Physical Sciences | Encyclopedia MDPI

Subject:

Sort:

Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)

Type:

All Topic Review Biography

Topic Review

List of Unnumbered Minor Planets: 2002 T–Y

This is a partial list of unnumbered minor planets for principal designations assigned between 1 October 2002 and 31 December 2002 (T–Y).

309
10 Nov 2022

Topic Review

Pakistan Institute of Nuclear Science & Technology

Located in Nilore, it maintains a broad portfolio in providing post-graduate and post-doctoral research opportunities in supercomputing, renewable energy, physical, philosophical, materials, environmental, and mathematical sciences. Researchers and scholars are invited from universities throughout Pakistan.

729
10 Nov 2022

Topic Review

List of Unnumbered Minor Planets: 2002 P–Q

This is a partial list of unnumbered minor planets for principal designations assigned between 1 August 2002 and 31 August 2002 (P–Q).

325
10 Nov 2022

Topic Review

In orbital mechanics (subfield of celestial mechanics), Gauss's method is used for preliminary orbit determination from at least three observations (more observations increases the accuracy of the determined orbit) of the orbiting body of interest at three different times. The required information are the times of observations, the position vectors of the observation points (in Equatorial Coordinate System), the direction cosine vector of the orbiting body from the observation points (from Topocentric Equatorial Coordinate System) and general physical data. Carl Friedrich Gauss developed important mathematical techniques (summed up in Gauss's methods) which were specifically used to determine the orbit of Ceres. The method shown following is the orbit determination of an orbiting body about the focal body where the observations were taken from, whereas the method for determining Ceres' orbit requires a bit more effort because the observations were taken from Earth while Ceres orbits the Sun.

1.4K
10 Nov 2022

Topic Review

Bose–Hubbard Model

The Bose–Hubbard model gives a description of the physics of interacting spinless bosons on a lattice. It is closely related to the Hubbard model which originated in solid-state physics as an approximate description of superconducting systems and the motion of electrons between the atoms of a crystalline solid. The model was first introduced by Gersch and Knollman in 1963 in the context of granular superconductors. (The term 'Bose' in its name refers to the fact that the particles in the system are bosonic.) The model rose to prominence in the 1980s after it was found to capture the essence of the superfluid-insulator transition in a way that was much more mathematically tractable than fermionic metal-insulator models. The Bose–Hubbard model can be used to describe physical systems such as bosonic atoms in an optical lattice, as well as certain magnetic insulators. Furthermore, it can also be generalized and applied to Bose–Fermi mixtures, in which case the corresponding Hamiltonian is called the Bose–Fermi–Hubbard Hamiltonian.

901
10 Nov 2022

Topic Review

Energy Accidents

Energy resources bring with them great social and economic promise, providing financial growth for communities and energy services for local economies. However, the infrastructure which delivers energy services can break down in an energy accident, sometimes causing much damage, and energy fatalities can occur, and with many systems often deaths will happen even when the systems are working as intended. Historically, coal mining has been the most dangerous energy activity and the list of historical coal mining disasters is a long one. Underground mining hazards include suffocation, gas poisoning, roof collapse and gas explosions. Open cut mining hazards are principally mine wall failures and vehicle collisions. In the US alone, more than 100,000 coal miners have been killed in accidents over the past century, with more than 3,200 dying in 1907 alone. According to Benjamin K. Sovacool, 279 major energy accidents occurred from 1907 to 2007 and they caused 182,156 deaths with $41 billion in property damages, with these figures not including deaths from smaller accidents. However, by far the greatest energy fatalities that result from energy generation by humanity, is the creation of air pollution. The most lethal of which, particulate matter, which is primarily generated from the burning of fossil fuels and biomass is (counting outdoor air pollution effects only) estimated to cause 2.1 million deaths annually.

408
10 Nov 2022

Topic Review

Virtual Breakdown Mechanism

The Virtual breakdown mechanism is a concept in the field of electrochemistry. In electrochemical reactions, when the cathode and the anode are close enough to each other (i.e., so-called "nanogap electrochemical cells"), the double layer the regions from the two electrodes is overlapped, forming a large electric field uniformly distributed inside the entire electrode gap. Such high electric fields can significantly enhance the ion migration inside bulk solutions and thus increase the entire reaction rate, akin to the "breakdown" of the reactant(s). However, it is fundamentally different from the traditional "breakdown". The Virtual breakdown mechanism was discovered in 2017 when researchers studied pure water electrolysis based on deep-sub-Debye-length nanogap electrochemical cells. Furthermore, researchers found the relation of the gap distance between cathodes and anodes to the performance of electrochemical reactions.

430
10 Nov 2022

Topic Review

In physics and materials science, plasticity, also known as plastic deformation, is the ability of a solid material to undergo permanent deformation, a non-reversible change of shape in response to applied forces. For example, a solid piece of metal being bent or pounded into a new shape displays plasticity as permanent changes occur within the material itself. In engineering, the transition from elastic behavior to plastic behavior is known as yielding. Plastic deformation is observed in most materials, particularly metals, soils, rocks, concrete, and foams. However, the physical mechanisms that cause plastic deformation can vary widely. At a crystalline scale, plasticity in metals is usually a consequence of dislocations. Such defects are relatively rare in most crystalline materials, but are numerous in some and part of their crystal structure; in such cases, plastic crystallinity can result. In brittle materials such as rock, concrete and bone, plasticity is caused predominantly by slip at microcracks. In cellular materials such as liquid foams or biological tissues, plasticity is mainly a consequence of bubble or cell rearrangements, notably T1 processes. For many ductile metals, tensile loading applied to a sample will cause it to behave in an elastic manner. Each increment of load is accompanied by a proportional increment in extension. When the load is removed, the piece returns to its original size. However, once the load exceeds a threshold – the yield strength – the extension increases more rapidly than in the elastic region; now when the load is removed, some degree of extension will remain. Elastic deformation, however, is an approximation and its quality depends on the time frame considered and loading speed. If, as indicated in the graph opposite, the deformation includes elastic deformation, it is also often referred to as "elasto-plastic deformation" or "elastic-plastic deformation". Perfect plasticity is a property of materials to undergo irreversible deformation without any increase in stresses or loads. Plastic materials that have been hardened by prior deformation, such as cold forming, may need increasingly higher stresses to deform further. Generally, plastic deformation is also dependent on the deformation speed, i.e. higher stresses usually have to be applied to increase the rate of deformation. Such materials are said to deform visco-plastically.

1.7K
10 Nov 2022

Topic Review

Osmium (76Os) has seven naturally occurring isotopes, five of which are stable: 187Os, 188Os, 189Os, 190Os, and (most abundant) 192Os. The other natural isotopes, 184Os, and 186Os, have extremely long half-life (1.12×1013 years and 2×1015 years, respectively) and for practical purposes can be considered to be stable as well. 187Os is the daughter of 187Re (half-life 4.56×1010 years) and is most often measured in an 187Os/188Os ratio. This ratio, as well as the 187Re/188Os ratio, have been used extensively in dating terrestrial as well as meteoric rocks. It has also been used to measure the intensity of continental weathering over geologic time and to fix minimum ages for stabilization of the mantle roots of continental cratons. However, the most notable application of Os in dating has been in conjunction with iridium, to analyze the layer of shocked quartz along the Cretaceous–Paleogene boundary that marks the extinction of the dinosaurs 66 million years ago. There are also 30 artificial radioisotopes, the longest-lived of which is 194Os with a half-life of six years; all others have half-lives under 94 days. There are also nine known nuclear isomers, the longest-lived of which is 191mOs with a half-life of 13.10 hours. All isotopes and nuclear isomers of osmium are either radioactive or observationally stable, meaning that they are predicted to be radioactive but no actual decay has been observed.

201
10 Nov 2022

Topic Review

In quantum mechanics, a parity transformation (also called parity inversion) is the flip in the sign of one spatial coordinate. In three dimensions, it can also refer to the simultaneous flip in the sign of all three spatial coordinates (a point reflection): It can also be thought of as a test for chirality of a physical phenomenon, in that a parity inversion transforms a phenomenon into its mirror image. All fundamental interactions of elementary particles, with the exception of the weak interaction, are symmetric under parity. The weak interaction is chiral and thus provides a means for probing chirality in physics. In interactions that are symmetric under parity, such as electromagnetism in atomic and molecular physics, parity serves as a powerful controlling principle underlying quantum transitions. A matrix representation of P (in any number of dimensions) has determinant equal to −1, and hence is distinct from a rotation, which has a determinant equal to 1. In a two-dimensional plane, a simultaneous flip of all coordinates in sign is not a parity transformation; it is the same as a 180° rotation. In quantum mechanics, wave functions that are unchanged by a parity transformation are described as even functions, while those that change sign under a parity transformation are odd functions.

2.0K
10 Nov 2022

Page
of
118

Featured Entry Collections

>>

Featured Books

>>

Encyclopedia of Social Sciences

Encyclopedia of Social Sciences
Chief Editor:
Michael McAleer

Encyclopedia of COVID-19

Encyclopedia of COVID-19
Chief Editor:
Stephen Bustin

Encyclopedia of Fungi

Encyclopedia of Fungi
Chief Editor:
Luis V. Lopez-Llorca

Encyclopedia of Digital Society, Industry 5.0 and Smart City

Encyclopedia of Digital Society, Industry 5.0 and Smart City
Chief Editor:
Sandro Serpa

Video Production Service

Feedback

Top