Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
3D Printing in Organ-on-a-Chip Platforms
Three-dimensional (3D) in vitro models, such as organ-on-a-chip platforms, are an emerging and effective technology that allows the replication of the function of tissues and organs, bridging the gap amid the conventional models based on planar cell cultures or animals and the complex human system. Hence, they have been increasingly used for biomedical research, such as drug discovery and personalized healthcare. A promising strategy for their fabrication is 3D printing, a layer-by-layer fabrication process that allows the construction of complex 3D structures.
  • 2.5K
  • 21 May 2021
Topic Review
Classification of the Marine Selective Catalytic Reduction Systems
The marine SCR system is mainly composed of a urea solution injection system, mixer, SCR reactor, measurement system, and soot blowing system. The urea solution injection system is composed of a urea storage tank, urea injection pump, nozzle, valve, and pipeline. Additionally, a static mixer is arranged in the exhaust pipe of the marine SCR system to improve the mixing uniformity of exhaust gas and ammonia gas. 
  • 2.5K
  • 18 May 2022
Topic Review
Acrylic Bone Cements
Acrylic bone cements (ABC) are widely used in orthopedics for joint fixation, antibiotic release, and bone defect filling, among others. Most of the commercial ABCs available today consist of two components, one solid, based mainly on poly(methyl methacrylate) (PMMA), and one liquid, based on methyl methacrylate (MMA), which are mixed and, through the polymerization reaction of the monomer, transformed into a hardened cement paste. 
  • 2.5K
  • 22 Dec 2020
Topic Review
Epoxides Cycloaddition for CO2 Utilization
In the present review (10.3390/pr8050548), CO2 cycloaddition can be seen as a reasonably competent alternative to CO2 transformation, offsetting the high value-added nature by extending material use defer CO2 back to the atmosphere when compared to commodities and fuels such as urea, methanol, and methane.
  • 2.5K
  • 27 Aug 2020
Topic Review
Battery Management Systems
The evolving global landscape for electrical distribution and use created a need area for energy storage systems (ESS), making them among the fastest growing electrical power system products.
  • 2.5K
  • 15 Jun 2021
Topic Review
Medical Implantable Antenna Technology
Implantable antennas are mandatory to transfer data from implants to the external world wirelessly. Smart implants can be used to monitor and diagnose the medical conditions of the patient. The dispersion of the dielectric constant of the tissues and variability of organ structures of the human body absorb most of the antenna radiation. 
  • 2.5K
  • 02 Jul 2021
Topic Review
Inspection of Wind Turbine Blades
Wind turbines are known to be the most efficient method of green energy production, and wind turbine blades (WTBs) are known as a key component of the wind turbine system, with a major influence on the efficiency of the entire system. Wind turbine blades have a quite manual production process of composite materials, which induces various types of defects in the blade. Blades are susceptible to the damage developed by complex and irregular loading or even catastrophic collapse and are expensive to maintain. Failure or damage to wind turbine blades not only decreases the lifespan, efficiency, and fault diagnosis capability but also increases safety hazards and maintenance costs.
  • 2.4K
  • 02 Dec 2022
Topic Review
Wireless Sensor Networks Architecture
Wireless sensor networks (WSNs) have taken a giant leap in scale, expanding their applicability to a large variety of technological domains and applications, ranging from the Internet of things (IoT) for smart cities and smart homes to wearable technology healthcare applications, underwater, agricultural and environmental monitoring and many more. This expansion is rapidly growing every passing day in terms of the variety, heterogeneity and the number of devices which such applications support. Data collection is commonly the core application in WSN and IoT networks, which are typically composed of a large variety of devices, some constrained by their resources (e.g., processing, storage, energy) and some by highly diverse demands. Many challenges span all the conceptual communication layers, from the Physical to the Applicational. In addition, the integrated unit architecture and the platform design can be subject to various stringent constraints. For example, size requirements can impose a strict constraint on the device design; low power consumption, low production cost, and self-operation can represent additional constraints.  Accordingly, the device architecture is fundamental and affects many other factors in the system. For example, power supply affects the life span; it also affects transmission range, memory, and processing unit, which in turn can affect the algorithms that can be executed on the device, etc.
  • 2.4K
  • 12 Apr 2022
Topic Review Peer Reviewed
Geometric Design of Suburban Roundabouts
A modern roundabout is an intersection with a circulatory roadway at which the vehicle speed is low, and the traffic is continuous and circulating in one direction around the central island towards the exits at the approach legs. Modern roundabout design is an iterative process that is composed of the following steps: (1) the identification of the roundabout as the optimal traffic solution; (2) the definition of the number of lanes at the intersection based on the required capacity and the level of service; (3) the initial design of the roundabout geometry; (4) design vehicle swept path, the fastest path analysis, and visibility performance checks; and (5) detailed roundabout design if the results of the performance checks are in line with the design recommendations. Initial roundabout geometry design elements are not independent of each other; therefore, care must be taken to provide compatibility between them. An overview and a comparative analysis of the initial geometric design elements for suburban single-lane roundabouts defined in roundabout design guidelines and norms used in Croatia, Austria, France, the Netherlands, Germany, Serbia, and Switzerland is given in this entry.
  • 2.4K
  • 13 Apr 2022
Topic Review
Arms Industry
The arms industry, also known as the defense industry or the arms trade, is a global industry responsible for the manufacturing and sales of weapons and military technology. It consists of a commercial industry involved in the research and development, engineering, production, and servicing of military material, equipment, and facilities. Arms-producing companies, also referred to as arms dealers, defence contractors, or as the military industry, produce arms for the armed forces of states and civilians. Departments of government also operate in the arms industry, buying and selling weapons, munitions and other military items. An arsenal is a place where arms and ammunition are made, maintained and repaired, stored, or issued, in any combination, whether privately or publicly owned. Products include guns, artillery, ammunition, missiles, military aircraft, military vehicles, ships, electronic systems, night vision devices, holographic weapon sights, laser rangefinders, laser sights, hand grenades, landmines and more. The arms industry also provides other logistical and operational support. Stockholm International Peace Research Institute (SIPRI) estimated that 2012 military expenditures were roughly $1.8 trillion. This represents a relative decline from 1990 when military expenditures made up 4% of world GDP. Part of the money goes to the procurement of military hardware and services from the military industry. The combined arms sales of the top 100 largest arms-producing companies amounted to an estimated $395 billion in 2012 according to SIPRI. In 2004 over $30 billion were spent in the international arms trade (a figure that excludes domestic sales of arms). According to SIPRI, the volume of international transfers of major weapons in 2010–14 was 16 per cent higher than in 2005–2009. The five biggest exporters in 2010–2014 were the United States, Russia, China, Germany and France, and the five biggest importers were India, Saudi Arabia, China, the United Arab Emirates and Pakistan. Many industrialized countries have a domestic arms-industry to supply their own military forces. Some countries also have a substantial legal or illegal domestic trade in weapons for use by its citizens, primarily for self-defence, hunting or sporting purposes. Illegal trade in small arms occurs in many countries and regions affected by political instability. The Small Arms Survey estimates that 875 million small arms circulate worldwide, produced by more than 1,000 companies from nearly 100 countries. Contracts to supply a given country's military are awarded by governments, making arms contracts of substantial political importance. The link between politics and the arms trade can result in the development of what U.S. President Dwight D. Eisenhower described as a military-industrial complex, where the armed forces, commerce, and politics become closely linked, similarly to the European multilateral defence procurement. Various corporations, some publicly held, others private, bid for these contracts, which are often worth many billions of dollars. Sometimes, as with the contract for the international Joint Strike Fighter, a competitive tendering process takes place, with the decision made on the merits of the designs submitted by the companies involved. Other times, no bidding or competition takes place.
  • 2.4K
  • 19 Oct 2022
  • Page
  • of
  • 649
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback