Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Kubota Engines
Kubota engines are diesel and spark ignition engines manufactured by Kubota Corporation. Besides gasoline-fueled for spark ignition engines, the company produces dual fuel, LPG-fueled, and natural-gas-fueled engines as well. The engines are widely used in various forms, such as: agricultural equipments, construction equipments, gensets, tractors, and marine propulsion. Beta Marine, an international company providing marine propulsion engines, uses various Kubota engines for fresh water and sea-going boats of various sizes.
  • 3.1K
  • 03 Nov 2022
Topic Review
Jagdtiger
The Jagdtiger ("Hunting Tiger"; officially designated Panzerjäger Tiger Ausf. B) is a German casemate-type heavy tank destroyer from World War II. It was built upon the slightly lengthened chassis of a Tiger II. Its ordnance inventory designation was Sd.Kfz. 186. The 71-tonne Jagdtiger was the heaviest armored fighting vehicle (AFV) used operationally by any participant nation of WWII and is the heaviest combat vehicle of any type to achieve series production during the conflict. The vehicle was armed with a 128 mm Pak 44 L/55 main gun which was capable of outranging and defeating any tank or AFV fielded by the Allied forces. It saw brief service in small numbers from late 1944 up until the end of the war on both the Western and Eastern Front. Although 150 were ordered, only around eighty were produced. Due to an excessive weight and a significantly underpowered drivetrain system, the Jagdtiger was continuously plagued with various mobility and mechanical problems. At present, three Jagdtigers survive in different museums around the world.
  • 3.1K
  • 17 Oct 2022
Topic Review
Cost–Benefit Analysis for Road Infrastructure Projects
Cost–benefit analysis (CBA) is considered an effective evaluation method for fostering optimal decision-making and ranking of road infrastructures over decades. Eight distinct modelling categories used for CBA implementation were determined, each encompassing three different modelling approaches for capturing the data risk assessment (deterministic or probabilistic), CBA’s parameters interactive behavior (static or dynamic) and the considered economies (microeconomic or macroeconomic). In-depth content analysis led to the interpretation of the current status of extant models and the identification of three main knowledge gaps: the absence of the CBA’s inputs updating into a probabilistic environment, the deficiency of a dynamic interdependent framework and the necessity of homogenous cost datasets for road projects. Future research directions and a conceptual framework for modelling CBA into a microeconomic, probabilistic and dynamic environment are proposed providing decision-makers with new avenues for more reliable CBA modelling.
  • 3.1K
  • 29 Jan 2023
Topic Review
Starship (Spacecraft)
Starship is the fully reusable second stage and space vehicle of the SpaceX BFR "Super Heavy" rocket currently under development by SpaceX. It is a long-duration cargo- and passenger-carrying spacecraft that also serves as the BFR launch vehicle second stage and integrated payload section. Three 9-meter (30 ft)-diameter stainless steel Starship test articles are being built, and one had already begun integrated system testing by March 2019. The Starship test flight rocket—Starhopper—will be used for initial integrated testing of the Raptor rocket engine with a flight-capable propellant structure as well as for low-altitude, low-velocity flight testing of launches and landings. It began hotfire testing in April 2019. Two additional test articles, Starship orbital prototypes, are being built by competing teams in South Texas and along the space coast of Florida. They are planned to be used after mid-2019 for high-altitude, high-velocity testing. Integrated system testing of Starhopper, including the first flight test, began in April 2019. SpaceX is planning to launch commercial payloads using Starship no earlier than 2021.
  • 3.1K
  • 21 Oct 2022
Topic Review
PSA XUD
The PSA XUD is a Diesel engine designed and built by PSA - Peugeot and Citroën. It is an Indirect injection (IDI) engine, that uses a version of the Ricardo Consulting Engineers Ricardo Comet V prechamber cylinder head design. The engine comes in 1.8 L (1,769 cc) N/A, 1.8 Turbo, 1.9 L (1,905 cc) N/A, Turbo, 2.1 12 valve N/A and Turbo and was the predecessor to the HDI range of engines. Early HDi Engines were a PSA design, later 16 valve engines were jointly developed with Ford.
  • 3.1K
  • 28 Oct 2022
Topic Review
Panzer II Variants
The Panzerkampfwagen II (Pz.Kpfw.II) light tank, produced in Germany in the late 1930s and early 1940s had a wide array of variants, both as development of the light tank and for specialised tasks.
  • 3.1K
  • 02 Nov 2022
Topic Review
Datasheet
A datasheet, data sheet, or spec sheet is a document that summarizes the performance and other characteristics of a product, machine, component (e.g., an electronic component), material, subsystem (e.g., a power supply), or software in sufficient detail that allows a buyer to understand what the product is and a design engineer to understand the role of the component in the overall system. Typically, a datasheet is created by the manufacturer and begins with an introductory page describing the rest of the document, followed by listings of specific characteristics, with further information on the connectivity of the devices. In cases where there is relevant source code to include, it is usually attached near the end of the document or separated into another file. Datasheets are created, stored, and distributed via product information management or product data management systems. Depending on the specific purpose, a datasheet may offer an average value, a typical value, a typical range, engineering tolerances, or a nominal value. The type and source of data are usually stated on the datasheet. A datasheet is usually used for commercial or technical communication to describe the characteristics of an item or product. It can be published by the manufacturer to help people choose products or to help use the products. By contrast, a technical specification is an explicit set of requirements to be satisfied by a material, product, or service. The ideal datasheet specifies characteristics in a formal structure, according to a strict taxonomy, that allows the information to be processed by a machine. Such machine readable descriptions can facilitate information retrieval, display, design, testing, interfacing, verification, system discovery, and e-commerce. Examples include Open Icecat data-sheets, transducer electronic data sheets for describing sensor characteristics, and Electronic device descriptions in CANopen or descriptions in markup languages, such as SensorML.
  • 3.1K
  • 01 Nov 2022
Topic Review
Methods for Recycling Heterogenous Catalysts
The rapid separation and efficient recycling of catalysts after a catalytic reaction are considered important requirements along with the high catalytic performances. In this view, although heterogeneous catalysis is generally less efficient if compared to the homogeneous type, it is generally preferred since it benefits from the easy recovery of the catalyst. Recycling of heterogeneous catalysts using traditional methods of separation such as extraction, filtration, vacuum distillation, or centrifugation is tedious and time-consuming. They are uneconomic processes and, hence, they cannot be carried out in the industrial scale.
  • 3.1K
  • 23 Jun 2021
Topic Review
Closed-Loop Supply Chain
A CLSC can be defined as “a supply chain system entailing design and implementation for enhancing the useful value throughout the product life cycle while dynamically extracting value from different returned products”[1].
  • 3.1K
  • 23 Oct 2020
Topic Review
Single Fiber Endoscope
An endoscope is an imaging device made up of a long and thin tube that can be inserted into the hollow openings of the body to image the inner sections in real time and in a less invasive manner.
  • 3.1K
  • 12 Jan 2021
  • Page
  • of
  • 649
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback