, nowadays research focuses on new methods of the mill’s internal dynamics analysis and control.
  • 3.8K
  • 19 Jan 2021
  • Page
  • of
  • 677
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback