Topic Review
SpaceX Dragon 2
The SpaceX Dragon 2 is a class of reusable spacecraft developed and manufactured by American aerospace manufacturer SpaceX as the successor to the Dragon cargo spacecraft. It has two variants: Crew Dragon, a human-rated capsule capable of ferrying up to seven astronauts, and Cargo Dragon, an updated replacement for the original Dragon spacecraft. The spacecraft launches atop a Falcon 9 Block 5 rocket and returns to Earth via an ocean splashdown. Unlike its predecessor, the spacecraft can dock itself to the ISS instead of being berthed. Crew Dragon is equipped with an integrated launch escape system (LES) capable of accelerating the vehicle away from the rocket in an emergency at 11.8 m/s2, accomplished by using a set of four side-mounted thruster pods with two SuperDraco engines each. The spacecraft features redesigned solar arrays and a modified outer mold line compared to the original Dragon, and possess new flight computers and avionics. As of March 2020, four Dragon 2 spacecraft have been manufactured (not counting structural test articles that were never airborne). Crew Dragon serves as one of two spacecraft that is expected to transport crews to and from the International Space Station (ISS) under NASA's Commercial Crew Program, the other being the Boeing CST-100 Starliner. It is also expected to be used in flights by American space tourism company Space Adventures and to shuttle tourists to and from Axiom Space's planned space station. Crew Dragon's first non-piloted test flight occurred in March 2019, and its first crewed flight – with astronauts Robert Behnken and Douglas Hurley – occurred in May 2020. This test flight marked the first time a private company launched a crewed orbital spacecraft. Cargo Dragon is expected to supply cargo to the ISS under a Commercial Resupply Services-2 contract with NASA, along with Northrop Grumman Innovation Systems' Cygnus spacecraft and Sierra Nevada Corporation's Dream Chaser spacecraft. The first flight of the Cargo Dragon is planned to launch in October 2020.
  • 3.4K
  • 26 Oct 2022
Topic Review
Anti Urination Devices in Norwich
Anti urination devices were a form of hostile architecture installed in Norwich and the surrounding area in the late 19th century to discourage public urination. The overcrowded and narrow streets of the city centre and a lack of public toilets led to men urinating against the side of buildings, but the installation of new public urinals to address the issue was delayed by disputes over where they were to be sited. Anti urination devices were built in places which suffered particular problems with public urination, and were intended to discourage men from urinating at that spot. Most were built of sloped or curved stone, flint or concrete, and were shaped such that anyone attempting to urinate against the wall would need to stand well away from the wall in public view, hopefully discouraging them from doing so. The slope of the structure meant that should anyone still attempt to urinate against it, the stream of urine would be deflected back onto their feet and legs. A few instead consisted of a spiked metal bar positioned across a corner at the height of a typical man's groin, and were intended to dissuade men from approaching the corner with their genitals exposed. Following improved public toilet provision from the 1890s onwards, the problems caused by the lack of urinals became less of an issue, and anti urination devices ceased to be installed. Although most metal examples were removed during the Second World War, and many others have been demolished in subsequent years, around 30 remain in place in central Norwich with further surviving examples in other parts of East Anglia.
  • 3.4K
  • 07 Oct 2022
Topic Review
Biomimicry
Biomimicry can be defined as the branch of science for developing technology by mimicking nature, where forms and structures of creatures are the basic sources of inspiration to come up with optimized design solutions.
  • 3.4K
  • 12 Mar 2021
Biography
William Boeing
William Edward Boeing (/ˈboʊɪŋ/; October 1, 1881 – September 28, 1956) was an United States aviation pioneer who founded The Boeing Company in 1916. Boeing was born in Detroit, Michigan to Marie M. Ortmann, from Vienna, Austria, and Wilhelm Böing (1846–1890) from Hagen-Hohenlimburg, Germany.[1] From a successful family, Wilhelm Böing emigrated to the United States in 1868 and initia
  • 3.4K
  • 05 Dec 2022
Topic Review
Battery Modelling Techniques
The battery modelling (BM) problem is a constrained, multi-dimensional, mixed variable, non-convex, non-linear optimisation problem. Many bio-inspired techniques have been successfully employed to estimate the battery parameters. When bio-inspired algorithms are implemented for COM to extract parameters in real time, then they are called grey box models.
  • 3.3K
  • 28 Oct 2021
Topic Review
Direct and Indirect Solar Gain Systems
The energy crisis, the risk of interruptions or irregular supplies of conventional energy carriers, and the need to protect the environment stimulate the search for new solutions to improve the heat balance of buildings with the use of solar energy. Based on the criterion of the storage, distribution, and discharge time of stored heat, passive solar gain solutions can be divided into direct and indirect solar gain systems.
  • 3.3K
  • 15 Dec 2022
Topic Review
Cathode Ray Tube
The cathode ray tube (CRT) is a vacuum tube that contains one or more electron guns and a phosphorescent screen, and is used to display images. It modulates, accelerates, and deflects electron beam(s) onto the screen to create the images. The images may represent electrical waveforms (oscilloscope), pictures (television, computer monitor), radar targets, or other phenomena. CRTs have also been used as memory devices, in which case the visible light emitted from the fluorescent material (if any) is not intended to have significant meaning to a visual observer (though the visible pattern on the tube face may cryptically represent the stored data). In television sets and computer monitors, the entire front area of the tube is scanned repetitively and systematically in a fixed pattern called a raster. An image is produced by controlling the intensity of each of the three electron beams, one for each additive primary color (red, green, and blue) with a video signal as a reference. In all modern CRT monitors and televisions, the beams are bent by magnetic deflection, a varying magnetic field generated by coils and driven by electronic circuits around the neck of the tube, although electrostatic deflection is commonly used in oscilloscopes, a type of electronic test instrument. A CRT is constructed from a glass envelope which is large, deep (i.e., long from front screen face to rear end), fairly heavy, and relatively fragile. The interior of a CRT is evacuated to approximately 0.01 pascals (9.9×10−8 atm) to 133 nanopascals (1.31×10−12 atm), evacuation being necessary to facilitate the free flight of electrons from the gun(s) to the tube's face. The fact that it is evacuated makes handling an intact CRT potentially dangerous due to the risk of breaking the tube and causing a violent implosion that can hurl shards of glass at great velocity. As a matter of safety, the face is typically made of thick lead glass so as to be highly shatter-resistant and to block most X-ray emissions, particularly if the CRT is used in a consumer product. Since the late 2000s, CRTs have been largely superseded by newer "flat panel" display technologies such as LCD, plasma display, and especially OLED displays, which in the case of LCD and OLED displays have lower manufacturing costs and power consumption, as well as significantly less weight and bulk. Flat panel displays can also be made in very large sizes; whereas 38 to 40 in (97 to 102 cm) was about the largest size of a CRT television, flat panels are available in 60 in (150 cm) and larger sizes.
  • 3.3K
  • 02 Dec 2022
Topic Review
CO2 Separation Techniques
Energy plants, industries, as well as other sources of carbon dioxide (CO2) result in global warming and affect the planet. CO2 is separated from flue gas during combustion using a variety of advanced separation techniques. There are several techniques involved, such as absorption, adsorption, chemical looping, membrane separation, and cryogenics.
  • 3.3K
  • 13 Dec 2022
Topic Review
Material Extrusion Additive Manufacturing of Metal
Material extrusion additive manufacturing of metal (metal MEX), which is one of the 3D printing processes, has gained more interests because of its simplicity and economics. Metal MEX process is similar to the conventional metal injection moulding (MIM) process, consisting of feedstock preparation of metal powder and polymer binders, layer-by-layer 3D printing (metal MEX) or injection (MIM) to create green parts, debinding to remove the binders and sintering to create the consolidated metallic parts.
  • 3.3K
  • 02 Jun 2022
Topic Review
AI-Based and Big Data Analytics on Urban Planning
In order to enable a holistic approach to design and planning, there is a need to integrate those data sources and combine them with other more traditional methods of urban assessment. At the same time, there are still various concerns about big data analytics based on AI-related tools connected, for example, with the accessibility to and accuracy of big data, as well as the limitations of different types of AI-based tools which do not permit this kind of analytics to fully replace traditional urban planning analyses. In terms of technological change, the application of big data in design and planning may greatly support traditional planning methods and provide conditions for innovation; however, due to its limitations, it can only enrich but in no way replace traditional urban studies.
  • 3.3K
  • 03 Dec 2021
  • Page
  • of
  • 678
Video Production Service