Topic Review
High-Temperature Shape Memory Alloys
With the aim to improve the strength of high-temperature shape memory alloys, multi-component alloys, including medium- and high-entropy alloys, have been investigated and proposed as new structural materials. Notably, it was discovered that the martensitic transformation temperature could be controlled through a combination of the constituent elements and alloys with high austenite finish temperatures above 500 °C. The irrecoverable strain decreased in the multi-component alloys compared with the ternary alloys. The repeated thermal cyclic test was effective toward obtaining perfect strain recoveries in multi-component alloys, which could be good candidates for high-temperature shape memory alloys.
  • 2.8K
  • 26 Nov 2020
Topic Review
Friction Stir Processing
Friction stir processing (FSP) is a material processing technique developed in 1999 derived from friction stir welding (FSW). Developed by Mishra et al., this process utilizes localized plastic deformation by rotating a specialized pin through the working piece. 
  • 2.8K
  • 22 Sep 2021
Topic Review
Militarization of Police
The militarization of police is the use of military equipment and tactics by law enforcement officers. This includes the use of armored personnel carriers (APCs), assault rifles, submachine guns, flashbang grenades, grenade launchers, sniper rifles, and SWAT (special weapons and tactics) teams. The militarization of law enforcement is also associated with intelligence agency–style information gathering aimed at the public and political activists and with a more aggressive style of law enforcement. Criminal justice professor Peter Kraska has defined militarization of police as "the process whereby civilian police increasingly draw from, and pattern themselves around, the tenets of militarism and the military model". Observers have noted the militarizing of the policing of protests. Since the 1970s, riot police have fired at protesters using guns with rubber bullets or plastic bullets. Tear gas, which was developed by the United States Army for riot control in 1919, is still widely used against protesters. The use of tear gas in warfare is prohibited by various international treaties that most states have signed; however, its law enforcement or military use for domestic or non-combat situations is permitted. Concerns about the militarization of police have been raised by both ends of the political spectrum in the United States , with both the libertarian Cato Institute and the American Civil Liberties Union (ACLU) voicing criticisms of the practice. The Fraternal Order of Police has spoken out in favor of equipping law enforcement officers with military equipment, claiming that it increases the officers' safety and enables them to protect members of the public and other first responders (e.g., firefighters and emergency medical services personnel). However, a 2017 study showed that police forces which received military equipment were more likely to have violent encounters with the public, regardless of local crime rates. A 2018 study found that militarized police units in the United States were more frequently deployed to communities with large shares of African-Americans, even after controlling for local crime rates. Many countries also have a gendarmerie, which is a military force with law enforcement duties among the civilian population. France classifies some weapons as "intermediary force weapons" such as its LBD 40 refitted version of the Swiss B&T GL06 military grenade launcher, which is used in riot police situations or against individual persons in more specific interventions. While not having the full power of military guns, some weapons are heavier than regular police weaponry and are still lethal. These are often referred to with the "limited lethality" appellation.
  • 2.8K
  • 11 Oct 2022
Topic Review
Fluid Catalytic Cracking
The fluid catalytic cracking (FCC) process is an alternative olefin production technology, with lower CO2 emission and higher energy-saving.
  • 2.8K
  • 23 Feb 2021
Topic Review
Pickering Emulsion Characteristics and Measuring Techniques
Surfactant-based emulsions require high emulsifier concentrations for stability and often rely on multiple additives to address various factors, which makes the surfactant synthesis and utilization of emulsions quite challenging. Pickering emulsions, which utilize solid particles for emulsion stabilization, have emerged as a promising solution for reservoir conformance control.
  • 2.8K
  • 12 Sep 2023
Topic Review
Odor Removal Technologies
Comparing various methods of odor removal, undoubtedly biological methods of pollution degrada-tion have an advantage over others—chemical and physical. This advantage is manifestedmainly in ecological and economic terms. The possibility of using biological methods to remove H2S and NH3, as the most common emitted by the municipal sector companies, was analyzed in terms of their removal efficiency. The method of bio-purification of air in biotrickling filters is more advan-tageous than the others, due to the high effectiveness of VOCs and odors degradation, lack of secondary pollutants, and economic aspects—it is a method competitive to the commonly used air purification method in biofilters.
  • 2.8K
  • 12 Apr 2021
Topic Review
Microgrid Applications
Microgrids need control and management at different levels to allow the inclusion of renewable energy sources. In this paper, a comprehensive literature review is presented to analyse the latest trends in research and development referring to the applications of predictive control in microgrids. As a result of this review, it was found that the application of predictive control techniques on microgrids is performed for the three control levels and with adaptations of the models in order to include uncertainties to improve their performance and dynamics response. In addition, to ensure system stability, but also, at higher control levels, coordinated operation among the microgrid’s components and synchronised and optimised operation with utility grids and electric power markets. Predictive control appears as a very promising control scheme with several advantages for microgrid applications of different control levels.
  • 2.8K
  • 28 Oct 2020
Topic Review
Wearable Stretch Sensors
Wearable sensors are beneficial for continuous health monitoring, movement analysis, rehabilitation, evaluation of human performance. Wearable stretch sensors are increasingly being used for human movement monitoring. The content presented provides a review of wearable stretch sensors as well the design, development and validation of a wearable soft-robotic-stretch sensors. 
  • 2.8K
  • 25 Feb 2021
Topic Review
Power Electronics for EV Charging Stations
This paper proposes a design for the Bidirectional electric vehicle charger which is capable of doing both the Grid to Vehicle and Vehicle to Grid power transfer, and the interaction will be made through an automatic smart energy management system(EMS). A simple power electronics topology is used. The user can adjust the output of this charger by using the control signal provided by the controller. The simulation result obtained shows that it has an interaction between the charger and an Energy Management System(EMS) in a residence
  • 2.7K
  • 13 Dec 2022
Topic Review
Overcurrent Relays and Their Usage
Overcurrent relays (OCR) are used as the main protection device due to their lower cost compared to other types of relays. Overcurrent relays can be divided roughly into two types, judging by their time–current characteristic: definite-time OCRs and inverse-time OCRs.
  • 2.7K
  • 18 Feb 2022
  • Page
  • of
  • 649
Video Production Service