Topic Review
Architecture of Dima System
One of the most recent manifestations of avionics system is Distributed Integrated Modular Avionics (DIMA).  The study of DIMA architecture is essential when considering two levels of mappings, that is (1) software modules to hardware components, and (2) hardware components to installation locations. This entry describes the hierarchical design of DIMA, including system layer, hardware layer and installation layer that are linked with a group of constraints and quality measures.
  • 1.9K
  • 26 Apr 2020
Topic Review
Photovoltaic Module Degradation
An evaluation of the degradation effects on photovoltaic modules is essential to minimise uncertainties in the system operation. Bifacial photovoltaic technology is attracting attention due to the capacity of generating energy from the front and rear sides. The term degradation is defined as a gradual deterioration of the characteristics of a material, component, or system. This deterioration may cause an impact on the system capacity to operate within the expected limits and therefore impact directly on their operating conditions.
  • 1.9K
  • 07 Dec 2021
Topic Review
ThinkCentre M Series
The M-series of desktops are part of Lenovo's ThinkCentre product line. Formerly an IBM brand, Lenovo acquired the ThinkCentre desktop brand following its purchase of IBM's Personal Computing Division (PCD) in 2005. Following its acquisition of IBM's PCD, Lenovo has released M-series desktops in multiple form factors, ranging from traditional tower, to small form factor, and all-in-ones (AIOs).
  • 1.9K
  • 02 Nov 2022
Topic Review
Radeon HD 5000 Series
The Evergreen series is a family of GPUs developed by Advanced Micro Devices for its Radeon line under the ATI brand name. It was employed in Radeon HD 5000 graphics card series and competed directly with Nvidia's GeForce 400 Series.
  • 1.9K
  • 17 Nov 2022
Topic Review
Air Mass
In astronomy, air mass or airmass is a measure of the amount of air along the line of sight when observing a star or other celestial source from below Earth's atmosphere (Green 1992). It is formulated as the integral of air density along the light ray. As it penetrates the atmosphere, light is attenuated by scattering and absorption; the thicker atmosphere through which it passes, the greater the attenuation. Consequently, celestial bodies when nearer the horizon appear less bright than when nearer the zenith. This attenuation, known as atmospheric extinction, is described quantitatively by the Beer–Lambert law. "Air mass" normally indicates relative air mass, the ratio of absolute air masses (as defined above) at oblique incidence relative to that at zenith. So, by definition, the relative air mass at the zenith is 1. Air mass increases as the angle between the source and the zenith increases, reaching a value of approximately 38 at the horizon. Air mass can be less than one at an elevation greater than sea level; however, most closed-form expressions for air mass do not include the effects of the observer's elevation, so adjustment must usually be accomplished by other means. Tables of air mass have been published by numerous authors, including Bemporad (1904), Allen (1976), and Kasten and Young (1989).
  • 1.9K
  • 11 Oct 2022
Topic Review
Remote Sensing Methods for Flood Prediction
Floods are a major cause of loss of lives, destruction of infrastructure, and massive damage to a country’s economy. Floods, being natural disasters, cannot be prevented completely; therefore, precautionary measures must be taken by the government, concerned organizations such as the United Nations Office for Disaster Risk Reduction and Office for the coordination of Human Affairs, and the community to control its disastrous effects. Floods are uncertain depending on several climatic and environmental factors, and therefore are difficult to predict. A classification framework is presented which classifies the remote sensing technologies being used for flood prediction into three types, which are: multispectral, radar, and light detection and ranging (LIDAR). 
  • 1.9K
  • 21 Mar 2022
Topic Review
Enabling Technologies in Intermodal Freight Transport
Enabling technologies have wide application in intermodal freight transport (IFT). Their application is observed on components of IFT including, in ports, terminals, transport services, and loading units. Several enabling technologies such as wireless communication technologies, sensors, positioning technology, and web-based platforms are highly utilized in intermodal freight transport globally. In contrast, electronic data interchange (EDI), wireless communication technologies, and web-based platforms also have potential applications in low-income countries, and their adoption should be studied further. 
  • 1.9K
  • 17 Feb 2022
Topic Review
Additive Manufacturing Technology in Railway Infrastructure Systems
Additive manufacturing technologies, well known as three-dimensional printing (3DP) technologies, have been applied in many industrial fields, including aerospace, automobiles, shipbuilding, civil engineering and nuclear power. However, despite the high material utilization and the ability to rapidly construct complex shaped structures of 3D printing technologies, the application of additive manufacturing technologies in railway track infrastructure is still at the exploratory stage. 
  • 1.9K
  • 07 Jan 2022
Topic Review
Capital Centre
The Capital Centre (later USAir Arena and US Airways Arena) was an indoor arena in the eastern United States, located in Landover, Maryland, east of Washington, D.C. Opened in late 1973, it closed in 1999, and was demolished in 2002. The seating capacity was 18,756 for basketball and 18,130 for hockey. The elevation at street level was approximately 160 feet (50 m) above sea level. The U.S. Census Bureau defined the land, later occupied by The Boulevard at the Capital Centre, as being in the Mitchellville census-designated place as of the 1990 U.S. Census, while in the 2000 U.S. Census the area was placed in the Lake Arbor CDP.
  • 1.9K
  • 28 Nov 2022
Topic Review
Complementary Foods
Food safety is imperative, especially for infants and young children because of their underdeveloped immune systems. This requires adequate nutritious food with appropriate amounts of macro- and micronutrients. Currently, a well-established system for infant food is enforced by the regulatory bodies, but no clear system exists for complementary food, which is consumed by children from the age of 6 month to 24 months. As the child grows beyond 6 months, the need for nutrients increases, and if the nutritional needs are not fulfilled, it can lead to health problems, such as stunted growth, weak immune system, and cardiovascular diseases. Hence, it is important to have regulatory bodies monitoring complementary food in a similar capacity as is required for infant formula. 
  • 1.9K
  • 23 Sep 2021
  • Page
  • of
  • 649
Video Production Service