Topic Review
Conventional Approaches of Nuclear Magnetic Resonance Statistics
Nuclear magnetic resonance (NMR) measurements combined with chemometrics allow achieving a great amount of information for the identification of potential biomarkers responsible for a precise metabolic pathway. These kinds of data are useful in different fields, ranging from food to biomedical fields, including health science. The investigation of the whole set of metabolites in a sample, representing its fingerprint in the considered condition, is known as metabolomics and may take advantage of different statistical tools. The new frontier is to adopt self-learning techniques to enhance clustering or classification actions that can improve the predictive power over large amounts of data.
  • 679
  • 09 May 2022
Topic Review
Conventional Tools for Neurodegenerative Disease Diagnosis
Conventional approaches in neurodegenerative disease (ND) diagnosis and challenges in clinical routine testing are addressed in order to understand the context of how molecular-based diagnosis techniques can perform in real, in vivo sampling and bioassays for early ND diagnosis.
  • 332
  • 15 May 2023
Topic Review
Conversion of Units of Temperature
This is a collection of temperature conversion formulas and comparisons among eight different temperature scales, several of which have long been obsolete.
  • 229
  • 30 Sep 2022
Topic Review
Copernicus Programme
Copernicus is the European Union's Earth observation programme coordinated and managed by the European Commission in partnership with the European Space Agency (ESA), the EU Member States and EU Agencies. It aims at achieving a global, continuous, autonomous, high quality, wide range Earth observation capacity. Providing accurate, timely and easily accessible information to, among other things, improve the management of the environment, understand and mitigate the effects of climate change, and ensure civil security. The objective is to use vast amount of global data from satellites and from ground-based, airborne and seaborne measurement systems to produce timely and quality information, services and knowledge, and to provide autonomous and independent access to information in the domains of environment and security on a global level in order to help service providers, public authorities and other international organizations improve the quality of life for the citizens of Europe. In other words, it pulls together all the information obtained by the Copernicus environmental satellites, air and ground stations and sensors to provide a comprehensive picture of the "health" of Earth. One of the benefits of the Copernicus Programme is that the data and information produced in the framework of Copernicus are made available free-of-charge to all its users and the public, thus allowing downstream services to be developed. The services offered by Copernicus cover six main interacting themes: atmosphere, marine, land, climate, emergency and security. Copernicus builds upon three components: Its cost during 1998 to 2020 are estimated at 6.7 billion euros with around €4.3bn spent in the period 2014 to 2020 and shared between the EU (66%) and ESA (33%) with benefits of the data to the EU economy estimated at roughly 30 billion euros through 2030. ESA as a main partner has performed much of the design and oversees and co-funds the development of Sentinel missions 1, 2, 3, 4, 5 and 6 with each Sentinel mission consisting of at least 2 satellites and some, such as Sentinel 1, consisting of 4 satellites. They will also provide the instruments for Meteosat Third Generation and MetOp-SG weather satellites of EUMETSAT where ESA and EUMETSAT will also coordinate the delivery of data from upwards of 30 satellites that form the contributing satellite missions to Copernicus.
  • 327
  • 11 Nov 2022
Topic Review
Copper RTD directly fabricated on ceramic-coated stainless-steel tube
Reducing the economic and environmental impact of industrial process may be achieved by the smartisation of different components. In this work, tube smartisation is presented via direct fabrication of a copper (Cu)-based resistive temperature detector (RTD) on their outer surfaces. The testing was carried out between room temperature and 250 °C. For this purpose, copper depositions were studied using mid-frequency (MF) and high-power impulse magnetron sputtering (HiPIMS). Stainless steel tubes with an outside inert ceramic coating were used after giving them a shot blasting treatment. The Cu deposition was performed at around 425 °C to improve adhesion as well as the electrical properties of the sensor. To generate the pattern of the Cu RTD, a photolithography process was carried out. The RTD was then protected from external degradation by a silicon oxide film deposited over it by means of two different techniques: sol–gel dipping technique and reactive magnetron sputtering.
  • 194
  • 25 Jun 2023
Topic Review
Corium (Nuclear Reactor)
Corium, also called fuel-containing material (FCM) or lava-like fuel-containing material (LFCM), is a material that is created in the core of a nuclear reactor during a meltdown accident. It resembles natural lava in its consistency. It consists of a mixture of nuclear fuel, fission products, control rods, structural materials from the affected parts of the reactor, products of their chemical reaction with air, water and steam, and, in the event that the reactor vessel is breached, molten concrete from the floor of the reactor room.
  • 684
  • 28 Oct 2022
Topic Review
Corona
A corona (meaning 'crown' in Latin derived from Ancient Greek 'κορώνη' (korōnè, “garland, wreath”)) is an aura of plasma that surrounds the Sun and other stars. The Sun's corona extends millions of kilometres into outer space and is most easily seen during a total solar eclipse, but it is also observable with a coronagraph. Spectroscopy measurements indicate strong ionization in the corona and a plasma temperature in excess of 1000000 kelvin, much hotter than the surface of the Sun. Light from the corona comes from three primary sources, from the same volume of space. The K-corona (K for kontinuierlich, "continuous" in German) is created by sunlight scattering off free electrons; Doppler broadening of the reflected photospheric absorption lines spreads them so greatly as to completely obscure them, giving the spectral appearance of a continuum with no absorption lines. The F-corona (F for Fraunhofer) is created by sunlight bouncing off dust particles, and is observable because its light contains the Fraunhofer absorption lines that are seen in raw sunlight; the F-corona extends to very high elongation angles from the Sun, where it is called the zodiacal light. The E-corona (E for emission) is due to spectral emission lines produced by ions that are present in the coronal plasma; it may be observed in broad or forbidden or hot spectral emission lines and is the main source of information about the corona's composition.
  • 439
  • 08 Nov 2022
Topic Review
Corona Australis
Corona Australis, Latin for "Southern Crown," is a small constellation in the southern celestial hemisphere. Situated near the celestial equator, it represents a crown or wreath and is associated with various mythological interpretations across different cultures. Despite its modest size, Corona Australis contains several interesting celestial objects.
  • 127
  • 08 Mar 2024
Topic Review
Corona Borealis
Corona Borealis, Latin for "Northern Crown," is a constellation in the northern celestial hemisphere, known for its distinctive semicircular shape resembling a crown. Its counterpart in the southern hemisphere, Corona Australis, shares a similar name and mythological association with crowns but lies on the opposite side of the celestial sphere. 
  • 286
  • 08 Mar 2024
Topic Review
Coronagraph
A coronagraph is a telescopic attachment designed to block out the direct light from a star so that nearby objects – which otherwise would be hidden in the star's bright glare – can be resolved. Most coronagraphs are intended to view the corona of the Sun, but a new class of conceptually similar instruments (called stellar coronagraphs to distinguish them from solar coronagraphs) are being used to find extrasolar planets and circumstellar disks around nearby stars as well as host galaxies in quasars and other similar objects with active galactic nuclei (AGN).
  • 504
  • 23 Nov 2022
  • Page
  • of
  • 118
Video Production Service