The peptide-based gene delivery system, mediated by cell-penetrating peptides (CPPs), has been regarded as a promising non-viral tool for efficient and stable gene transfection into both animal and plant cells. CPPs are short peptides with diverse sequences and functionalities, capable of agitating plasma membrane and entering cells. Various basic, amphipathic, cyclic, and branched CPPs were designed, and modifications of functional groups were performed to enhance DNA interaction and stabilization in transgenesis.
1. Introduction
The current trends in crop yield fall short of meeting the demand, as the global requirement for food is projected to double in the next 30 years
[1]. Modern agriculture is facing major global challenges, such as loss of biodiversity, chemical contamination of soils, plant pests, and diseases
[2], all of which can directly affect plant health and productivity. Genetically modified plants and crops provide one of the solutions to increase global food production with improved gains in yield and resistance to plant diseases or insect pests. Several successful cases of genetically modified plants have conferred phytoprotection against insects, pests, and pathogens, such as overexpression of proteinase inhibitor genes from legumes
[3], recombinant Bt toxic proteins from soil bacteria
Bacillus thuringiensis [4], α-amylase inhibitors, and plant lectins
[5]. In spite of these successful examples, there is a need to develop alternative strategies of phytoprotection.
Transgenic plants are defined as plants containing gene modifications and expressing recombinant proteins or products from foreign genes
[6]. The success of transgenic plants depend on favorable methods of gene delivery. The first transgenic plant was reported in 1983 when an antibiotic-resistant Ti plasmid was delivered into tobacco, mediated by
A. tumefaciens [7]. Subsequently, tremendous gene delivery strategies, such as particle bombardment (biolistics), were applied in plants. Flourishing developments of biotechnology in exogenous nucleic acid delivery have brought a great improvement in transgenic plants
[8][9].
Genetic transformation methods in plants were generally divided into two types: direct and indirect gene delivery methods
[9]. DNAs or RNAs can be introduced into plants either directly or packaged by specific viruses or bacteria, then transferred into plants via an indirect method
[9]. Additional gene delivery classifications include physical, chemical, and biological methods (
Figure 1)
[10]. Physical methods, such as microinjection, biolistics, electroporation, silicon carbide fibers, laser-mediated DNA delivery, sonoporation, hydrodynamic force, etc., facilitate nucleic acids to penetrate cell membrane directly
[11]. The advantages of physical methods for gene delivery are plant- and genome-type independence. Large- or small-sized plasmid DNAs can be delivered by these methods, while DNA transformations in some recalcitrant plants, such as cereals and legumes, are wildly applied
[12]. However, the criticisms of physical methods are irreversible tissue damage and integration of genes into host genomes
[10]. In microinjection and electroporation methods, plant sample preparations become protoplasts or a single cell, and this complicated procedure makes the drawback for transgenic plant applications
[10].
Figure 1. Methodologies of gene delivery in plants. Various methods including physical, chemical, and biological manners were applied in gene delivery. Plant cells were prepared as protoplasts for gene uptake. Plant tissues (callus) and zygotic embryos also served as the transgenic hosts. PEG: polyethylene glycol; DEAE: diethylaminoethanol.
Polyethylene glycol (PEG)-, diethylaminoethanol (DEAE)-dextran-, calcium phosphate-, dendrimer-, and liposome-mediated gene transfers were categorized as chemical methods
[11][13]. Hygromycin resistance gene was introduced into the protoplasts of rice, and these transgenic rice plants generated viable seeds
[14]. The benefits of liposome-mediated nucleic acids delivery include DNA protection from nuclease digestion, as well as suitability for multiple types of plant cells, such as protoplasts and plasmodesmata
[15]. Calcium phosphate is a cheap and easily handled DNA delivery method that possesses economic benefits. DNAs are able to interact with positively charged calcium ions via electrostatics, form precipitates, and enter cells by endocytosis
[11]. Endocytosis is the major route for DNA delivery in chemical method-mediated plant transformation
[16]. However, nucleic acids, which might be digested in lysosomes, and the limitation on plasmid DNA size reduce the potential of application in transgenic plants
[16][17].
2. Cell-Penetrating Peptides (CPPs)
CPPs are short and membrane-active peptides
[18]. In general, macromolecules, such as DNAs, RNAs, and proteins, are impermeable to cell membranes. The cell membrane is a natural barrier to prevent harmful exogenous or pathological molecules from entering the cell freely, and to maintain the osmotic balance within the cell. Some functional proteins are able to enter cells via specific receptors or channels, while nucleic acids alone are generally not
[19]. Not only can CPPs enter cells by themselves, but also deliver various cargoes, including nucleic acids, into living cells
[20]. However, nucleic acids are not the only macromolecules that CPPs are able to deliver. CPPs also can serve as a Trojan horse, while peptides/proteins
[21], nanoparticles
[22], pharmaceutical molecules, and small drugs
[20][23][24] play the role of Achilles. The selectivity and efficiency of drug/molecules delivery are significantly improved when CPPs cooperate with liposomes/micelles
[25][26]. Most CPPs have been shown to be nontoxic, and do not interfere with functionality of the delivered biomacromolecule
[27].
There are various interactions between CPPs and their cargoes. CPPs and cargoes can form complexes with covalent bonds
[28], noncovalent interactions
[18], and covalent- and noncovalent-synchronous linkages
[29]. The potential of bio-membrane penetration in CPPs is amazing. Until now, studies indicated that CPPs were able to penetrate different targets, including mammalian cells
[18], plant cells/tissues
[28][29][30][31][32][33][34][35], rodent skin and intestinal mucosa
[21], prokaryotes
[36][37], fungi
[38], insect cells
[39], paramecia
[40], and rotifers which were individual organisms containing thick cuticles
[41]. Recently, different modifications on CPPs, such as D-form amino acid applications, branches on backbone sequences, cyclic structures alterations, and non-standard amino acid substitutions were designed to increase their internalization efficiency and stability
[18][42][43][44]. Highly cellular penetration efficiencies and non-cytotoxic properties make CPPs an ideal delivery system for therapeutic drugs, gene therapies, and transgenic plants
[21][45][46][47][48].
3. Subcellular Targets for Gene Delivery
CPPs have demonstrated remarkable ability to deliver diverse biomacromolecules into various plant species. The plasmid DNA delivery mediated by CPPs displayed a high potential and efficiency in plant root cells
[49], embryos
[50], and leaf cells
[51] without protoplast preparations. Positively charged CPPs possess the abilities to interact with, condense, and package plasmid DNAs. The combination ratio between CPP and nucleic acid, also called nitrogen (NH
3+)/phosphate (PO
4−) (N/P) ratio
[52], is key to DNA condensation and packaging. It further affects gene delivery efficiency
[49][53]. An optimal N/P ratio makes CPP/DNA complexes more stable and is able to raise gene delivery efficiency. A good transgenic efficiency also depends on other factors, such as long-term stability of CPP/DNA complexes in cytosol, evasion from the endosome–lysosome system, targeted site of gene expression, and DNA releasing from CPP/DNA complexes
[30][34][54][55][56]. The efficiency of cytoplasmic delivery by the predominant endosomal pathway is typically very low. A study showed that glutathione-responsive CPPs are able to escape from endosome entrapment and release DNAs at a higher rate to achieve gene transfer in plants
[30]. Aside from efficiency, targeted delivery is also crucial in transgenic plant development
[57]. Various DNA plasmids were designed and applied to the genes that were successfully achieved for development of transgenic plants (
Table 1). The researchers discussed three major subcellular targets for CPP/DNA complex delivery: nucleus, plastids, and mitochondria.
Table 1. List of various genes applied in transgenic plants.
3.1. Nucleus
Nuclear localization signal (NLS) is a small and basic peptide containing four lysines, one arginine, and several nonpolar residues
[61] commonly found in CPP sequences (
Table 1). Proteins or peptides containing this short signal are recognized by importin, and are transported into nucleus through the classical nuclear import pathway
[61]. MPG, a chimeric CPP composed of HIV glycoprotein 41 and SV40 T antigen, is an example of NLS. NLS enters nucleus not only by itself but also with its cargoes
[62]. According to the chemical and physical properties of NLS, it is considered a cationic peptide
[23]. However, many studies suggested this NLS to be categorized as an amphipathic peptide, because its primary sequence contains both cationic and hydrophobic residues
[45][62]. Fagerlund et al. suggested that lysine/arginine-rich NLS on signal transducers and activators of transcription 1 (STAT1) homodimer proteins and STAT1-STAT2 heterodimer proteins is key to both DNA binding and importin interaction
[63]. Mutations of the conserved arginine/lysine-rich portions were able to prohibit nuclear import. Furthermore, R9-based CPPs (without NLS) affirmed the principal role of arginine in nuclear entry
[64][65]. Both R9-green fluorescent protein (GFP) and NLS-R9-GFP displayed nuclear targeting in mung bean roots
[49]. SR9 and PR9 entered cells via multiple pathways and classical endocytosis, respectively
[18]. However, they all escaped from the endosome–lysosome system and entered nuclei
[65]. Recent data studied by Kurnaeva et al. demonstrated that arginine residues are much more critical than lysines in NLS actions
[66]. Therefore, NLS-tagged CPPs or arginine-rich CPPs play an important role in the nucleus delivery of nucleic acids, and their nuclear targeting abilities dramatically increase successful results in transgenic plants.
3.2. Chloroplasts (Plastids)
Chloroplasts (a.k.a., plastids in plants) contain their own genomes and are the core components for photosynthesis. According to the membrane structure, plastids are divided into two groups: primary and secondary plastids
[67]. Primary plastids are found in most algae and plants, while plankton typically belongs to the category of secondary plastid organisms. Plastid genomes are essential, as genes in plastids regulate not only metabolism of photosynthesis, but also energy transfer and storage
[68]. Plastids also influence the expression of nuclear genes via plastid-to-nucleus signaling pathways, which regulate plastidic and extraplastidic processes to cope with environmental changes
[68].
In recent years, transgenic plastids are gaining more attraction in biotechnology for the following reasons: (1) the genome in plastids is smaller than chromosomes in nuclei, only contains about 150 kb in molecular mass, and is easily manufactured by humans
[69]; (2) a mature chloroplast contains a high copy number of circular double-stranded DNA, which is able to produce large amounts of recombinant proteins, which is very important for vaccine or economic production
[70]; and (3) plastids are the maternal inheritance in most plant species. Plastid genetic engineering, such as in transplastomic plants, manipulates organellar DNA without changing the nuclear genes. Extranuclear genetic engineering prevents genetic pollution from the nucleus and protects wild-type plants or relative wild species
[71].
Macromolecules tagged with a specific signal are essential for organelle-targeted delivery. Chloroplast transit peptides (CTPs, a.k.a. chloroplast-targeting peptides) are special peptides containing 33–35% hydrophobic, 22–23% hydroxylated, and 14–15% positively charged amino acids
[72]. Shen et al. indicated that the most efficient CTPs in rice is RC2, and its sequence also follows the similar percentage of hydrophobic, hydroxylated, and cationic residues
[73]. Thagun et al. successfully combined plasmid DNA, CTP (KH
9-AtOEP34)
[58], and CPP (BP100)
[54] as a complex system to deliver DNAs into chloroplasts
[56]. Further, they used the above complexes as nanocarriers, transfecting the plasmid DNA into chloroplasts after spraying on leaf surfaces
[60]. The CTP/DNA complexes were transported from the extracellular space to the chloroplast stroma in
Arabidopsis leaves
[59]. These studies on the CPP(CTP)/DNA complex system dramatically enhanced the transgenesis without protoplast preparations nor callus formations, and provided a useful tool for rapid and effective plastids engineering in plants.
3.3. Mitochondria
Mitochondrion is another valuable target in plant genetic modification. Mitochondria are the energy-producing organelles that contain the plasma membrane-like double membranes, their own genome (i.e., mitochondrial DNA; mtDNA), and a transcription-translation system
[74]. mtDNA is a small and circular double-stranded DNA, similar to a plasmid DNA. This characteristic challenges scientists studying mtDNA modifications
[74]. However, many factors, such as low transgenic efficiency, poor cytosolic entry, complicated preparation protocols, high mobility of mitochondria, and a limited number of cargo types, remain to be resolved before gene delivery into the mitochondria of plant cells can be widely used
[24][55].
Foreign DNAs or cargoes tagged with mitochondrial targeting sequence (MTS) have a higher chance to be transported to mitochondria
[24]. MTS, like CTP, is a short peptide signal, which is recognized by mitochondrial outer membrane receptor complex and interacts with components in mitochondrial protein import pathway
[75]. The exciting mitochondrial transgenic results were first published by Chuah et al.
[54]. They fused MTS with cationic lysine/histidine repeat residues ((KH)
9), becoming the fused peptide MTP
KH, and this MTP
KH formed complexes with CPPs (BP100). CPP/plasmid DNA complexes penetrated plasma membrane through CPPs, while MTP
KH/DNA complexes were found to be localized into mitochondria
[54]. The
Renilla luciferase gene expression in mitochondria of
A. thaliana illustrated that CPP-mediated gene delivery can be applied in mitochondrial transgenic engineering
[54]. Recently, Xiao et al. developed two novel cell-penetrating mitochondrial-targeting Mito
Ligand ligands (miniCPM3 and SeSe-TPP) that contain 2~3 hydrophobic aromatic amino acids and 3~4 arginine residues
[24]. This ligand design included the MTS conserved sequence, a hydrophobic-, and a cationic-rich amphipathic helix
[75]. They found that Mito
Ligand-delivered cargoes were predominantly localized inside mitochondria after cellular uptake and endosomal escape
[24]. Artificial peptide (LURL)
3 was another novel cell-penetrating MTS that demonstrates the importance of hydrophobicity and helicity for mitochondrial localization
[55]. Together, these effective peptide-based methods provide a starting point for the development of more sophisticated plant mitochondrial transfection strategies.