Legumes play a special role in this process, as they have unique characteristics with respect to storing protein and many other important components in their seeds that are useful for human and animal nutrition as well as industry and agriculture. A great advantage of legumes is the nitrogen fixation activity of their symbiotic nodule bacteria. This nitrogen self-sufficiency contributes directly to the challenging issue of feeding the world’s growing population. Molybdenum is one of the most sought-after nutrients because it provides optimal conditions for the maximum efficiency of the enzymes involved in nitrogen assimilation as well as other molybdenum-containing enzymes in the host plant and symbiotic nodule bacteria. Molybdenum supply improves seed quality and allows for the efficient use of the micronutrient by molybdenum-containing enzymes in the plant and subsequently the nodules at the initial stages of growth after germination. A sufficient supply of molybdenum avoids competition for this trace element between nitrogenase and nodule nitrate reductase, which enhances the supply of nitrogen to the plant
1. Introduction
Grain legumes are unique plants containing a significant portion of protein that provide humans with nutrition and ensure their biosecurity
[1][2]. The uniqueness of legumes lies not only in the fact that they, like soybeans, store a considerable amount of vegetable protein and oil in the grain but also in their supply of diverse beneficial elements for humans and animals, including phytohormones, trace elements, vitamins, isoflavones, and other nutritional requirements. However, the main advantage of legumes is the presence of symbiotic nodule bacteria that fix atmospheric nitrogen
[3]. Legumes are an essential component of the nitrogen cycle in nature. They replenish bound nitrogen in the ecosystem via the assimilation of atmospheric nitrogen through a very particular relationship in symbiosis with nodulating bacteria. For plants, the particular importance of this method of nitrogen supply is that it allows them to synthesize significant amounts of nitrogen-containing compounds and eventually produce high yields of high-protein grain and green biomass with little or no additional mineral nitrogen fertilizers. Under symbiotic conditions, the plant provides the bacteria with a niche containing a metered supply of oxygen and fixed carbon, in which they form bacteroides. The bacteroides, in turn, supply the plant with nitrogen obtained from the atmosphere that can be converted into organic compounds and used in plant metabolism
[4].
It is due to this symbiotic nitrogen fixation that modern high-protein legume varieties have become one of the most important strategic sources of food supply for humans and animals and an important component of raw industrial materials
[5]. Therefore, a considerable increase in the use of legumes and the optimization of the legume–rhizobia symbiosis are of the utmost importance for the construction of stable and sustainable agriculture as well as to obtain high yields.
The desire to produce more environmentally friendly products necessitates the intensification of legume use. In modern farming, the nitrogen needs of legume crops are satisfied by the biological fixation of atmospheric nitrogen as well as by the provision of small quantities of mineral nitrogen that act as a top-up due to the large nitrogen export with the crop
[4]. Nitrogenase alone is insufficient for modern high-yielding legume types and results in decreased yields
[3][5].
Numerous factors contribute to the efficient operation of the symbiosis with nodule bacteria. One of these factors is the saturation of molybdenum-containing enzymes with adequate molybdenum content. Molybdenum is an important component of two cofactors of nitrogen-assimilating enzymes, FeMoCo of nitrogenase and Moco of nitrate reductase, as well as all other molybdenum-containing Moco enzymes of both partners
[6] (
Figure 1). The FeMo cofactor is a large Fe
7MoS
9C cluster composed of one iron (III) sulfide cluster and one MoFe
3S
3 cluster linked by three sulfide ligands and a bridging carbon atom. The nitrogenase enzyme of the rhizobial nodule symbiont assimilates molecular nitrogen from the atmosphere in the form of ammonia, while nitrate reductase allows for the reduction of nitrate from the soil. For these enzymes to function efficiently throughout the growing season, the timely delivery of molybdenum to their active center is essential. Five molybdenum-containing enzymes that require molybdenum for their activity have been found in plants: nitrate reductase (NR), sulfite oxidase (SO), aldehyde oxidase (AO), xanthine dehydrogenase (XDH), and mitochondrial amidoxime-reducing component (mARC)
[7][8][9]. In these enzymes, molybdenum is chelated to a pterin, forming the molybdenum cofactor (Moco)
[8][10][11][12]. Detailed information about the Moco biosynthesis pathway is well documented
[13][14][15][16][17][18].
Figure 1. Moco of molybdenum-containing enzymes in eukaryotic (
A,
B) and prokaryotic (
C–
E) organisms and FeMo-co of nitrogenase (
F). The SO family enzymes carry a cofactor with a molybdenum ligation with one oxo, one hydroxide, and one cysteine ligand from the protein backbone. The XO family enzymes have a cofactor containing sulfido- and oxido-ligands
[13][19]. Mo-MPT of the SO family (
A,
C); the sulfurated forms of the XO family (
B,
D): the molybdopterin with additional cytosine dinucleotide MCD cofactor of
E. coli (
D1) and Mo-MPT in other bacteria (
D2); two forms of the DMSO reductase family (
E1,
E2): bis-Mo-MPT (
E1) and molybdopterin guanine dinucleotide bis-MGD cofactor (
E2) where the molybdenum atom has an additional fifth ligand, an O/S, and a sixth ligand can vary becoming a cysteine, a serine, a selenocysteine, an aspartate, or a hydroxide ligand
[20].
The domain structure of molybdenum-containing eukaryotic enzymes is shown in
Figure 2. These molybdenum-containing enzymes are involved in crucial biological processes such as nitrate assimilation, phytohormone biosynthesis, purine metabolism, sulfite detoxification, the reduction of hydroxylated compounds, and the synthesis of nitric oxide from nitrite. Thus, molybdenum is essential for plant growth and development
[21]. In addition, nitrogenase, nitrate reductase, and several other molybdenum-containing enzymes are found in the nodules of legumes.
Figure 2. Domain structure of molybdenum-containing eukaryotic enzymes of the sulfite oxidase (SO) and xanthine oxidase (XO) families. Mitochondrial amidoxime-reducing component (mARC) exhibits combined characteristics of both SO and XO families
[22]. NR—nitrate reductase; AO—aldehyde oxidase; and DI—dimerization domain.
Molybdenum is considered one of the most important trace elements regulating various physiological and biochemical phenomena in plants, especially in the case of legume crops
[23][24][25][26] for symbiotic nitrogen fixation
[27][28][29]. Nitrogen metabolism in legumes is closely related to molybdenum availability
[30]; thus, they require much more of it than other plants
[31][32][33]. In the case of molybdenum deficiency, a lack of nutrients—nitrogen in particular—prevents the normal growth and development of legume crops
[34][35]. It has been observed that
Rhizobium’s molybdenum requirements for nitrogen fixation are about ten times higher than that of legume hosts for protein synthesis
[36]. The efficiency of the rhizobial complex increases when legumes are provided with sufficient molybdenum
[37], contributing to their production potential
[12].
However, as with any other heavy metal, molybdenum can be toxic to plants in high doses. This has been documented in several publications
[38][39][40]. The upper level of acceptable molybdenum intake has been set at 2 mg/day, based on reproduction and growth disorders observed in animals
[41]. Therefore, it is necessary to take into account the sensitivity of legume crops to micronutrient excess while simultaneously working within a range sufficient for plant enrichment to obtain high-quality and non-toxic yields for animals and humans.
2. Molybdenum Entry and Transport in Leguminous Plants
Molybdenum exists predominantly in its most oxidized form, the molybdate oxyanion (MoO
42−), which is the major form predominant in soil solutions with pH levels above 4.2
[42] and can be absorbed by plant roots. In many soil types, a low bioavailability of trace elements predominates, leading to insufficient supply in leguminous plants. In response to Mo-limiting conditions, the endosymbiotic rhizobia in root nodule cortex cells reduce nitrogen fixation. Decreased molybdate bioavailability can occur in acidic soils (pH below 4.3) as a result of protonation to HMoO
4− or MoO
3 (H
2O)
3 [43] or strong absorption by iron oxyhydroxide, which is not bioavailable to plants
[43].
In response to low molybdenum intake, plants have mechanisms that regulate molybdenum uptake, transport, and storage to adapt to Mo-deficient environments. Molybdenum homeostasis in plant cells is tightly controlled and likely plays a vital role in plant adaptation to the environment
[21]. Thus, molybdenum is not only an essential element for plant growth and development but may also play an important role in the regulation of plant adaptation to adverse environmental conditions.
Molybdenum is absorbed inside the cell in the form of molybdate. High-affinity transport systems are involved in this process
[44]. Its further incorporation into the molybdenum cofactor precursor molybdopterin (MPT), a unique tricyclic pterin, does not require molybdate activation
[45][46]; this process is described in detail in a review by Magalon and Mendel
[47]. Thus, molybdenum is absorbed, transported, and most likely accumulated in the same molybdate form.
In order for molybdate from the plant to reach the nodular bacterial cofactor of nitrogenase FeMoco, it must cross the cell plasma membranes and peribacteroidal membranes of the nodules as well as the outer and inner membranes of the bacteroid
[48].
In addition to the nonspecific pathway of molybdenum uptake into plants, two families of molybdate-specific transporters, MOT1 and MOT2
[21][49], have been identified in eukaryotes that ensure molybdate enters the cell through the plasma membrane. The
MOT1 transporter gene is found only in the genomes of algae, mosses, and higher plants. In contrast to the single copy of
MOT1 found in the green alga
C. reinhardtii [50], up to seven
MOT1 copies are found in higher plants. Two copies of
MOT1 are present in
Arabidopsis [51][52], rice, and maize, and more than four copies are found in plants of the legume family, including
Lotus japonicas,
Medicago truncatula, and soybean (
Glycine max)
[21]. A comparison of MOT1 homology in legume plants showed a high similarity between legume MOT1 and other MOT1 proteins from different organisms
[53]. The increase in
MOT1 copy number encoded by legume genomes is likely related to the need to bind more molybdenum, which is required for FeMoco nitrogenase biosynthesis to enable symbiotic nitrogen fixation. Molybdenum has been shown to be transported by two of the five MtMOT1;2 and MtMOT1;3 transporters in
M. truncatula [54][55].
Although MOT1 plays a critical role in molybdenum uptake and transport depending on the level of molybdenum added
[51][52][56], the precise determination of its function has been difficult
[53]. The determination of its precise subcellular localization also interferes with this.
MOT2 superfamily proteins are different from MOT1 proteins and have been found in plants and animals. It should be noted that the MOT2 family of transporters was first identified molecularly in
Chlamydomonas [57]. MOT2 shows a lower affinity for molybdate transport (Km 550 nM) than MOT1 and is blocked by tungsten. Of particular interest is that the expression of the
MOT2 gene is activated by molybdate deficiency and is unresponsive to nitrate availability. The latter represents an opposite regulation to that of
MOT1 [58].
It is also important to note the important cellular proteins that are involved in the transport, distribution, and incorporation of the pterin cofactor into molybdenum enzymes which lack Moco-dependent enzymatic activity, e.g., the homotetrameric Moco transfer protein (
MCP1) found in the green alga
Chlamydomonas reinhardtii [14]. This protein has a high Moco binding affinity and plays a key role in maintaining and storing the cofactor in its active form under aerobic conditions
[59]. MCP and other similar proteins have been described in various plant species
[14].
3. Molybdenum Distribution and Recycling in Ontogenesis and Accumulation in Seeds
During the course of ontogenesis, molybdenum requirements and its accumulation in different plant organs vary significantly. This is due to changes in the intensity and localization of processes involving this trace element. Molybdenum is rapidly assimilated and transported through the plant as molybdate
[60][61]. During the growing season, molybdenum is unevenly distributed in the plant and rapidly moves from one organ to another. In yellow lupine, the plant begins to absorb molybdenum from the soil in the seedling phase, a process that gradually intensifies until the phase of fruit formation. Molybdenum uptake in soybean, in contrast to lupine, starts only 25–30 days after sowing
[62]. From the beginning of the grain formation phase, the uptake of molybdenum from the soil by lupine stops, and it is redistributed among the organs of the plant. At this point, the outflow of molybdenum from stems, nodules, and—to a lesser extent—leaves to the forming beans begins. In contrast to lupine, the outflow of molybdenum from stems and nodules in soybeans to seeds during this growth phase is insignificant
[62]. Molybdenum gradually moves through the plant during ontogenesis, accumulating in stems, nodules, and finally reproductive organs and seeds. The accumulation of mineral nutrients in seeds is determined by a series of complex processes that begin with uptake from the rhizosphere, membrane transport in roots, translocation and redistribution within plants through xylem and phloem systems, and import and deposition in seeds
[63]. During the development of legume seeds, various nutrients, including mineral compounds, are stored there. Mineral accumulation in seeds depends on the continuous absorption, movement, and recycling of mineral nutrients from vegetative organs and tissues, as well as senescent nodules, to their storage sites, the reproductive organ pods, and seeds. Most of these minerals eventually enter the seeds through the phloem pathway
[64].
4. Forms of Molybdenum in Legume Seeds
Legumes are known for their ability to concentrate molybdenum in significant quantities without causing a negative effect on themselves
[65][66]. When molybdenum fertilizers are applied, legumes can concentrate the element almost in proportion to the doses applied
[65]. Many representatives of the family
Leguminosae accumulate significant amounts of this trace element in their seeds. When lupine is fertilized with molybdenum, the content of trace element in the seeds increases by 7–20 times when compared with controls
[67].
The form in which molybdenum is contained in the seeds of leguminous plants has not yet been fully clarified. In plants, molybdenum is found in a mobile, easily extractable state, and only a small part is bound to proteins
[68][69]. The distribution of molybdenum in the morphological parts of lupine seeds (germ axils, cotyledon, and seed coat) remains relatively constant and depends little on the availability of the micronutrient. The highest specific content of molybdenum is found in germ axils and its main stock, reaching 90% in cotyledons. Consequently, the molybdenum enrichment of seeds occurs mainly at the expense of seedpods. Some researchers have observed a large variety of compounds of pterin nature in the seedpods and roots of germinating soybean seeds
[70], which could indicate the presence of molybdenum-containing enzymes with Moco
[18].
It has proven challenging to determine the enzymatic activity of molybdenum-containing plant proteins in dry lupin seeds. In one study, the presence of Moco was determined using the standard method involving a complementation reaction with the
nit-1 mutant of
Neuspora crassa [71], which allows for the detection of any type of Moco (free and bound) that can be incorporated into the mutant apoprotein. However, in other studies, the confirmation of the presence of two molybdenum-containing proteins in dried yellow lupin seeds was obtained using a highly sensitive method involving the radioactive isotope tungsten as an analog of molybdate
[72][73]. By using radioactive tungsten labeling “in vitro” on a radioautograph gel after the electrophoresis of lupine seed extract, it was possible to detect two intense radioactive bands corresponding to proteins that were bound in significantly higher amounts than other proteins in the extract.
The results of a size exclusion chromatography study of pea and lentil seed extracts where molybdenum species were quantified via SEC-ICP-MS showed that the elution profiles of molybdenum were quite different between the two extracts
[74]. In the lentil extract, the main peak of molybdenum appeared in the high molecular weight region (about 200,000
w/
w) accompanied by another in the low-molecular-weight region (<2000
w/
w), whereas in pea extract (similar to white beans and soybean meal
[75]) almost all molybdenum was eluted from the column as one peak in the low molecular weight region. Additional similar experiments were also carried out
[76].
5. Competition for Molybdenum and the After-Effects of Its Accumulation in Seeds
In the initial growth period, as noted for soybean and lupine
[69][77], molybdenum gradually moves from the cotyledons to become localized in young shoots. During the germination phase, the trace element is intensively accumulated in stems. This organ retains its leading position in molybdenum accumulation in plants up until the nodulation stage. Most of the initial stock of molybdenum in the seeds is transferred to the plant before the flowering stage. The delivery of metals to seeds and young leaves appears to occur through the phloem
[78]. In stem nodes and minor veins, the metal is most likely transferred from the xylem to the phloem
[79]. This initial molybdenum storage in the seeds is important for the initial growth phases of lupine, determining the intensity of nitrate assimilation. The initial stock of molybdenum in the seeds also has a significant influence on the later phases of growth. After nodulation (the four-leaf phase), significant amounts of molybdenum (30–35% of the total molybdenum in the plant) are present, transported mainly from the lupine seed cotyledons
[68][69][80]. The molybdenum reserve in seeds provides enough for the initial requirements of the emerging plant in the early stages of growth and is therefore crucial for nitrogen nutrition in legumes.
The mechanism underlying molybdenum accumulation in plants is not yet well understood. However, it is of considerable interest, especially in the case of symbiotic systems, where the functioning of the enzymatic systems in the host plant and the symbiont bacteria depends on the amount of molybdenum accumulated in the seeds. Plants grown from molybdenum-enriched seeds have increased nitrate reductase and nitrogenase activity, which ultimately leads to additional yields. Thus, molybdenum accumulation in the first year can have a positive effect on two generations of plants
[60].
The effects of applying molybdenum to legumes are beneficial in terms of improving the functionality and efficiency of the rhizobial complex to provide nitrogen to the plant, increasing yields, and accumulating trace elements in the seeds. Biological nitrogen fixation is stimulated when molybdenum is applied to legumes, particularly soybeans
[81].
Grain legumes show the highest need for molybdenum during budding and early flowering, a lack of which inhibits the formation of a symbiotic nitrogen fixation system and the simultaneous use of two sources of nitrogen by the plant: molecular nitrogen during nitrogen fixation and nitrate nitrogen during nitrate reduction
[68][80]. When a molybdenum deficiency occurs, all trace elements available in the nodules and coming from the soil are incorporated into nitrogenase, and the plant is deprived of the opportunity to use nitrate and molecular nitrogen simultaneously for nutrition.
A determination of nitrate reductase activity in the different organs of lupine showed that this activity was significantly stimulated by molybdenum supplementation in the leaves and nodules, while in the roots, where nitrate reductase activity is rather low, the stimulation was weaker. Nitrogen and molybdenum feeding showed no advantage over molybdenum feeding alone. Furthermore, an especially strong stimulation of nitrate reductase activity (3.5 times) was observed in a variant where seeds from the previous year enriched with molybdenum due to the foliar feeding of lupine with molybdenum were used (22.2 mg/g; the control had 10.4 mkg/g).
In these studies, the application of molybdenum at the budding/early flowering phase as well as the after-effect of molybdenum accumulation in the seeds caused by the foliar feeding of lupine with molybdenum in the previous year, resulted in the stimulation of nitrogen fixation activity in the nodules. Hamaguchi also indicated that the enrichment of the seeds with molybdenum eventually increased the biological nitrogen fixation, growth, and yield of the crop
[82].
Molybdenum fertilization increases the protein content
[83] of legume seeds and leads to a significant accumulation of molybdenum within them. In one study, a foliar application was found to be more efficient in producing enriched molybdenum seeds
[81] than seed treatment with microelements. Similar findings were obtained in yellow lupine, where pre-sowing treatment was effective only in three out of four years
[68][69].
Plants grown from molybdenum-enriched seeds have significantly higher nitrate reductase activity than control plants or plants that receive molybdenum from seed treatments before sowing
[68]. Thus, the molybdenum contained in seeds has a significant impact on the growth of plants and most effectively supplies their needs for this micronutrient. A direct correlation between molybdenum content in seeds and yield has also been shown for soybeans
[77][84][85][86]. Sowing seeds with a high molybdenum content has also been shown to improve the growth and nodulation of
Phaseolus vulgaris plants. Furthermore, research also shows the benefits of seeds with high concentrations of molybdenum for improved bean yields
[87][88].
On the contrary, low molybdenum in seeds sharply hinders nitrogen fixation and nitrate assimilation before the phase of budding, causing delayed plant growth and simultaneously reducing the absorption of molybdenum from the soil during the time where demand for this trace element in soybean is at a maximum
[62][89]. Molybdenum content in seeds is the most informative indicator of the degree of plant provision of this trace element
[90].
During the pre-sowing treatment of soybean seeds with molybdenum salts, only a small proportion of the trace element passes from the initial seeds to the seeds of the future crop
[77][84]. The substantial accumulation of molybdenum in seeds, required to cause its after-effect, occurs only with the foliar feeding of lupine in the phase of its maximum demand for this trace element. This ensures the effect of molybdenum by enhancing the mechanisms of nitrogen assimilation, which ultimately increases the seed yield.
6. Benefits of Sufficient Molybdenum Intake in Legumes
Since molybdenum is a component of numerous molybdenum-containing enzymes found in the symbiotic system of leguminous plants, its influence is far from being limited to participation only in nitrogen assimilation (Table 1).
Table 1. The main function of eukaryotic Moco-containing enzymes.
Enzyme |
Function |
nitrate reductase (NR) |
NR catalyzes two-electron reduction of nitrate to nitrite as a key step of the inorganic nitrogen assimilation pathway [7]. NR may play a role in NO homeostasis by supplying electrons from NAD(P)H through its diaphorase/dehydrogenase domain [91]. NO3− + NAD(P)H + H+ = NO2− + NAD(P)+ + H2O |
sulfite oxidase (SO) |
SO catalyzes the two-electron oxidation of sulfite to sulfate, the final step in the degradation of sulfur-containing amino acids in sulfur catabolism [7]. In plants, SO is involved in plant protection from sulfite toxicity under a SO2-rich atmosphere [92]. SO32− + H2O + O2 → SO42− + H2O2 |
mitochondrial amidoxime reducing component (mARC); NO forming nitrite reductase (NOFNiR) |
mARC catalyzes the reduction of hydroxylated compounds, mostly N-hydroxylated nucleobases and nucleosides: N-hydroxycytosine (NHC), the base analogue of 6-hydroxylaminopurine (HAP; in plants [93]), N-hydroxycytidine, and N-hydroxyadenosine [58][94]. NOFNiR activity can catalyze nitric oxide (NO) formation from nitrite and is strictly dependent on NR diaphorase activity but is independent of the NR Moco domain [95][96][97]. Plant NRmARC complex is an efficient mechanism for NO synthesis under physiological conditions, aerobiosis, and in the presence of both nitrate and nitrite. oxime + NADH = imine + NAD+ or amine − N-oxide + NADH = amine + NAD+ |
xanthine oxidoreductase (XOR) |
XOR performs the last two steps of purine catabolism by mediating the oxidation of hypoxanthine to xanthine and xanthine to uric acid [7] (xanthine dehydrogenase (XDH) activity); participates in purine catabolism that produces reactive oxygen species (ROS) [98] (xanthine oxidase (XO) activity); generates nitric oxide (nitrite reductase activity); and shows NADH oxidase activity yielding NAD+ and superoxide [99] (NADH oxidase activity) [100]. Plant XOR can participate in reactive oxygen species metabolism, contributing to pathogen resistance by generating H2O2, and it can also produce uric acid and remove H2O2 from chloroplasts under conditions of oxidative stress [101]. |
aldehyde oxidase (AO) |
AO oxidizes a variety of aldehydes, purines, pteridines, and heterocycles with O2 as the terminal electron acceptor generating H2O2 [102]. AO is essential for the biosynthesis of the stress hormone abscisic acid and indole-3-acetic acid in plants [7]. aldehyde + H2O + O2 = carboxylate + H2O2 |
7. Genetic Approaches to Improve Molybdenum Supply in Legumes
Since molybdenum is fundamental to legume nutrition, the practice of genotyping using GBS sequencing to identify quantitative trait loci (QTLs) and single nucleotide polymorphisms (SNPs) and subsequently the candidate genes associated with this trace element (controlling uptake, transport, and accumulation) is necessary to understand all mechanisms of its control and regulation, as well as its influence on nitrogen fixation and other processes related to molybdenum utilization. Little is known about the molecular basis of intraspecific variability and the characteristics of allelic variants in relation to these processes
[103]. Knowledge regarding genetic variability in candidate genes related to molybdenum metabolism, biological nitrogen fixation, and the characteristics of genetic variants reflecting phenotypic variability will be useful for the molecular diagnosis and breeding of leguminous plants. Ultimately, this knowledge will be useful in increasing our understanding of the inheritance of symbiotic relationships using molybdenum metabolism as an example. The undoubted focus in this case rests on the complex process of biological nitrogen fixation, where many genes are involved. The amount of nitrogen normally fixed in the fields lags several times behind the potential amount of nitrogen that can be produced by nitrogen fixation
[104]. The efficiency of the rhizobial complex can be increased by 300% through plant selection and crop management
[105] and is favored by high heritability
[106]. Several hundred genes are responsible for the efficient operation of symbiosis and the regulation of nitrogen fixation
[107]. The identification of loci associated with nitrogen fixation efficiency via genomic techniques (high-throughput genotyping by sequencing) has been performed for legume plants such as
M. truncatula [108][109], red clover (
Trifolium pratense L.)
[110], and soybean
[111]. Using comparative genomic and transcriptomic analysis, the key regulatory genes providing nodulation and nitrogen fixation have been identified in some legumes, including
Pisum sativum L.,
Glycine max (L.) Merr.,
Phaseolus vulgaris L.
[112][113][114], and red clover
[103]. In
Trifolium pretense L., the molybdate transporter gene
MOT1 [103] was discovered in an attempt to identify variants in candidate genes related to the efficiency of biological nitrogen fixation.
ybdenum uptake, its redistribution throughout the plant, its distribution among symbionts, and its accumulation in reproductive organs. The identified SNPs for candidate genes associated with molybdenum metabolism may contribute to explaining its privileged position among other trace elements in terms of entry and accumulation in plants and to the understanding of seed enrichment by genomics-based breeding programs
[115].
8. Conclusions
In order to obtain consistently high yields of legume crops, together with the provision of balanced nutrition, the practice of monitoring plant health and the supply of essential nutritional elements is crucial. Molybdenum is a highly sought-after, trace element for most living things; therefore, its levels in cells and organisms as a whole should be strictly monitored.